Product Overview
Wide-area surveillance across open precincts, logistics yards, and critical infrastructure sites presents a fundamental challenge: a single fixed camera cannot deliver both full-scene context and close-up identification at the same time. The Hikvision DS-2SE7C432MWG-EB/26 solves this with TandemVu dual-channel architecture, combining a stitched 6MP 180-degree panoramic module and a 4MP PTZ channel with 32x optical zoom in a single outdoor unit. Featuring AcuSense human and vehicle classification, intelligent channel linkage that directs the PTZ toward detected panoramic events, 200m IR range, and active deterrence via built-in strobe and audio warnings, this camera is designed for high-demand environments where broad coverage and precise identification must operate simultaneously. The panoramic channel includes 30m white light and achieves 0.0005 Lux minimum illumination, while the PTZ sensor reaches 0.005 Lux. Note that a 24 VAC power supply is included, but a Hi-PoE injector is not included and must be sourced separately if required.
Key Capabilities
TandemVu Dual-Channel Architecture
The DS-2SE7C432MWG-EB/26 runs a 6MP 180-degree panoramic channel and a 4MP PTZ channel simultaneously. Operators gain continuous full-scene context from the panoramic view while the PTZ independently tracks and zooms into specific subjects, eliminating the blind-spot trade-off common with single-sensor cameras covering large outdoor areas.
32x Optical Zoom with Smart Auto-Tracking
With a 32x optical zoom range spanning from 60.2-degree wide to 2.3-degree telephoto, the PTZ channel can identify subjects at significant distances across large sites. Smart auto-tracking locks onto a detected target and follows it automatically, maintaining framing without operator intervention during dynamic events.
Intelligent Channel Linkage
When the panoramic channel detects an event through AcuSense, it can automatically cue the PTZ to the relevant scene area for immediate close-up investigation. This linkage reduces response time and removes the need for operators to manually direct the PTZ, making the system more effective for unmanned or after-hours monitoring.
AcuSense Human and Vehicle Classification
AcuSense filters detections by human and vehicle targets, helping reduce alerts triggered by irrelevant movement such as animals or foliage. Combined with smart face capture, this gives operators more actionable notifications and supports post-event review with more relevant recorded footage across complex sites.
200m IR and 30m Panoramic White Light
The PTZ channel reaches 200m IR illumination for long-range night identification, while the panoramic channel includes 30m white light for broader scene illumination. The panoramic sensor achieves 0.0005 Lux minimum illumination, providing usable imagery in near-total darkness across open outdoor environments.
Active Deterrence with Strobe and Audio Warning
Built-in strobe lighting and audio warning capability allow the camera to respond to detected intrusions with visible and audible alerts. This active deterrence function can be triggered automatically on detection events, providing a behavioural intervention without requiring a separate deterrence device at the installation point.
Best For
- Large Open-Area Monitoring: The 180-degree panoramic channel provides continuous scene coverage while the PTZ channel zooms into events, making this suited to car parks, public squares, and open commercial precincts where a single fixed camera could never cover the required field of view.
- Logistics and Transport Yards: Long-range 32x optical zoom combined with auto-tracking and AcuSense vehicle classification supports monitoring of vehicle entries, loading dock activity, and yard movement without the coverage gaps that a fixed camera array would produce.
- Perimeter and Critical Infrastructure: IP66-rated construction, 200m IR, and active deterrence make this unit appropriate for unmanned perimeter lines, utilities sites, and industrial facilities where after-hours intruder response is required.
- High-Security Sites Requiring Subject Identification: Smart face capture and 32x optical zoom support post-event identification at distances not achievable with standard fixed cameras, which is relevant for access-controlled facilities and high-value asset areas.
- Sites Replacing Multiple Fixed Cameras: The dual-channel design allows a single mounting point to deliver both panoramic context and detailed PTZ coverage, reducing cabling, installation points, and ongoing maintenance compared to a multi-camera layout covering the same area.
Why Choose the DS-2SE7C432MWG-EB/26
The DS-2SE7C432MWG-EB/26 occupies a distinct position in the Hikvision PTZ range because of its TandemVu dual-channel design. A standard PTZ camera can zoom in for detail or pull back for context, but not both at once. The DS-2SE7C432MWG-EB/26 runs a 6MP 180-degree panoramic view and a 4MP PTZ view simultaneously, with intelligent linkage between them. Adding AcuSense classification, smart face capture, 200m IR, 30m white light, and active deterrence means this is not simply a zoom camera but a complete wide-area response platform. A simpler PTZ without panoramic integration would require additional fixed cameras to achieve the same situational coverage. Available at Security Wholesalers, this model is supplied with a 24 VAC power supply and supports Hi-PoE input up to 60W, giving installers flexibility in how power is delivered to the unit.
