Product Overview
Combining active deterrence with full-colour night vision and 8MP 4K resolution, this Hikvision ColorVu 3.0 Hybrid kit bundles 4 x DS-2CD2387G3-LIS2UY/SL turret cameras with the DS-7604NI-M1-4P 4-channel PoE NVR into a ready-to-deploy outdoor surveillance system. Each turret camera features ColorVu 3.0 technology with an F1.0 super-aperture lens, Smart Hybrid Light switching between IR and warm white light up to 40m, AcuSense human and vehicle detection, a built-in arrayed dual microphone, Smart PA speaker and a strobe light for real-time audio-visual warnings. The 4CH NVR supports GUI 4.0 with 4K HDMI output and 2 HDD bays, and powers all 4 cameras over a single Cat6 run via built-in PoE ports. This kit is supplied with NO HDD pre-installed, allowing storage capacity to be sized to the site. Lens options of 2.8mm or 4mm are available at checkout, and custom lens selections can be noted in the order comments.
Key Capabilities
ColorVu 3.0 with F1.0 Super-Aperture
The F1.0 lens gathers significantly more light than standard apertures, enabling each camera to produce full-colour images in near-darkness without relying solely on supplemental lighting. AI 3D LUT colour correction and HikAI-ISP noise reduction keep night footage sharp and true-to-life.
Smart Hybrid Light (IR + White Light)
Each camera automatically selects between IR, warm white light or smart hybrid mode based on environmental conditions and detected motion. The 40m illumination range suits driveways, side passages and building entry points where lighting is inconsistent.
AcuSense Human and Vehicle Detection
Deep-learning classification filters out animals, foliage and weather conditions, generating alerts only for confirmed human or vehicle movement. This keeps notifications actionable and improves the efficiency of recorded footage review.
Active Deterrence: Strobe, Speaker and Two-Way Audio
Each camera carries a built-in strobe light, Smart PA speaker and arrayed dual microphone supporting two-way audio and pre-programmed voice warnings. This allows live verbal communication or automated deterrent responses the moment a human or vehicle trigger is detected.
4CH PoE NVR with 4K Output and Dual HDD Bays
The DS-7604NI-M1-4P powers and records all 4 cameras over standard Cat6 cabling, eliminating the need for separate power supplies. GUI 4.0 provides an intuitive interface, 4K HDMI output supports a high-resolution monitor, and 2 HDD bays allow flexible storage scaling without replacing the unit.
H.265+ Compression Across All 4 Cameras
H.265+ smart encoding reduces bandwidth and storage consumption by up to 70% compared to H.264, which is significant when recording 8MP streams from 4 cameras continuously. This directly affects how long footage can be retained before the drive fills and overwrites.
Best For
- Residential Properties Requiring Active Deterrence: The combined strobe, speaker and two-way audio on each turret camera allows homeowners or monitoring services to issue warnings in real time when a human trigger is detected at a driveway, gate or entry.
- Small Commercial Sites with 4 or Fewer Entry Points: Shopfronts, warehouses and small office buildings with a main entry, rear access, carpark and side gate can be fully covered by the 4-camera configuration without expansion hardware.
- Sites with Inconsistent or No Existing Lighting: Smart Hybrid Light switches between IR and white light modes automatically, making the cameras well suited to unlit driveways, dark rear alleys or carparks where permanent lighting is unavailable.
- Installations Requiring Clean Single-Cable Runs: Built-in PoE on the NVR means each camera needs only a single Cat6 cable from the NVR location, simplifying installation in new builds or retrofit scenarios where running dual cables is impractical.
- Operators Who Want to Select Their Own Storage: Because the NVR ships with no HDD, buyers can fit a WD Purple or Seagate Skyhawk drive of their preferred capacity, rather than paying for a pre-installed drive that may not match their retention requirements.
