Product Overview
Combining active deterrence with full-colour night vision, the DS-2CD2367G2H-LISU/SL is a 6MP Smart Hybrid Light ColorVu turret camera suited to driveways, eaves, shopfronts, and home entry points where both monitoring quality and visible response matter. Featuring a built-in strobe light, speaker, and microphone alongside AcuSense human and vehicle classification, this model goes beyond passive recording. The Smart Hybrid Light system uses both IR and warm white LEDs to deliver coloured footage up to 40m, switching modes based on scene conditions. Equipped with 130dB True WDR and a 1/2.7″ progressive scan CMOS sensor, it maintains detail across high-contrast scenes such as lit doorways or backlit driveways. Available with a 2.8mm or 4mm fixed lens, it suits a wide range of mounting positions on eaves, soffits, or wall brackets. IP67 weather resistance makes it suitable for exposed outdoor locations across Australian conditions.
Key Capabilities
6MP ColorVu Imaging
The 1/2.7″ progressive scan CMOS sensor delivers 3072 x 2048 resolution with full-colour output in low-light scenes, providing footage that carries more detail for identifying individuals, vehicles, and activity at entry points and driveways.
Smart Hybrid Light (IR + White LED)
This camera carries both IR and warm white LEDs with a 40m night range. In standard surveillance mode it uses IR to stay discreet, then switches to white light when an event occurs, producing colour footage at the moment it matters most.
Active Deterrence: Strobe and Speaker
The built-in strobe light and speaker allow the camera to issue an audible and visual warning the moment a human or vehicle is detected. This is particularly useful for driveways, gate entries, and car parks where an immediate on-site response is needed without relying on remote monitoring.
AcuSense Human and Vehicle Classification
Deep learning-based target classification distinguishes between humans, vehicles, and other motion sources. This reduces nuisance alerts triggered by animals, foliage, or environmental movement, so notifications are focused on events that actually need attention.
130dB True WDR
With 130dB True Wide Dynamic Range, the DS-2CD2367G2H-LISU/SL handles strongly backlit scenes such as doorways with outdoor glare or vehicles entering a lit garage. Detail is retained in both the bright and shadow portions of the same frame.
Built-In Microphone
The integrated microphone records audio alongside video, capturing voices, ambient sounds, and on-site activity. This adds context to footage that a video-only recording cannot provide, supporting incident review and verification.
Best For
- Driveways and gate entries: The 40m Smart Hybrid Light range and AcuSense vehicle detection make this well suited to monitoring longer approaches where both identification and deterrence are needed.
- Residential eave and soffit mounting: The compact turret housing sits flush against the mounting surface, suits soffit and eave positions, and the IP67 rating handles direct weather exposure common in exposed outdoor locations.
- Shopfronts and small business entries: Full-colour imaging at night combined with the active strobe and speaker supports both after-hours deterrence and daytime monitoring of customer and staff movement.
- Locations needing event-triggered response: The strobe and speaker activate on detection rather than continuously, making this model appropriate where an automated on-site warning is preferred over a silent monitoring-only setup.
Why Choose the DS-2CD2367G2H-LISU/SL
What separates the DS-2CD2367G2H-LISU/SL from a standard 6MP turret camera is the combination of active deterrence hardware and Smart Hybrid Light technology in a single outdoor-rated unit. Most fixed turret cameras at this resolution record passively. This model adds a built-in strobe, speaker, and AcuSense classification, so it can respond to a detected human or vehicle with an on-site warning without requiring additional devices or integrations. The Smart Hybrid Light system preserves IR-only operation during general monitoring and only switches to white light when an event occurs, reducing light pollution while still delivering colour footage at critical moments. Minimum illumination of 0.0005 Lux with the sensor active, and 0 Lux with the white light on, supports very dark outdoor environments. Available through Security Wholesalers, this model is stocked in both 2.8mm and 4mm fixed lens variants to suit different mounting distances and coverage requirements.
Buyer Decision Tips
Lens Selection – 2.8mm vs 4mm: The 2.8mm lens gives a horizontal field of view of 112.1 degrees, which suits wide coverage of a driveway apron, yard, or shopfront facade at close to medium range. The 4mm lens narrows to 92.7 degrees horizontal and is better suited to monitoring a defined entry point such as a gate, door, or vehicle access lane where more reach and tighter framing are needed. If the camera will be mounted on a low eave directly above an area, 2.8mm is the more practical choice. If it is mounted further back with a longer sight line, 4mm will give better subject detail.
