Product Overview
Six-zone surveillance with active deterrence built in – this Hikvision ColorVu 3.0 kit pairs 6 x DS-2CD2367G3-LIS2UY/SL turret cameras with the DS-7608NI-M2/8P 8-channel PoE NVR and a pre-installed 4TB surveillance hard drive. Each turret camera uses a 1/1.8″ CMOS sensor and F1.0 Super Confocal lens to capture 6MP colour footage down to 0.0005 Lux, while Smart Hybrid Light switches between infrared and white-light illumination automatically based on detection events. When AcuSense 3.0 confirms a person or vehicle trigger, the camera’s built-in strobe and speaker activate to issue an immediate on-site response. The DS-7608NI-M2/8P handles all 6 cameras over plug-and-play PoE, records at full 6MP across every channel, and leaves 2 spare ports for future expansion. With IP67 and NEMA 4X-rated metal housings and 4TB of recording capacity, this kit suits driveways, shopfronts, warehouses, and residential perimeters needing both detailed colour footage and proactive deterrence.
Key Capabilities
ColorVu 3.0 with F1.0 Super Confocal Lens
The 1/1.8″ CMOS sensor paired with an F1.0 aperture lens captures vivid colour detail at 0.0005 Lux, meaning usable colour footage is produced in conditions that would leave a standard camera producing near-black imagery. The Super Confocal design maintains sharp focus across both IR and white-light spectrums simultaneously.
Smart Hybrid Light with Auto-Mode Switching
Each camera can operate in IR-only mode for discreet continuous monitoring, white-light mode for constant colour, or Smart Hybrid mode where it switches to white light automatically when a person or vehicle is detected. This preserves lamp life while ensuring colour detail is captured at the moment it matters most.
Active Deterrence: Strobe and Speaker Per Camera
Every DS-2CD2367G3-LIS2UY/SL in this kit has its own built-in strobe light and audible speaker. When a detection rule is triggered, the camera can issue an immediate on-site visual and audio warning without waiting for a monitoring centre response. This on-camera deterrence is particularly effective at driveways and shopfront entries.
AcuSense 3.0 Human and Vehicle Detection
On-board AcuSense 3.0 analytics classify motion as either a person, vehicle, or non-target movement. This filters out animals, foliage, and lighting changes as alert triggers, directing strobe and speaker responses only at genuine intrusion events and reducing the volume of unnecessary push notifications to connected mobile devices.
Two-Way Audio via Built-In Microphone and Speaker
Each camera includes dual built-in microphones and a built-in speaker, enabling live two-way voice communication through the DS-7608NI-M2/8P NVR or Hik-Connect app. This allows the site operator to speak directly through any camera on the system, useful for managing access points or challenging uninvited visitors remotely.
8-Channel PoE NVR with Expansion Headroom
The DS-7608NI-M2/8P provides 8 PoE ports for plug-and-play camera connection, records at full 6MP on all active channels, supports 4K display output via HDMI, and includes dual HDD bays. With 6 cameras occupying the kit, 2 ports remain available for adding extra cameras later without replacing the recorder.
Best For
- Residential Perimeter Coverage: 6 cameras provide enough coverage points for a typical home to monitor the front driveway, rear yard, side gates, and garage simultaneously, with Smart Hybrid Light delivering colour footage at each zone around the clock.
- Small Commercial Sites with After-Hours Risk: Shopfronts, cafes, and small warehouses where after-hours intrusion is a concern benefit from the combination of AcuSense-triggered strobe and speaker deterrence that activates before an incident escalates.
- Properties Needing Detailed Night Footage: Sites where identifying people or vehicles from recorded footage is a priority gain from the 6MP sensor and F1.0 lens producing colour-rich imagery at very low ambient light, unlike standard IR-only cameras that produce greyscale results after dark.
- Installers Commissioning Multi-Zone Systems Quickly: The plug-and-play PoE architecture means each camera requires only a single Cat5e or Cat6 cable run back to the NVR, simplifying installation across multiple mounting locations without separate power cabling.
- Sites Planning to Expand Later: With 2 spare PoE ports on the DS-7608NI-M2/8P and dual HDD bays, this kit can grow from 6 to 8 cameras and accommodate a second storage drive without changing the recorder.