Why Choose the DS-2CD2387G3-LIS2UY/SL + DS-7604NI-M1-4P Kit
This kit goes beyond a standard 8MP outdoor package by pairing ColorVu 3.0 full-colour night vision with confirmed active deterrence hardware in every camera. A basic outdoor kit records what happens. The DS-2CD2387G3-LIS2UY/SL cameras respond to it: the strobe flashes, the Smart PA speaker broadcasts a warning and two-way audio lets an operator or Hik-Connect user speak directly to whoever triggered the camera. AcuSense classification means those responses are triggered only by humans or vehicles, not passing animals or windblown trees. The DS-7604NI-M1-4P NVR ties it together with PoE power delivery, 4K playback output and dual HDD bays for storage flexibility. Available through Security Wholesalers, this kit is pre-validated as a compatible system so there is no guesswork around camera-to-NVR pairing or PoE power budgets.
Package Inclusions
Buyer Decision Tips
HDD Sizing for 4 x 8MP Streams: Recording 4 cameras at 8MP with H.265+ continuously, a 4TB surveillance drive typically provides 7 to 10 days of retention depending on motion frequency and scene complexity. If your site requires 14 to 30 days of footage history, fit a 6TB or 8TB drive. The DS-7604NI-M1-4P supports 2 HDD bays, so a second drive can be added later without replacing the NVR. Use a WD Purple or Seagate Skyhawk drive rated for continuous write workloads.
Lens Selection at Checkout: The 2.8mm lens covers a wider field of view suited to entry points, hallways and tight spaces where the camera is mounted close to the target area. The 4mm lens provides a narrower, more directed view better suited to longer driveways, carparks or gate approaches where greater recognition distance is needed. DORI recognition distance increases from 17m at 2.8mm to 21m at 4mm. If you need different focal lengths across the 4 cameras, note your preferences in the order comments and the team will ship the correct mix.
Key Features & Technical Specifications
| Kit Configuration |
4 x turret cameras + 1 x 4CH PoE NVR |
| Camera Model |
Hikvision DS-2CD2387G3-LIS2UY/SL |
| NVR Model |
Hikvision DS-7604NI-M1-4P |
| Resolution |
8MP (4K) per camera |
| Lens Aperture |
F1.0 super-aperture |
| Available Lens Options |
2.8mm, 4mm (select at checkout) |
| Night Vision Technology |
ColorVu 3.0 full-colour, Smart Hybrid Light |
| Illumination Range |
40m IR / 40m warm white light |
| AI Detection |
AcuSense human and vehicle classification |
| Active Deterrence |
Built-in strobe light, Smart PA speaker |
| Audio |
Arrayed dual microphone, built-in speaker, audio I/O, two-way audio |
| Weather Rating |
IP67 (cameras) |
| Camera Power |
PoE (IEEE 802.3af/at) / 12V DC |
| Video Compression |
H.265+ |
| NVR Channels |
4 channels with built-in PoE ports |
| NVR Output |
4K HDMI |
| NVR HDD Bays |
2 bays (no HDD pre-installed) |
| NVR Interface |
GUI 4.0 |
| DORI – 2.8mm |
Detect 89m / Observe 35m / Recognise 17m / Identify 8m |
| DORI – 4mm |
Detect 109m / Observe 43m / Recognise 21m / Identify 10m |
Ideal Use Cases
Residential Entry Monitoring with Deterrence
A single kit covers front driveway, rear yard, side gate and garage with 4 turret cameras, each capable of issuing a strobe flash and verbal warning the moment an AcuSense-confirmed human trigger occurs at night, without manual intervention.
Retail Shopfront and Rear Access
Small retail premises can place cameras at the shopfront entrance, car park, loading bay and rear door. The 40m white light illumination ensures usable colour footage in unlit rear areas after hours, while the strobe acts as a visible deterrent against after-hours intrusion.
Construction Site After-Hours
Sites without permanent lighting benefit from Smart Hybrid Light switching to white mode on detected movement, providing full-colour footage of confirmed human or vehicle intrusions. The two-way audio enables a remote operator to speak directly to anyone on site.
Body Corporate and Strata Entry Points
Common property with 4 or fewer access points such as pedestrian gates, vehicle entries, letterbox areas and bin enclosures can be covered by this kit. The IP67 rating and turret housing suit both covered and exposed mounting locations across varied building facades.
Small Warehouse or Storage Facility
Coverage of a roller door, pedestrian access, yard perimeter and interior loading area gives a small warehouse operator full visibility with a single NVR. H.265+ compression across all 4 x 8MP streams keeps storage consumption manageable on a single surveillance-grade HDD.
