Product Overview
Covering larger homes, commercial premises and multi-entry business sites, this HiLook 10-camera AcuSense kit bundles 10 x IPC-T262H-MU turret cameras with the HiLook NVR-216MH-C-16P 16-channel PoE recorder into a single, scalable surveillance system. Each camera delivers 6MP resolution with a 2.8mm fixed lens, 30m IR night vision and 120dB Wide Dynamic Range, providing usable detail across driveways, entry points, car parks and perimeter fencing in challenging light conditions. Equipped with AcuSense deep-learning classification, the system separates human and vehicle movement from general motion, reducing event noise across 10 camera zones simultaneously. Built with H.265+ compression to keep storage requirements in check and IP67 weatherproofing for outdoor durability, this kit connects each camera directly to the NVR over a single Cat5e or Cat6 run, with 16 PoE ports handling power and data together. It is well suited to sites where running separate power cabling is impractical and where a clean, single-recorder system architecture is preferred.
Key Capabilities
AcuSense Human and Vehicle Detection
All 10 cameras use deep-learning classification to distinguish humans and vehicles from animals, foliage and other movement triggers. Across a 10-camera site, this keeps alert volume manageable and ensures recorded events are tied to meaningful activity rather than background noise.
16-Channel PoE Architecture
The NVR-216MH-C-16P provides 16 PoE ports, powering and connecting cameras over a single Cat5e or Cat6 cable per channel. With 10 cameras in use, 6 ports remain available for future expansion without requiring a separate PoE switch or additional power supplies at camera locations.
6MP Resolution with 120dB WDR
Each IPC-T262H-MU captures at 6MP, providing enough detail to identify faces and number plates at typical entry-point distances. The 120dB Wide Dynamic Range handles scenes with bright sunlight and deep shadow simultaneously, including garage entrances, shopfronts and gate lines.
30m IR Night Vision
Built-in EXIR LEDs provide up to 30m of infrared illumination per camera. This range is suited to driveways, walkways and building perimeters where subjects approach from a predictable direction, maintaining usable monochrome footage in complete darkness without additional lighting infrastructure.
H.265+ Compression Across All Channels
H.265+ encoding reduces storage consumption significantly compared to older H.264 systems. Running 10 x 6MP cameras continuously, this compression efficiency is important for managing HDD lifespan and determining the right storage size, as it can extend recording duration by up to 50% over standard H.265.
4K HDMI Output and Mobile Viewing
The NVR-216MH-C-16P outputs up to 4K resolution over HDMI, supporting a high-resolution monitor for on-site review. Mobile app access lets owners and managers check live and recorded footage remotely, making this system suitable for sites where permanent on-site monitoring is not always possible.
Best For
- Large Residential Properties: Homes with multiple entry points, long driveways and outbuildings benefit from 10 x 6MP turret cameras covering all zones from a single 16-channel NVR.
- Small to Medium Commercial Sites: Shopfronts, warehouses and office buildings needing consistent outdoor coverage across several walls or building faces, with smarter alerting via AcuSense classification.
- Sites Requiring Scalable Expansion: With 16 PoE ports and only 10 cameras in use, the system has 6 spare channels ready for additional cameras as coverage requirements grow, without replacing the recorder.
- Installers Deploying PoE Cat-Cable Runs: The plug-and-play PoE architecture eliminates separate power wiring at each camera point, streamlining installation labour across a 10-camera site.
Why Choose the HiLook IPC-T262H-MU 10-Camera AcuSense Kit
This kit brings together confirmed hardware that works from day one as a matched system. The IPC-T262H-MU cameras are purpose-built for outdoor turret mounting, with IP67 weatherproofing and a low-profile housing suited to eaves, soffits and exterior walls. The AcuSense detection engine runs at camera level, not just on the recorder, which means classification happens before footage reaches the NVR and alert triggers are more consistent. Running 10 cameras at 6MP with H.265+ compression through a single 160Mbps NVR keeps the system within bandwidth limits without sacrificing frame rate. A simpler kit with fewer megapixels or no AI classification would require manual review of far more footage to identify relevant events. Available at Security Wholesalers, this kit is sized for sites that need genuine multi-zone coverage now, with capacity already built in for future expansion.
Package Inclusions
Buyer Decision Tips
Storage Planning: Running 10 x 6MP cameras at standard frame rates with H.265+ compression, a 4TB surveillance HDD provides approximately 10 to 14 days of continuous recording depending on motion activity and quality settings. A 6TB or 8TB drive extends this meaningfully for sites where longer retention is required. The NVR-216MH-C-16P supports a single HDD bay, so choose the largest capacity drive that fits your retention requirement from the outset, as adding more drives is not possible on this recorder model.