Why Choose the DS-2CD2367G3-LIS2UY/SL + DS-7608NI-M2/8P Kit
Where a standard colour camera kit captures footage and waits for human review, this system adds a real-time deterrence layer at every camera position. The DS-2CD2367G3-LIS2UY/SL is not simply a colour camera with an F1.0 lens – it carries its own strobe, speaker, and dual microphone, meaning each of the 6 positions in this kit can respond to a confirmed person or vehicle detection independently, without relying on a central device to trigger the response. The AcuSense 3.0 classification engine running on-board each camera means those responses are directed at genuine threats rather than general motion. Paired with the DS-7608NI-M2/8P, which records all 6 channels at full 6MP resolution and allows remote live view and playback via Hik-Connect, the system delivers both evidence-quality recording and active site management. The pre-installed 4TB surveillance HDD and IP67/NEMA 4X-rated housings complete a kit that is ready to deploy outdoors from day one. Available at Security Wholesalers, this kit is suited to residential and light commercial projects where deterrence, colour detail, and system integrity are all required together.
Package Inclusions
Buyer Decision Tips
Lens Selection – 2.8mm vs 4mm: The 2.8mm option gives a 108.8-degree horizontal field of view, making it the better choice for open areas like driveways, rear yards, and car parks where wide coverage from a single mounting point is needed. The 4mm narrows to 93.3 degrees but delivers a tighter frame with more subject detail at distance, suited to corridor entries, front doors, and gates where you need to identify faces or number plates within a defined zone. If your site has a mix of open and narrow-angle locations, note in the order comments that you want different lens sizes per camera – this kit supports mixed lens selection on request.
Storage and Expansion Planning: The included 4TB drive in the DS-7608NI-M2/8P will handle approximately 14 to 20 days of continuous 6MP H.265+ recording across 6 cameras depending on scene complexity and motion frequency. The NVR has a second HDD bay available if you want to double storage capacity later without replacing the unit. Additionally, with 2 unused PoE ports remaining after connecting the 6 cameras, the same NVR can accommodate up to 8 cameras total if the site grows – there is no need to upgrade the recorder for a modest expansion.
Key Features & Technical Specifications
| Camera Model |
Hikvision DS-2CD2367G3-LIS2UY/SL |
| Image Sensor |
1/1.8″ Progressive Scan CMOS |
| Resolution |
3200 x 1800 (6MP) |
| Minimum Illumination |
0.0005 Lux @ F1.0, AGC ON |
| Lens Options |
2.8mm fixed or 4mm fixed |
| Horizontal Field of View |
2.8mm: 108.8 degrees / 4mm: 93.3 degrees |
| Night Vision Range |
Up to 30m IR and white light |
| WDR |
130dB True WDR |
| Light Mode |
Smart Hybrid Light – IR only, white light only, or auto-switching |
| Active Deterrence |
Built-in strobe light and speaker per camera |
| Audio |
Dual built-in microphones and built-in speaker (two-way audio) |
| Analytics |
AcuSense 3.0 – human and vehicle classification |
| Video Compression |
H.265+, H.265, H.264+, H.264 |
| Shutter Speed |
1/100,000s to 1s |
| Ingress Protection |
IP67 and NEMA 4X (metal housing) |
| NVR Model |
Hikvision DS-7608NI-M2/8P |
| NVR Channels / PoE Ports |
8 channels / 8 PoE ports |
| NVR Incoming Bandwidth |
128Mbps |
| NVR Video Output |
HDMI and VGA, up to 4K resolution |
| NVR HDD Bays / Included Storage |
Dual HDD bays / 4TB surveillance HDD pre-installed |
Ideal Use Cases
Residential Perimeter – Multi-Zone
A 6-camera layout covers a typical residential block with dedicated positions for the front driveway, rear yard, side access gates, and garage entry. Each DS-2CD2367G3-LIS2UY/SL produces 6MP colour footage across all zones, with Smart Hybrid Light activating white illumination when a person or vehicle is confirmed at any position.
Retail and Shopfront – After-Hours Deterrence
Shopfronts and small retail outlets face the highest after-hours intrusion risk. The strobe and speaker on each camera deliver an immediate on-site deterrent when AcuSense 3.0 detects a person approaching, before any physical contact with the building occurs. The 6MP sensor captures enough detail to support incident reporting.
