Product Overview
Small sites that need both active deterrence at a key entry point and general 6MP monitoring elsewhere will find the HiLook 2 Camera Kit a practical starting point. The kit pairs 1 x IPC-T269-MU/SL all-in-one turret camera with a 2.8mm lens, 30m IR, white spotlight, blue and red strobe lighting, two-way audio, and AcuSense human and vehicle classification, alongside 1 x IPC-T262H 6MP AcuSense turret camera for broader coverage. Both cameras connect directly to the included HiLook NVR-104MH-C-4P 4-channel PoE NVR, which supports plug-and-play connection, 4K HDMI output, and remote viewing through the HiLookVision mobile app. With 4 PoE ports and 2 channels already in use, the NVR has room to expand. No hard drive is included, so storage must be added separately before the system can record.
Key Capabilities
Active Colour Deterrence at Entry Points
The IPC-T269-MU/SL fires a white spotlight and alternating blue and red strobe lights on detection, triggering a visible response before an intrusion escalates. This is distinct from passive IR-only cameras that simply record without any on-site warning.
Two-Way Audio on the T269-MU/SL
The IPC-T269-MU/SL includes both a built-in microphone and speaker, enabling real-time voice communication through the HiLookVision app. Pre-recorded audio clips can also be configured to broadcast automatically when a detection event occurs.
AcuSense Human and Vehicle Classification
Both cameras use AcuSense technology to distinguish people and vehicles from animals, insects, and foliage movement. This reduces unwanted alert notifications and keeps event logs focused on detections that warrant attention.
Plug-and-Play PoE via the NVR-104MH-C-4P
The included HiLook NVR-104MH-C-4P provides 4 built-in PoE ports, delivering both power and data over a single Cat5e or Cat6 cable to each camera. No separate power supply or injector is needed at each camera location.
Expandable 4-Channel System
With 4 PoE channels and only 2 cameras installed, this kit leaves 2 spare ports for future expansion. Additional HiLook IP cameras can be added later without replacing the NVR, making this a sensible foundation for a growing site.
Best For
- Home Entry and Driveway Coverage: The IPC-T269-MU/SL active deterrence camera suits a front door or driveway position where a visible response on detection is more useful than passive recording alone, while the T262H handles a secondary zone like a side gate or backyard.
- Small Retail Shopfronts: A shop entry monitored by the T269 with two-way audio and strobe capability, combined with an interior or rear coverage point from the T262H, gives a compact business a mixed deterrence and monitoring setup on a single NVR.
- Sites Planning to Expand: Buyers who need 2 cameras now but want to add more later benefit from the 4-channel NVR, which accepts 2 additional HiLook IP cameras without any recorder upgrade.
- DIY Installers Wanting Simplified Wiring: The PoE NVR removes the need to run separate power to each camera, keeping the installation to a single cable run per camera location from the NVR location.
Why Choose the HiLook 2 Camera Kit
Most entry-level 2-camera kits supply 2 identical cameras covering the same scenario. This kit is structured differently: the IPC-T269-MU/SL brings active deterrence with spotlight, blue and red strobe, two-way audio, 30m IR, 120dB WDR, and AcuSense to the highest-risk location, while the IPC-T262H provides 6MP AcuSense monitoring at a secondary point. A system built from 2 standard cameras would not include on-site deterrence triggers, pre-recorded audio broadcasts, or the visual warning lighting that the T269-MU/SL adds. The HiLook NVR-104MH-C-4P delivers 4K output and 40Mbps throughput with 4 native PoE ports, supporting a clean single-cable installation. Available through Security Wholesalers, this kit is suited to homes, small businesses, and shopfronts where one camera position needs to do more than record.