Buyer Decision Tips
Power Supply Planning: The DS-2SE7C432MWG-EB/26 draws up to 60W and ships with a 24 VAC power supply. If your installation requires Hi-PoE delivery via a network switch or injector, note that a Hi-PoE injector is not included in the box and must be purchased separately. Standard 802.3af/at PoE switches will not provide sufficient power for this camera, so confirm your power delivery method before installation.
Panoramic Coverage vs. PTZ Zoom Trade-off: The panoramic channel provides a stitched 180-degree view at 6MP but does not zoom. The PTZ channel provides 32x optical zoom but covers a narrower field at any given zoom level. Both run simultaneously, so the correct deployment approach is to rely on the panoramic for scene context and configure the PTZ to respond to panoramic-triggered events. Sites needing full 360-degree ground-level coverage should evaluate whether a single unit placement will capture all required angles or whether additional fixed cameras are needed for blind corners.
Key Features & Technical Specifications
| Panoramic Channel Sensor |
1/2.5″ Progressive Scan CMOS |
| PTZ Channel Sensor |
1/2.8″ Progressive Scan CMOS |
| Panoramic Resolution |
3632 x 1632 (6MP) |
| PTZ Resolution |
2560 x 1440 (4MP) |
| Optical Zoom |
32x optical, 16x digital |
| Panoramic Field of View |
180-degree stitched panoramic |
| PTZ Horizontal FOV |
60.2-degree (wide) to 2.3-degree (telephoto) |
| Minimum Illumination – Panoramic |
0.0005 Lux |
| Minimum Illumination – PTZ |
0.005 Lux |
| IR Range |
200m (PTZ channel) |
| White Light Range |
30m (panoramic channel) |
| WDR |
Panoramic: Digital WDR; PTZ: 120 dB |
| Pan Range and Speed |
360-degree continuous; 0.1 to 160-degree/s |
| Tilt Range and Speed |
-15-degree to 90-degree; 0.1 to 120-degree/s |
| Smart Detection |
AcuSense human and vehicle classification, smart face capture, line crossing, intrusion, region entrance/exit, audio exception |
| Active Deterrence |
Built-in strobe and audio warning |
| On-Board Storage |
MicroSD up to 256 GB |
| Protection Rating |
IP66 |
| Power Supply |
24 VAC (included) / Hi-PoE; Max. 60W |
Ideal Use Cases
Transport and Logistics Yards
AcuSense vehicle classification and 32x optical zoom allow operators to track vehicle movements, monitor loading dock activity, and verify licence plate areas at distance from a single mounted unit, reducing the number of cameras needed across a large yard.
Open Commercial Car Parks
The 180-degree panoramic channel provides continuous coverage of a wide bay area, while the PTZ can zoom into incidents as they occur. Intelligent channel linkage means the PTZ responds to panoramic-detected events automatically, supporting after-hours monitoring without constant operator attention.
Industrial and Utilities Perimeters
IP66 housing, 200m IR, and active deterrence via built-in strobe and audio warning make this unit suited to unmanned perimeter lines at industrial plants and utilities infrastructure, where intruder detection and a visible response need to occur without an on-site guard.
Public Open Spaces and Precincts
The stitched 6MP panoramic view captures broad pedestrian movement context, while smart face capture and 32x PTZ zoom support identification of individuals during incidents. This combination is relevant for town centres, event precincts, and high-footfall public areas.
Critical Infrastructure and Secure Facilities
Line crossing, intrusion detection, and region entrance/exit analytics combined with intelligent PTZ linkage allow this camera to form a core component of a perimeter detection system at data centres, government facilities, and other restricted-access sites requiring layered monitoring.
Construction Sites and Temporary Compounds
The combination of wide panoramic coverage, long IR range, and active deterrence allows a single camera position to monitor a large construction compound perimeter. On-board MicroSD storage up to 256 GB provides local recording continuity where network infrastructure may be limited or intermittent.
Choosing the Right Model
- Choose this model if: Your site requires simultaneous wide-area panoramic coverage and long-range PTZ zoom from a single mounting point, particularly where AcuSense-triggered auto-tracking and active deterrence are part of the installation brief.
- Choose a different model if: You need full 360-degree ground-level coverage from a single unit. The panoramic channel covers 180 degrees, so a fisheye or multi-sensor panoramic camera would be more appropriate where complete surround coverage from one mounting point is required.
- Choose a different model if: Your power infrastructure cannot support Hi-PoE (60W) and running a 24 VAC cable to the mounting location is not feasible. Standard PoE switches are insufficient for this camera, so confirm your power delivery method before committing to this model.
- Choose a different model if: The installation is indoors or in a low-ceiling environment. The DS-2SE7C432MWG-EB/26 is an outdoor-rated PTZ designed for elevated mounting over large open areas and is not suited to indoor ceiling or corridor applications.