Small Warehouse or Storage Facility
Warehouses with loading docks, roller doors, and yard access points benefit from having 6 independently deterrent-capable cameras across the facility. Each unit’s IP67 and NEMA 4X metal housing handles the temperature variation and dust exposure typical of industrial settings, and the 30m illumination range suits wide bay openings.
Construction Site or Temporary Compound
Sites with high after-hours theft exposure gain from the active strobe and audio response without needing a monitoring centre contract. The PoE connection simplifies cabling runs to a single cable per camera, and the rugged IP67 housing tolerates outdoor exposure during the build phase.
Child Care, School, or Community Facility
Facilities with public-facing outdoor areas and after-hours obligations benefit from AcuSense 3.0 filtering out non-threatening motion – animals, trees, passing traffic – so alerts are only generated by confirmed person or vehicle activity. Two-way audio through the camera’s built-in microphone and speaker also supports remote communication with visitors at entry points.
Remote Property or Rural Site
Where a fast police or guard response is not available, the on-camera strobe and audio deterrence built into each DS-2CD2367G3-LIS2UY/SL provides an independent first response at the point of intrusion. Remote live view and playback over Hik-Connect allows the owner to monitor the site from any location with an internet connection.
Choosing the Right Model
- Choose this kit if: You need 6 camera positions with active deterrence at each point, full-colour 6MP night vision across all zones, two-way audio capability at the camera level, and a pre-configured NVR with 2 spare ports for future expansion – all connected over PoE with a pre-installed 4TB drive ready to record.
- Choose a different kit if: Your site only requires 4 camera positions – a 4-camera version of this system is available with a 4-channel NVR at a lower entry cost, suited to smaller properties with fewer coverage zones. Alternatively, if your priority is long-range IR coverage rather than active deterrence – such as a long driveway or fence line requiring 50m or more of illumination range – a bullet-format camera kit may be better suited to those specific positions.
- Choose a different model if: Your application requires motorised zoom or remote pan/tilt capability. The DS-2CD2367G3-LIS2UY/SL uses a fixed lens only, and the kit cannot accommodate PTZ or varifocal cameras without changing the camera model entirely.
FAQs
- Does each camera in this kit have its own strobe and speaker, or is there a single central device?
Every DS-2CD2367G3-LIS2UY/SL in this kit has its own integrated strobe light and speaker. When an AcuSense 3.0 detection event triggers at any camera position, that specific camera responds on-site immediately. There is no central alarm panel or additional device required – each camera acts independently at the point of detection.
- Can I choose a different lens size for each camera in the kit?
Yes. The DS-2CD2367G3-LIS2UY/SL is available in either 2.8mm (108.8-degree horizontal FOV) or 4mm (93.3-degree horizontal FOV). If you need different lens sizes for different positions in your installation, add a note in the order comments at checkout specifying which lens each camera should be. The cameras will be supplied accordingly.
- How does Smart Hybrid Light differ from a standard white-light colour camera?
A standard white-light camera either leaves the white LEDs on continuously or switches them on with any motion. Smart Hybrid Light in the DS-2CD2367G3-LIS2UY/SL uses AcuSense 3.0 classification first – the white-light LEDs activate specifically when a person or vehicle is confirmed, not for general motion. In IR-only or Smart mode, the camera produces greyscale footage until a qualifying detection occurs, extending lamp life and reducing light pollution from the white LEDs.
- Does this kit support two-way audio?
Yes. Each DS-2CD2367G3-LIS2UY/SL has dual built-in microphones and a built-in speaker, enabling full two-way voice communication. Through the DS-7608NI-M2/8P NVR interface or the Hik-Connect mobile app, an operator can speak through any camera on the system and hear audio from the camera’s location in real time.
- How many days of footage will the 4TB hard drive store?
Recording duration depends on motion frequency, scene complexity, and compression settings. Under typical conditions using H.265+ compression with 6 cameras recording continuously at 6MP, 4TB generally provides between 14 and 20 days of storage. Enabling motion-only recording or adjusting the bitrate can extend this further. The DS-7608NI-M2/8P has a second HDD bay if additional storage is needed.
- Can I add more cameras to this system later?