Cable Run Planning: Each IPC-T262H-MU camera is PoE-powered and connects to the NVR over a single Cat5e or Cat6 cable. The maximum recommended PoE run from the NVR to each camera is 100 metres. For installations where cameras are spread across a larger site, plan cable routes before purchase and confirm each run stays within this distance. If any camera position exceeds 100 metres, a PoE extender or intermediate switch will be required and should be budgeted separately.
Key Features & Technical Specifications
| Kit Configuration |
10 x IPC-T262H-MU cameras + 1 x NVR-216MH-C-16P |
| Camera Resolution |
6MP (3072 x 2048) |
| Lens Type |
2.8mm fixed lens |
| IR Night Vision Range |
Up to 30m (EXIR) |
| Wide Dynamic Range |
120dB True WDR |
| AI Detection |
AcuSense human and vehicle classification |
| Audio |
Built-in microphone (audio input) |
| Video Compression |
H.265+ / H.265 / H.264+ / H.264 |
| Camera Weatherproofing |
IP67 |
| Camera Housing |
Outdoor turret (eyeball) |
| NVR Channels |
16 channels |
| NVR PoE Ports |
16 x PoE (plug and play) |
| NVR Bandwidth |
160Mbps incoming |
| NVR Video Output |
HDMI (4K) and VGA |
| NVR Storage |
1 x HDD bay (no HDD included) |
| Remote Viewing |
Mobile app supported |
Ideal Use Cases
Large Residential Properties
Homes with multiple entry points, a double garage, side gates and rear yard access typically require 8 to 12 camera positions. This kit covers all standard zones with 10 x 6MP turret cameras, delivering usable image detail at each point via the 2.8mm lens and 30m IR.
Retail and Shopfront Premises
Shops needing coverage across a main entrance, loading area, car park and staff entry benefit from AcuSense classification on all 10 channels, which keeps alert volume focused on customer and delivery activity rather than general background movement or passing traffic.
Small Warehouses and Yards
Outdoor turret cameras with IP67 weatherproofing and 30m IR are suited to wall-mounting on warehouse exteriors, roller door surrounds and yard perimeters. The PoE connection simplifies installation in locations where AC power at each camera point would be disruptive to existing infrastructure.
Strata and Apartment Complexes
Multi-unit residential sites with shared carparks, lobby entries, bin areas and lift lobbies often need 8 to 12 cameras to achieve full perimeter coverage. The 16-channel NVR handles the full kit with spare capacity for additional cameras covering internal corridors or lobby areas.
Childcare Centres and Schools
External perimeter coverage at education facilities typically requires cameras at multiple gates, car drop-off zones and building corners. AcuSense detection identifies pedestrian activity accurately in these high-foot-traffic environments, and the built-in microphone on each IPC-T262H-MU supports audio capture for incident documentation.
Choosing the Right Model
- Choose this kit if: You need 10 outdoor turret cameras with AcuSense AI detection, 6MP resolution and PoE connectivity managed from a single 16-channel recorder, with room to add up to 6 more cameras later without replacing the NVR.
- Choose a different kit if: Your site needs full-colour night vision rather than infrared, as these cameras use IR illumination only and do not include colour night imaging. A kit with full-colour or warm-light turret cameras would be more appropriate where colour detail after dark is a priority.
- Choose a different kit if: You require varifocal lenses on any camera position, for example to cover a long driveway or a car park aisle where a 2.8mm field of view would be too wide and detail at distance would be insufficient. Fixed-lens 2.8mm cameras are suited to close-to-medium range coverage.
FAQs
- Does this kit include a hard drive?
No. The NVR-216MH-C-16P has a single HDD bay but no drive is supplied with the kit. A surveillance-grade hard drive (such as WD Purple or Seagate Skyhawk) must be purchased separately. For 10 x 6MP cameras recording continuously with H.265+ compression, a 4TB drive typically covers 10 to 14 days. A 6TB or 8TB drive is recommended for longer retention requirements.
- How does AcuSense work across all 10 cameras in this kit?
AcuSense is a deep-learning classification feature built into each IPC-T262H-MU camera. Each camera analyses its own image feed and categorises motion events as human, vehicle or other. This happens at camera level before the event is sent to the NVR, so across 10 channels the system filters events consistently and keeps alert notifications tied to actual human or vehicle movement rather than general motion triggers.
- Can I add more cameras to this system later?