Active Deterrence Placement: The strobe and speaker are most effective when the camera is mounted at a height and angle where the strobe flash is visible to someone approaching and the speaker audio carries clearly. For driveways, a mounting height of 2.5m to 3.5m on the eave or wall facing the approach direction gives the best combination of detection angle, strobe visibility, and audio projection. Mounting too high or pointing downward steeply will reduce the deterrent effect of both the strobe and speaker output.
Key Features & Technical Specifications
| Image Sensor |
1/2.7″ Progressive Scan CMOS |
| Resolution |
6MP (3072 x 2048) |
| Max Frame Rate |
3200 x 1800 @ 20fps |
| Lens Options |
2.8mm fixed or 4.0mm fixed |
| Field of View (2.8mm) |
Horizontal: 112.1°, Vertical: 59.4°, Diagonal: 135.5° |
| Field of View (4.0mm) |
Horizontal: 92.7°, Vertical: 49.7° |
| DORI Distance (2.8mm) |
Detect: 89m, Recognise: 17m, Identify: 8m |
| Minimum Illumination |
0.0005 Lux @ F1.0 AGC ON; 0 Lux with white light on |
| Night Vision |
Smart Hybrid Light (IR + white LED), up to 40m |
| WDR |
130dB True WDR |
| Shutter Speed |
1/3s to 1/100,000s |
| Video Compression |
H.265+, H.264 |
| Audio |
Built-in microphone |
| Active Deterrence |
Built-in strobe light and speaker |
| Target Classification |
AcuSense human and vehicle detection |
| Ingress Protection |
IP67 |
| Housing Type |
Turret |
Ideal Use Cases
Residential Driveways
The 40m Smart Hybrid Light range and AcuSense vehicle classification allow the DS-2CD2367G2H-LISU/SL to detect and classify approaching vehicles early, triggering the strobe and speaker before a visitor or intruder reaches the home.
Eave and Soffit Mounting
The turret form factor sits flush to the mounting surface, making it practical for eave and soffit positions without protruding hardware. The IP67 rating handles rain exposure typical of overhanging but open eave locations.
Retail Shopfronts
Full-colour imaging after dark and the active strobe mean this camera supports both evidence capture and deterrence at shopfront entries, without requiring a separate deterrent device alongside the camera.
Gate and Pedestrian Entry Points
Mounted at a gate post or wall beside an entry, the 4mm lens option gives a tighter field of view focused on the access point. The built-in microphone records audio at the entry alongside video, supporting incident review.
Small Commercial Car Parks
AcuSense vehicle detection limits alerts to actual vehicle movement rather than general motion, making the camera practical for small car parks where incidental motion from lighting or weather would otherwise generate excessive notifications.
Choosing the Right Model
- Choose this model if: You need a single outdoor turret camera that combines 6MP colour night imaging, AcuSense classification, and active on-site deterrence via strobe and speaker, particularly for driveways, home entries, or shopfronts where an automated warning response is part of the brief.
- Choose a different model if: You need a varifocal or motorised zoom lens to cover a long approach or to adjust framing after installation without repositioning the camera. This model uses a fixed lens and is not suited to situations where the coverage distance or angle needs to be dialled in remotely or adjusted post-install. A motorised varifocal turret would be more appropriate in that case.
- Choose a different model if: The installation site requires a higher resolution for licence plate capture at distance or facial identification at longer ranges than the confirmed DORI distances for this model support. A higher resolution camera with a longer focal length would be more appropriate for that application.
FAQs
- What triggers the strobe and speaker on the DS-2CD2367G2H-LISU/SL?
The strobe and speaker are triggered by the AcuSense detection engine when a human or vehicle is classified in the monitored zone. Because the system uses deep learning to separate people and vehicles from general motion, the active deterrence response is tied to relevant targets rather than every motion event such as wind-blown foliage or passing animals.
- Does this camera record audio continuously or only when triggered?
The built-in microphone records audio alongside video and operates according to the recording schedule configured on the connected NVR or VMS. Audio recording mode depends on system configuration. Note that this model has a built-in microphone only. It does not have a built-in speaker for voice output from the control room side, so real-time voice communication from a monitoring station is not supported by this camera alone.