Yes. The DS-7608NI-M2/8P has 8 PoE ports total, and this kit uses 6 of them, leaving 2 ports available for additional Hikvision IP cameras. No recorder upgrade is required to add up to 2 more cameras. If you need more than 8 cameras across the site, a higher-channel NVR would be required.
- Is the hard drive already installed and configured when the kit arrives?
Yes. The 4TB surveillance-grade hard drive is pre-installed in the DS-7608NI-M2/8P before dispatch. The NVR is formatted and ready for camera connection on arrival – there is no need to source, install, or format a separate drive. This kit is offered through Security Wholesalers with the HDD pre-fitted specifically so it can be deployed without additional setup steps.
- What is the IP67 and NEMA 4X rating on the cameras?
IP67 means the camera housings are fully dust-tight and can withstand temporary water immersion, making them suitable for exposed outdoor positions including eaves, soffits, and external walls subject to rain and humidity. NEMA 4X adds a corrosion-resistance requirement, which is relevant for coastal or industrial environments where salt air or chemical exposure may be a factor. Both ratings apply to the metal housing used on the DS-2CD2367G3-LIS2UY/SL.
Cabling Considerations
- Cable Type: Cat5e minimum for each camera run; Cat6 is recommended for runs over 50m or where future higher-bandwidth cameras may be added to the same infrastructure.
- Maximum PoE Cable Run: Each camera connects to the DS-7608NI-M2/8P over PoE with a maximum cable run of 100m per port using standard Cat5e or Cat6. Exceeding this distance requires a PoE extender or midspan switch to maintain signal and power integrity.
- PoE Power Budget: The DS-7608NI-M2/8P provides PoE power across all 8 ports. Confirm the total PoE budget against the per-camera power draw of the DS-2CD2367G3-LIS2UY/SL, particularly if you plan to add cameras to the 2 remaining ports later, to ensure the NVR’s PoE budget is not exceeded.
- Wiring Tips: Run a single Cat5e or Cat6 cable from each camera position back to the NVR location – no separate power cable is required as the cameras draw power over the same Ethernet cable via PoE. Use weatherproof conduit or appropriate IP-rated cable entry fittings where cables pass through exterior walls to prevent moisture ingress at penetration points.
Product Video Samples
Additional Information
Hikvision Warranty
3-Year Manufacturer Warranty
All Hikvision IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty and authorised dealer partner support.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit www.securitywholesalers.com.au/terms-and-conditions
Official Hikvision Partner for 2026
Authorised Hikvision Dealer Partner for 2026
As a Trusted Hikvision Dealer Partner and Hikvision Authorised Store, SecurityWholesalers.com.au is more than just a reseller — we’re a nationally recognised partner delivering genuine Hikvision solutions, backed by expert technical support and deep industry knowledge.
Our team supports systems across all major sectors — including residential homes, commercial businesses, schools, government infrastructure, warehouses, and local councils. When you choose us, you’re selecting a Hikvision-certified partner with a proven track record in performance, reliability, and customer satisfaction.
- Official Hikvision Product Support
Get access to genuine Hikvision technical resources and support, delivered by trained professionals who work with these systems daily.
- Comprehensive System Assistance
From product selection to setup, configuration, remote access support, and firmware upgrades — we offer step-by-step guidance to ensure your system is optimal.
- Reliable After-Sales Service
We provide continued support for configuration, troubleshooting, and warranty claims. Whether you’re a first-time user or a seasoned installer, we ensure your Hikvision system operates flawlessly.
- Genuine Products & Fast Dispatch
All Hikvision stock is sourced from authorised Australian distributors and shipped promptly from our local warehouse. No delays, no grey-market risks, no international return hassles.
- Industry-Wide Trust
Our clients range from councils and schools to enterprise businesses and security professionals — all trusting us for exceptional service, product reliability, and expert advice.
- Real-World Security Expertise
Unlike generic electronics stores, we specialise in security. Our team includes qualified installers and consultants offering tailored recommendations based on real-world experience — not just inventory lists.
- 3 Years Manufacturer Warranty ensuring your security system remains reliable for years to come.
At SecurityWholesalers.com.au, we’re committed to more than just competitive pricing — we offer true partnership and protection through every stage of your Hikvision journey. We’re not your average security equipment supplier — choose the team that industry professionals trust.