Choosing the Right Model
- Choose this kit if: You need active deterrence built into every camera, want full-colour night vision without relying on permanent external lighting, and have 4 or fewer locations to monitor on a single PoE NVR with flexible HDD sizing.
- Choose a different kit if: You need more than 4 camera positions – this NVR has no expansion beyond 4 channels and cannot be extended. A kit built around an 8-channel or 16-channel NVR would be the appropriate next step.
- Choose a different kit if: Your site is strictly indoors with existing adequate lighting – the Smart Hybrid Light, strobe and IP67 rating are features optimised for outdoor use, and a cost-equivalent indoor kit without those components may represent better value for a purely indoor scenario.
- Choose a different kit if: You require confirmed optical zoom or PTZ coverage across a large open area such as a carpark exceeding 50m in depth – a motorised varifocal or PTZ camera package would provide the framing flexibility this fixed-lens kit cannot offer.
FAQs
- Does this kit come with a hard drive installed?
No. The DS-7604NI-M1-4P NVR ships with no HDD pre-installed. This is intentional so buyers can select a drive capacity that matches their specific retention requirements. Compatible drives include WD Purple and Seagate Skyhawk surveillance-rated HDDs, available separately. The NVR supports up to 2 drives simultaneously.
- Can I choose a different lens on each camera in the kit?
Yes. This kit is available with 2.8mm or 4mm lenses. If you need a mix of focal lengths across the 4 cameras, add a note in the order comments at checkout specifying which lens each camera position requires. Security Wholesalers will ship the correct configuration to you.
- How does the Smart Hybrid Light decide which mode to use?
In smart hybrid mode, each DS-2CD2387G3-LIS2UY/SL camera automatically selects IR or warm white light based on ambient light conditions and detected motion activity. IR mode preserves discreet low-light monitoring without drawing attention, while white light activates when colour detail and maximum visibility are prioritised on a confirmed trigger.
- What is the maximum cable run from the NVR to each camera?
PoE over Cat6 cabling supports a standard maximum run of 100m per camera from the NVR. If a camera position exceeds 100m, a PoE extender or a midspan PoE injector at an intermediate point would be required. All 4 cameras in this kit receive both data and power over the same cable.
- Does the two-way audio work remotely through the Hik-Connect app?
Yes. Both the built-in arrayed dual microphone and Smart PA speaker are hardware confirmed in the DS-2CD2387G3-LIS2UY/SL. When the camera and NVR are connected to Hik-Connect, two-way audio communication can be initiated remotely from a smartphone, allowing an operator or homeowner to speak to and hear anyone at the camera location in real time.
- Will the AcuSense strobe trigger on animals or moving trees?
AcuSense deep-learning classification is designed to distinguish human and vehicle shapes from other motion sources such as animals, foliage movement and weather effects. The strobe and audio deterrent can be configured to activate only on confirmed human or vehicle detection, reducing nuisance activations compared to standard motion detection triggers.
- How much storage does recording 4 x 8MP cameras continuously require?
With H.265+ compression active, continuous recording from 4 x 8MP cameras typically consumes between 350GB and 600GB per day depending on scene complexity and motion frequency. A 4TB surveillance drive provides approximately 7 to 10 days of retention. Fitting a second drive into the second HDD bay of the DS-7604NI-M1-4P effectively doubles capacity without any additional hardware investment.
Cabling Considerations
- Cable Type: Cat6 UTP or Cat6 FTP (shielded) for outdoor or conduit runs. FTP is recommended for exposed exterior cable runs or areas subject to electrical interference.
- Maximum PoE Cable Run: 100m per camera from the DS-7604NI-M1-4P PoE port. Runs exceeding 100m require a PoE extender to maintain power delivery and data integrity.
- Single Cable Per Camera: Each DS-2CD2387G3-LIS2UY/SL camera receives both power (via PoE) and data over the same Cat6 run. No separate power supply or additional cabling is required per camera.
- Wiring Tips: Terminate cables with RJ45 connectors rated for outdoor or direct burial use if any portion of the run is exposed. Use weatherproof RJ45 coupler boots at the camera end to protect the connection point from moisture ingress, particularly on IP67-rated cameras mounted in exposed outdoor positions.
