The HiLook HA-IN-IP2 is a 7-inch capacitive-touch IP intercom indoor monitor featuring both PoE and 12 V DC power options, WiFi (2.4GHz) and RJ-45 Ethernet connectivity, and support for up to 128 GB TF card storage — ideal for modern residential or small commercial intercom setups.
WIRING REQUIREMENTS;
> ethernet cable from Door Station to Poe Switch
> ethernet cable from the monitor to Poe Switch
> ethernet cable Poe Switch to the modem (if you wish to set up remote communication)
The HiLook HA-IN-IP2 indoor station brings intuitive and flexible intercom monitoring to your home or business entry system. With a vibrant 7-inch capacitive touch-screen (resolution 1024 × 600), it offers a user-friendly interface for viewing visitors, communicating via two-way audio, and managing door access.
Connectivity is versatile: the unit supports wired network via RJ-45 (10/100 Mbps) and wireless network via WiFi (802.11b/g/n, 2.4GHz). It also supports Power-over-Ethernet (IEEE 802.3af) as well as 12 V DC supply, making installation flexible in both retrofit and new-build scenarios. Storage is built-in via TF card slot (supporting up to 128 GB), enabling snapshots or recordings of intercom activity.
Designed for real-world environments, the HA-IN-IP2 supports both wall and surface mounting with a slim profile (approx. 175 mm × 113.5 mm × 21 mm). It integrates neatly with HiLook’s video intercom ecosystem (door stations, door locks, mobile app notifications) and is well suited to single dwellings, small apartment entries, boutique offices or retail frontages where a simple but capable monitoring station is required.
Residential or small-commercial indoor monitor station
Installation
Slim surface-mount design
Installer Tips
Mount the monitor at a convenient height for users (typically 140-160 cm from floor), ensuring network cable and/or power is accessible.
If using PoE, ensure your switch or injector supports IEEE 802.3af and that cable length is within spec for stable power/data.
If using WiFi, ensure the unit is within strong signal range of your router/access point and avoid thick walls or sources of interference (metal, HVAC).
Format the TF card in the device after installation to ensure compatibility and mark it for maintenance (e.g., annual check).
Configure remote ringing and app integration (if supported) in setup — ensure mobile notifications are working, door-station link is verified.
Label the monitor’s network port, power feed and wall-plate for future maintenance or tenancy turnover.
Confirm firmware is current and ensure system time is synced (important for recorded events and snapshots).
For multi-tenant or shared spaces, plan user accounts and permissions carefully (if supported by system).
Clean the touch screen periodically and avoid installing it under bright direct lighting that may reduce visibility.
Keep a backup of the licence key/user credentials of your intercom system for warranty/service needs.
Frequently Asked Questions (FAQs)
Q: What does the HA-IN-IP2 monitor support in terms of network connectivity? A: It supports both wired Ethernet (10/100 Mbps) and WiFi 2.4GHz (802.11b/g/n) for flexible install options.
Q: Can it be powered via PoE? A: Yes. It supports Power-over-Ethernet (IEEE 802.3af) as well as a 12 V DC power supply.
Q: Does it support recording or storage? A: Yes. The monitor has a TF (microSD) card slot with support for up to 128 GB for snapshots or intercom event recording.
Q: Is it suitable for multi-tenant buildings? A: Yes — while basic in scope, it is suitable for small apartment entries, boutique offices or shared spaces. For larger multi-tenant systems, check with your integrator for compatibility and user-management features.
Q: What is the display resolution? A: The screen is 7-inch capacitive touch with 1024 × 600 pixel resolution.
Q: How thick is the unit and what’s the design like? A: It has a slim profile with approximate dimensions of 175 mm height × 113.5 mm width × 21 mm depth, finished in white for clean interior aesthetics.
Q: Does this monitor include a door station? A: No. This is only the indoor station monitor. It requires a compatible door station or intercom system to be installed separately.
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back
Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