Package Inclusions
- 1 x HiLook IPC-T269-MU/SL All in One Camera with Blue / Red Strobe / Audio – 6MP AcuSense Outdoor Turret Camera (2.8mm Lens, 30m IR, Two-Way Audio, White Spotlight, Blue and Red Strobe, IP67, H.265+, 120dB WDR)
- 1 x HiLook IPC-T262H 6MP AcuSense Turret Camera – 6MP AcuSense Outdoor Turret Camera with Built-In Microphone
- 1 x HiLook NVR-104MH-C-4P – 4CH PoE NVR (4 PoE Ports, 40Mbps, 4K HDMI Output, VGA Output, 1 HDD Bay, H.265/H.264)
- NOTE – no HDD is included with this NVR. A surveillance-grade hard drive must be added separately before the system can record.
Buyer Decision Tips
Storage Planning: The NVR-104MH-C-4P has 1 HDD bay and supports surveillance-grade hard drives. At 6MP resolution with H.265+ compression across 2 cameras, a 2TB drive will store several days of continuous footage. If you intend to record motion-triggered events only, a 2TB drive is a practical starting point. For longer retention or if you plan to add cameras later, consider a 4TB or larger surveillance HDD at the time of purchase.
Camera Placement for the T269-MU/SL: The active deterrence and two-way audio features on the IPC-T269-MU/SL deliver the most value when positioned at a location where a person is likely to pause, such as a front door, gate, or driveway entry. Placing it at a wide open yard or distant perimeter position reduces the practical benefit of the strobe and audio functions, as the deterrence range is most effective at closer distances.
Key Features & Technical Specifications
| Kit Contents | 1 x IPC-T269-MU/SL, 1 x IPC-T262H, 1 x NVR-104MH-C-4P |
| Camera Resolution | 6MP (both cameras) |
| T269-MU/SL Lens | 2.8mm fixed |
| T269-MU/SL IR Range | 30m |
| T269-MU/SL Deterrence Features | White spotlight, blue and red strobe lights, built-in speaker, built-in microphone, two-way audio |
| T269-MU/SL WDR | 120dB |
| T269-MU/SL Weather Rating | IP67 |
| T269-MU/SL Compression | H.265+ |
| AI / Detection | AcuSense human and vehicle classification (both cameras) |
| T262H Audio | Built-in microphone |
| NVR Model | HiLook NVR-104MH-C-4P |
| NVR Channels | 4 channels |
| NVR PoE Ports | 4 x PoE (plug-and-play) |
| NVR Bandwidth | 40Mbps incoming |
| NVR Video Output | 4K HDMI, VGA |
| NVR HDD Bay | 1 bay (no HDD included) |
| NVR Compression | H.265 / H.265+ / H.264 / H.264+ |
| Mobile App | HiLookVision (iOS and Android) |
| HDD Included | No – must be purchased separately |
Ideal Use Cases
Front Entry with Active Response
Positioning the IPC-T269-MU/SL at a front door or pedestrian gate lets the white spotlight and blue and red strobe lights fire on detection, providing a real-time on-site response rather than silent recording only.
Driveway and Secondary Zone Coverage
Pairing the active deterrence T269-MU/SL on the driveway with the T262H covering a backyard, side access, or carport gives a 2-zone setup where the higher-risk approach gets deterrence capability and the secondary zone gets standard 6MP AcuSense recording.
Small Retail or Shopfront
A shop entry monitored by the T269-MU/SL with two-way audio allows staff to communicate with customers or deter loitering after hours, while the T262H covers an internal aisle or rear storage area on the same NVR.
Rental Properties and Strata Entrances
The AcuSense filtering across both cameras keeps notifications focused on people and vehicles, reducing nuisance alerts from wind-blown foliage or passing animals, which is practical for self-managed rental or strata sites with remote monitoring.
Starter System with Room to Grow
The NVR-104MH-C-4P has 4 PoE channels with 2 in use, leaving 2 spare ports. Sites that want to begin with a lower upfront cost and add cameras over time can do so without replacing the recorder.
Choosing the Right Model
- Choose this kit if: You need at least one camera position with active deterrence, two-way audio, and strobe lighting, while keeping the second camera as a standard 6MP AcuSense monitoring unit, all on a PoE NVR with room to expand to 4 cameras.
- Choose a different kit if: You need 2 identical active deterrence cameras across 2 high-risk entry points rather than a mixed setup. A kit supplying 2 x T269-MU/SL cameras would be more appropriate for that scenario.