Product Video Samples
Additional Information
Product SKU: DS-2CD2387G3-LIS2UY/SL + DS-7604NI-M1 – NO HDD
Hard Drives
Hikvision Warranty
3-Year Manufacturer Warranty
All Hikvision IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty and authorised dealer partner support.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit www.securitywholesalers.com.au/terms-and-conditions
Official Hikvision Partner for 2026
Authorised Hikvision Dealer Partner for 2026
As a Trusted Hikvision Dealer Partner and Hikvision Authorised Store, SecurityWholesalers.com.au is more than just a reseller — we’re a nationally recognised partner delivering genuine Hikvision solutions, backed by expert technical support and deep industry knowledge.
Our team supports systems across all major sectors — including residential homes, commercial businesses, schools, government infrastructure, warehouses, and local councils. When you choose us, you’re selecting a Hikvision-certified partner with a proven track record in performance, reliability, and customer satisfaction.
- Official Hikvision Product Support
Get access to genuine Hikvision technical resources and support, delivered by trained professionals who work with these systems daily.
- Comprehensive System Assistance
From product selection to setup, configuration, remote access support, and firmware upgrades — we offer step-by-step guidance to ensure your system is optimal.
- Reliable After-Sales Service
We provide continued support for configuration, troubleshooting, and warranty claims. Whether you’re a first-time user or a seasoned installer, we ensure your Hikvision system operates flawlessly.
- Genuine Products & Fast Dispatch
All Hikvision stock is sourced from authorised Australian distributors and shipped promptly from our local warehouse. No delays, no grey-market risks, no international return hassles.
- Industry-Wide Trust
Our clients range from councils and schools to enterprise businesses and security professionals — all trusting us for exceptional service, product reliability, and expert advice.
- Real-World Security Expertise
Unlike generic electronics stores, we specialise in security. Our team includes qualified installers and consultants offering tailored recommendations based on real-world experience — not just inventory lists.
- 3 Years Manufacturer Warranty ensuring your security system remains reliable for years to come.
At SecurityWholesalers.com.au, we’re committed to more than just competitive pricing — we offer true partnership and protection through every stage of your Hikvision journey. We’re not your average security equipment supplier — choose the team that industry professionals trust.
Free Express Shipping*
Shipping & Delivery
At SecurityWholesalers.com.au, we prioritise fast and reliable delivery across Australia. Whether you’re ordering for home or business, you can expect professional service, tracked shipments, and speedy fulfilment — every time.
✔ FREE Shipping Australia-Wide on Orders Over $100
Enjoy free express shipping on all orders over $100. For orders under $100, a flat rate of $20.00 applies. We proudly offer nationwide delivery using trusted courier partners for your peace of mind.
✔ Same-Day Despatch for Fast Delivery
Place your order before 10am (Sydney time) on any business day and we’ll do our best to despatch it the same day, subject to stock availability. We receive new stock into our warehouse every second day, so we always strive to ship the freshest arrivals directly to you. Most orders are received within 1-3 business days via the Express Post network, covering Australian capital cities and major metro areas. Deliveries to regional locations typically take 2–5 business days.
For urgent orders, please contact our customer care team to expedite the delivery and ensure that we can get your equipment to your project site on time.
✔ Reliable Couriers You Can Trust
We primarily use StarTrack Express for fast, secure shipping. Depending on warehouse availability, we may also use Toll or Couriers Please — whichever gets your order to you fastest.
✔ Order Processing & Tracking
Orders are processed Monday to Friday (excluding public holidays) and shipped within 24 hours. Tracking numbers are emailed to you by 11pm on the day your order ships. You can monitor your delivery through:
✔ Missed a Delivery?
If you’re not home at the time of delivery, your parcel will be left in a secure location if considered safe. If not, a collection card will be left and the parcel will be held at the nearest depot or post office for pickup.
✔ Need Help?
If you haven’t received your order within 4 business days, please contact us with your full name and order number. We’ll follow up promptly. Also, be sure to check your email spam folder for shipping notifications or attempted delivery messages.
Trade Discounts Available
Want even more savings? Register instantly for a Trade Account and, once approved, you’ll gain access to exclusive discounts on a wide range of products. It’s our way of supporting installers, resellers, and industry professionals with better pricing and priority service.