Yes. The NVR-216MH-C-16P has 16 PoE ports, and this kit uses 10 of them, leaving 6 ports available for additional cameras. Any HiLook or compatible PoE IP camera can be added up to the 16-channel limit without replacing the recorder. This makes the kit a practical starting point for sites that may expand coverage over time.
- What cable type is needed to connect the cameras to the NVR?
Each camera connects to the NVR using a single Cat5e or Cat6 Ethernet cable. The cable carries both data and PoE power simultaneously, so no separate power cable is required at each camera location. The maximum recommended cable length per run is 100 metres from the NVR to the camera.
- Do the IPC-T262H-MU cameras work in complete darkness?
Yes. Each camera is fitted with built-in EXIR LEDs providing up to 30m of infrared illumination. In complete darkness, the cameras automatically switch to monochrome IR mode, producing usable footage of approaching subjects at distances up to 30 metres. Colour night vision is not a feature of this model, as it uses IR rather than white-light illumination.
- Does the built-in microphone support two-way communication?
No. Each IPC-T262H-MU includes a built-in microphone for audio capture only. This allows ambient sound and voice to be recorded alongside video footage, which can be useful for incident review. There is no built-in speaker in these cameras, so two-way voice communication is not supported.
- Where can I get support for this kit and is a datasheet available?
The HiLook IPC-T262H-MU datasheet is linked in the Additional Information section below. Technical support and product queries for this kit are handled through Security Wholesalers, where the kit is sold as a matched, tested combination. For installation questions including cable planning, storage sizing and NVR configuration, the team can assist prior to purchase.
Cabling Considerations
- Cable Type: Cat5e (minimum) or Cat6 (recommended) Ethernet cable for all camera-to-NVR runs. Cat6 is preferred for longer runs and where future bandwidth headroom may be needed.
- Maximum Cable Run: 100 metres per camera from the NVR PoE port. Runs exceeding this distance will result in unreliable PoE power delivery and potential signal loss.
- PoE Considerations: All 16 PoE ports on the NVR-216MH-C-16P are plug-and-play. No separate PoE switch or power injector is required for any of the 10 cameras included in this kit. If additional cameras beyond this kit are added at a later stage, confirm the NVR’s total PoE power budget against the combined draw of all connected cameras.
- Wiring Tips: Run cables through conduit or wall cavities before securing cameras in final positions. Label each cable at both ends during installation to simplify future troubleshooting across 10 camera runs. For outdoor runs, use outdoor-rated Cat6 with a UV-stable jacket to prevent degradation from sun exposure over time.
Product Video Samples
Additional Information
Add below if required.
HiLook Warranty
3-Year Manufacturer Warranty
All HiLook IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit www.securitywholesalers.com.au/terms-and-conditions
Official HiLook Partner for 2026
As an Authorised HiLook Partner – backed by our Official Hikvision’s Partner status for 2026, SecurityWholesalers.com.au is more than just a reseller — we’re a nationally trusted provider of all Hikvision genuine security solutions backed by professional support and real-world expertise.
Our team services and supports systems across every major sector — from residential homes to small businesses, commercial operations, local councils, schools, industrial warehouses, and even critical government infrastructure. When you buy from us, you’re choosing a supplier with a proven track record in system performance, reliability, and client satisfaction.
- Authorised Hikvision Hilook Brand Support
Get access to official HiLook technical resources, with support provided by trained professionals who know the systems inside and out.
- End-to-End System Support
From selecting the right camera to full configuration, setup, remote access assistance, and firmware updates — we help you every step of the way.
- Dedicated After-Sales Service
Our job doesn’t end at checkout. We provide timely support for product configuration, troubleshooting, and warranty claims. Whether you’re a DIY homeowner or an experienced installer, we’re here to make sure your system runs flawlessly.
- Fast Dispatch & Genuine Products
All our stock is sourced from Australian-authorised distribution and shipped quickly from our local warehouse. That means no delays, no grey-market goods, and no international return headaches.
- Reputation for Excellence
We’re trusted by a wide range of industries — from councils and schools to enterprise clients and private security firms — because we consistently deliver the best in customer service, technical guidance, and product reliability.
- Tailored Advice & Industry Knowledge
Unlike general electronics retailers, we specialise in security. Our team includes real installers and consultants who understand what works in real-world environments. We offer honest, tailored advice — not just what’s in stock.
At SecurityWholesalers.com.au, we stand for more than just prices — we stand for above and beyond security partnership. Don’t settle for average, settle with SecurityWholesalers.com.au and exceptional long-term customer commitment.