- Choose a different kit if: You already need 3 or 4 cameras from day one. This 2-camera kit is best suited to sites with 2 clearly defined coverage zones, or buyers who want to expand incrementally using the spare PoE ports.
- Add a hard drive before installing: This kit does not include storage. The NVR-104MH-C-4P has 1 HDD bay, and the system cannot record without a compatible surveillance-grade hard drive installed first.
FAQs
- Does the IPC-T269-MU/SL support two-way audio out of the box?
Yes. The IPC-T269-MU/SL includes both a built-in microphone and a built-in speaker. You can speak through the HiLookVision mobile app in real time, or configure pre-recorded audio messages to play automatically when a detection event is triggered on the camera. - Does the IPC-T262H also have two-way audio?
No. The IPC-T262H includes a built-in microphone for one-way audio capture and recording, but it does not have a built-in speaker. Two-way audio is a feature of the IPC-T269-MU/SL only in this kit. - What triggers the strobe lights and spotlight on the T269-MU/SL?
The blue and red strobe and white spotlight on the IPC-T269-MU/SL are triggered by detection events using AcuSense human and vehicle classification. The camera activates the deterrence response when a person or vehicle is detected, rather than firing for every motion event including animals or wind movement. - Does the NVR-104MH-C-4P need a separate PoE switch?
No. The NVR-104MH-C-4P has 4 built-in PoE ports. Both cameras connect directly to the NVR via Cat5e or Cat6 cable, receiving power and transmitting video data over a single cable run per camera. No external switch or separate power supply is required at the camera locations. - What hard drive should I use with the NVR-104MH-C-4P?
The NVR-104MH-C-4P supports 1 surveillance-grade HDD. WD Purple and Seagate Skyhawk drives are recommended. For 2 cameras recording continuously at 6MP with H.265+ compression, a 2TB drive provides several days of continuous footage. If you plan to use all 4 channels or want longer retention, a 4TB or larger drive is worth considering. Compatible options are listed on this page. - Can I add more cameras to this kit later?
Yes. The NVR-104MH-C-4P has 4 PoE channels and this kit uses 2, leaving 2 spare ports. Compatible HiLook IP cameras can be connected to the spare ports without any recorder replacement. The NVR supports up to 40Mbps total incoming bandwidth across all channels. - How do I monitor this system remotely?
The NVR-104MH-C-4P supports remote viewing and alarm management through the HiLookVision mobile app on iOS and Android. You can view live feeds, receive AcuSense event notifications, and use the two-way audio function on the T269-MU/SL directly from your phone. This kit is available through Security Wholesalers and is compatible with the HiLookVision platform as configured.
Cabling Considerations
- Cable Type: Cat5e or Cat6 network cable is recommended for all camera runs from the NVR. Cat6 is preferred for longer runs or future-proofing.
- Maximum PoE Cable Run: Standard PoE over Cat5e or Cat6 supports up to 100 metres per camera run. Runs beyond this distance will result in power loss and connectivity issues. Plan NVR placement to keep all runs within this limit.
- PoE Power Source: Both cameras draw power directly from the NVR-104MH-C-4P PoE ports. No external power adapters are required at the camera end, simplifying installation to a single cable per location.
- Wiring Tips: Route cables through roof cavities where possible and use conduit for any exposed outdoor cable sections to protect against UV degradation and physical damage. Label each cable at both ends before installing cameras to simplify any future troubleshooting or expansion.
Product Video Samples
Additional Information
No additional downloads available for this product.
Add below if required.
Installation in Sydney or Melbourne
| Image | Name | Price | Buy |
|---|---|---|---|
| CCTV Installation for Houses - 4 Cameras - Sydney & Melbourne Only | $990.00 inc GST + & Support | ||
| CCTV Installation for Warehouses - Sydney & Melbourne Only | $190.00 inc GST + & Support |









