FAQs
- Does the panoramic channel and the PTZ channel record simultaneously?
Yes. The TandemVu design runs both the 6MP panoramic channel and the 4MP PTZ channel as independent streams at the same time. This means your NVR or VMS receives two separate video feeds from the one camera unit, and both channels record continuously regardless of where the PTZ is currently pointing.
- How does intelligent linkage between the panoramic and PTZ channels work?
When the panoramic channel detects an AcuSense event such as a human intrusion or vehicle crossing a defined line, it can automatically trigger the PTZ channel to slew toward the relevant area and zoom in. This removes the need for an operator to manually redirect the PTZ during an event, which is particularly valuable for after-hours or unattended monitoring scenarios.
- What power supply does the DS-2SE7C432MWG-EB/26 require, and what is included?
The camera requires either 24 VAC or Hi-PoE power at a maximum draw of 60W. A 24 VAC power supply is included in the box. If you intend to power the camera via a network cable using Hi-PoE, you will need to source a compatible Hi-PoE injector separately, as it is not included. Standard 802.3af or 802.3at PoE switches will not provide enough power for this unit.
- What is the effective IR range and does the white light cover both channels?
The PTZ channel provides up to 200m of IR illumination for long-range night visibility. The white light, rated at 30m, is associated with the panoramic channel and provides broader scene illumination for the wide-view feed. The panoramic sensor achieves a minimum illumination of 0.0005 Lux, while the PTZ sensor reaches 0.005 Lux, both supporting usable imagery in very low-light conditions.
- Is the active deterrence function automated or does it require manual triggering?
The built-in strobe and audio warning can be configured to trigger automatically when AcuSense or smart detection events occur, such as intrusion detection or line crossing. This means the camera can initiate a deterrence response without an operator being present to manually activate it, which is useful for after-hours monitoring of yards, perimeters, and access points.
- How much local storage can the camera support, and does it need an NVR?
The DS-2SE7C432MWG-EB/26 accepts a MicroSD card up to 256 GB for on-board recording. This provides local storage continuity in the event of network interruption. For full dual-channel recording, event management, and remote access, connection to a compatible Hikvision NVR or VMS is recommended. Available through Security Wholesalers, this camera is compatible with Hikvision NVRs that support dual-channel IP devices.
- What smart detection analytics are available on this camera?
The DS-2SE7C432MWG-EB/26 supports AcuSense human and vehicle classification, smart face capture, line crossing detection, intrusion detection, region entrance and exit alerts, and audio exception monitoring. These analytics operate across the camera’s channels and can be used to trigger PTZ linkage, active deterrence responses, or notifications to a connected NVR or VMS platform.
Product Video Samples
Additional Information
Hikvision Warranty
3-Year Manufacturer Warranty
All Hikvision IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty and authorised dealer partner support.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit www.securitywholesalers.com.au/terms-and-conditions
Official Hikvision Partner for 2026
Authorised Hikvision Dealer Partner for 2026
As a Trusted Hikvision Dealer Partner and Hikvision Authorised Store, SecurityWholesalers.com.au is more than just a reseller — we’re a nationally recognised partner delivering genuine Hikvision solutions, backed by expert technical support and deep industry knowledge.
Our team supports systems across all major sectors — including residential homes, commercial businesses, schools, government infrastructure, warehouses, and local councils. When you choose us, you’re selecting a Hikvision-certified partner with a proven track record in performance, reliability, and customer satisfaction.
- Official Hikvision Product Support
Get access to genuine Hikvision technical resources and support, delivered by trained professionals who work with these systems daily.
- Comprehensive System Assistance
From product selection to setup, configuration, remote access support, and firmware upgrades — we offer step-by-step guidance to ensure your system is optimal.
- Reliable After-Sales Service
We provide continued support for configuration, troubleshooting, and warranty claims. Whether you’re a first-time user or a seasoned installer, we ensure your Hikvision system operates flawlessly.
- Genuine Products & Fast Dispatch
All Hikvision stock is sourced from authorised Australian distributors and shipped promptly from our local warehouse. No delays, no grey-market risks, no international return hassles.
- Industry-Wide Trust
Our clients range from councils and schools to enterprise businesses and security professionals — all trusting us for exceptional service, product reliability, and expert advice.
- Real-World Security Expertise
Unlike generic electronics stores, we specialise in security. Our team includes qualified installers and consultants offering tailored recommendations based on real-world experience — not just inventory lists.
- 3 Years Manufacturer Warranty ensuring your security system remains reliable for years to come.
At SecurityWholesalers.com.au, we’re committed to more than just competitive pricing — we offer true partnership and protection through every stage of your Hikvision journey. We’re not your average security equipment supplier — choose the team that industry professionals trust.