- What is the difference between the 2.8mm and 4mm lens variants?
The 2.8mm lens covers a horizontal field of view of 112.1 degrees, suited to wide-area coverage of a driveway, yard, or facade at close range. The 4mm lens narrows to 92.7 degrees horizontal and gives slightly more reach and subject detail at a defined entry point. Both are fixed focal length lenses and cannot be adjusted after installation.
- Does the Smart Hybrid Light always use white light at night?
No. In its default smart mode, the camera uses IR illumination for general night monitoring and only activates the warm white LEDs when an event is detected by the AcuSense engine. This means white light is used selectively rather than constantly, which reduces light pollution and preserves the night-vision benefit of IR for continuous monitoring while still delivering colour footage at the moment of an event.
- Is this camera suitable for mounting under an exposed eave facing the weather?
Yes. The IP67 ingress protection rating confirms the camera is protected against dust ingress and against water jets from any direction, making it suitable for exposed eave, soffit, and wall mounting in outdoor environments including those subject to rain and humidity typical of Australian conditions.
- What NVR or recorder is compatible with the DS-2CD2367G2H-LISU/SL?
This camera is a Hikvision IP network camera and connects to any Hikvision PoE NVR that supports H.265 compression and is compatible with Hikvision AcuSense cameras. To take full advantage of the human and vehicle classification and active deterrence triggering, the connected NVR should support AcuSense event handling. Check your NVR’s compatibility list or firmware version before connecting. Security Wholesalers can assist with confirming NVR compatibility for this model.
- What mounting accessories are available for this camera?
Hikvision produces a range of junction boxes and wall mount brackets compatible with this turret camera, including the DS-1280ZJ-DM21 junction box and the DS-1273ZJ-140 bracket for G Series turret cameras. A pendant mount bracket is also available for pole or overhang installations. Compatible accessories are listed in the product table on this page.
Product Video Samples
Additional Information
Add Options
Hikvision Warranty
3-Year Manufacturer Warranty
All Hikvision IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty and authorised dealer partner support.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit www.securitywholesalers.com.au/terms-and-conditions
Free Express Shipping*
Shipping & Delivery
At SecurityWholesalers.com.au, we prioritise fast and reliable delivery across Australia. Whether you’re ordering for home or business, you can expect professional service, tracked shipments, and speedy fulfilment — every time.
✔ FREE Shipping Australia-Wide on Orders Over $100
Enjoy free express shipping on all orders over $100. For orders under $100, a flat rate of $20.00 applies. We proudly offer nationwide delivery using trusted courier partners for your peace of mind.
✔ Same-Day Despatch for Fast Delivery
Place your order before 10am (Sydney time) on any business day and we’ll do our best to despatch it the same day, subject to stock availability. We receive new stock into our warehouse every second day, so we always strive to ship the freshest arrivals directly to you. Most orders are received within 1-3 business days via the Express Post network, covering Australian capital cities and major metro areas. Deliveries to regional locations typically take 2–5 business days.
For urgent orders, please contact our customer care team to expedite the delivery and ensure that we can get your equipment to your project site on time.
✔ Reliable Couriers You Can Trust
We primarily use StarTrack Express for fast, secure shipping. Depending on warehouse availability, we may also use Toll or Couriers Please — whichever gets your order to you fastest.
✔ Order Processing & Tracking
Orders are processed Monday to Friday (excluding public holidays) and shipped within 24 hours. Tracking numbers are emailed to you by 11pm on the day your order ships. You can monitor your delivery through:
✔ Missed a Delivery?
If you’re not home at the time of delivery, your parcel will be left in a secure location if considered safe. If not, a collection card will be left and the parcel will be held at the nearest depot or post office for pickup.
✔ Need Help?
If you haven’t received your order within 4 business days, please contact us with your full name and order number. We’ll follow up promptly. Also, be sure to check your email spam folder for shipping notifications or attempted delivery messages.
Trade Discounts Available
Want even more savings? Register instantly for a Trade Account and, once approved, you’ll gain access to exclusive discounts on a wide range of products. It’s our way of supporting installers, resellers, and industry professionals with better pricing and priority service.
