Product SKU: HA-ALARM-PIR1-AUS
Product Overview
For households and small businesses that require dependable wired intrusion detection without frequent false alarms, the HiLook HA-ALARM-PIR1-AUS is a well-specified passive infrared motion detector built for indoor wall or ceiling mounting. Covering up to 18 metres with an 85.9-degree field of view, it suits living rooms, hallways, retail floors, and open-plan office spaces where wide volumetric coverage matters. Its 10kg pet immunity reduces unwanted triggers caused by cats, small dogs, and other domestic animals moving through monitored zones. Featuring 3D optics, digital temperature compensation, creep-zone protection directly beneath the unit, and anti-insect filtering, it is engineered to detect genuine human movement rather than environmental noise. Compatible with Hikvision’s AX Hybrid PRO and other wired alarm control panels via selectable end-of-line resistors, the HA-ALARM-PIR1-AUS integrates cleanly into new installations and panel upgrades alike.
Key Capabilities
18m Detection Range with 85.9-Degree FOV
A single unit covers the full length of a typical residential room or retail floor. The wide horizontal angle reduces the number of detectors required to achieve complete volumetric coverage in open indoor spaces.
10kg Pet Immunity
Animals up to 10kg moving through the detection zone are ignored, allowing the system to remain armed in homes and offices with cats or small dogs present. This directly reduces nuisance alarm events and unnecessary callouts.
3D Optics for Detection Accuracy
The 3D optical system focuses infrared signals more precisely across detection zones, improving discrimination between genuine human movement and background thermal variations that can cause drift in standard PIR lenses.
Creep-Zone Protection
Coverage extends to the area directly beneath the detector housing, eliminating the blind spot that exists in many standard PIR units. This prevents an intruder from crouching and moving under the sensor undetected.
Selectable EOL Resistors and Wide Voltage Range
Multiple selectable end-of-line resistor values allow the detector to interface with a broad range of wired alarm control panels. Operation from 9 to 16V DC with polarity reverse connection protection simplifies wiring in both new builds and retrofit installations.
Best For
- Pet-Occupied Homes: The 10kg pet immunity setting allows the system to remain armed while cats and small dogs move freely, making it practical for always-armed residential installations.
- Open-Plan Commercial Interiors: The 18m range and 85.9-degree coverage angle suit retail floors, open offices, and reception areas where a single detector needs to span a wide space.
- Hikvision AX Hybrid PRO Systems: Confirmed compatibility with the AX Hybrid PRO panel makes this a natural choice when expanding or specifying a Hikvision-based wired alarm installation.
- Retrofit Wired Panel Upgrades: Selectable EOL resistors mean this unit can be matched to the supervision values required by existing third-party wired control panels without additional resistor modification.
Why Choose the HiLook HA-ALARM-PIR1-AUS
Where basic PIR detectors rely on single-plane optics and fixed sensitivity, the HA-ALARM-PIR1-AUS brings 3D optics, digital temperature compensation, and dedicated creep-zone coverage into a compact wired housing. These features matter in real installations: temperature compensation maintains consistent sensitivity whether a room is air-conditioned in summer or cold in winter, while the creep zone closes the low-detection gap that basic units leave directly below the sensor. The anti-insect filtering further reduces false triggers in spaces where moths and flies are common near light fittings. With selectable EOL resistors and a 9 to 16V operating range, this detector connects to a wide field of compatible panels rather than locking you into a single ecosystem. Available at Security Wholesalers, the HA-ALARM-PIR1-AUS is a well-rounded wired detector for installers who need accuracy and flexibility without overspecifying.
Buyer Decision Tips
Mounting Height and Coverage: This detector is rated for installation between 1.8m and 2.4m above floor level. Mounting outside this range will shift the detection pattern and may reduce effective range or create floor-level blind spots. In rooms with high ceilings, confirm mounting height before installation and position the unit at the lower end of the approved range to maintain accurate creep-zone coverage directly beneath the sensor.
Key Features & Technical Specifications
| Model |
HiLook HA-ALARM-PIR1-AUS |
| Detection Technology |
Passive Infrared (PIR) |
| Detection Range |
Up to 18 metres |
| Field of View |
85.9 degrees horizontal |
| Pet Immunity |
Up to 10kg |
| Optics |
3D optic lens |
| Temperature Compensation |
Digital temperature compensation |
| Creep-Zone Protection |
Yes – covers area directly beneath detector |
| Anti-Insect Filtering |
Yes |
| EOL Resistors |
Selectable – multiple values for panel compatibility |
| Operating Voltage |
9 to 16V DC |
| Polarity Protection |
Reverse connection protection included |
| Mounting Options |
Wall or ceiling mount |
| Mounting Height |
1.8m to 2.4m above floor level |
| Installation Environment |
Indoor use |
| Panel Compatibility |
Hikvision AX Hybrid PRO and compatible wired alarm control panels |
Ideal Use Cases
Residential Living Areas and Hallways
The 18m range and 85.9-degree FOV cover typical lounge and hallway configurations from a single mounting point, while pet immunity up to 10kg keeps the system from triggering on cats or small dogs during armed periods.
Retail Shop Floors
Wide volumetric coverage from a ceiling or high wall position monitors product aisles and entry paths after hours. Creep-zone protection prevents anyone crouching near shelving or displays from moving undetected beneath the sensor.
Office and Reception Areas
Open-plan offices and reception spaces benefit from the wide detection angle and accurate 3D optics, reducing the number of detectors needed to achieve full coverage across desks, waiting areas, and access corridors.
Storage Rooms and Warehouses
The 18m range is effective across compact to medium storage areas. Digital temperature compensation maintains detection consistency in spaces where temperature fluctuates due to loading dock access or climate variation.
AX Hybrid PRO System Expansion
Sites already running a Hikvision AX Hybrid PRO panel can add this detector as a confirmed-compatible wired zone input, expanding coverage to additional rooms without changing control panel hardware or software configuration.
Choosing the Right Model
- Choose this model if: You need a wired PIR detector with confirmed 10kg pet immunity, 18m range, and selectable EOL resistors for integration with the Hikvision AX Hybrid PRO or a compatible wired alarm panel in an indoor environment.
- Choose a different model if: Your installation is outdoors or in an unconditioned area, as this detector is rated for indoor use only. If you require wireless operation for a cable-free alarm zone, a wireless PIR detector compatible with your panel’s RF receiver would be more appropriate.
- Choose a different model if: Animals heavier than 10kg are present in the monitored space. The pet immunity ceiling of this unit will not suppress triggers caused by larger dogs, and a detector with a higher or adjustable immunity threshold would be needed.
FAQs
- What is the maximum detection range of the HA-ALARM-PIR1-AUS?
The detector covers up to 18 metres with an 85.9-degree horizontal field of view. This range is achieved at the confirmed mounting height of 1.8m to 2.4m above floor level. Mounting outside this range will alter the detection pattern and may reduce effective coverage.
- Will this PIR trigger if my cat or small dog walks through the detection zone?
The HA-ALARM-PIR1-AUS includes 10kg pet immunity, meaning animals up to 10kg moving through the zone should not trigger an alarm event. Animals heavier than 10kg may still cause triggers, so this unit is not suitable for households with larger dogs unless they are separated from monitored zones during armed periods.
- Is this detector compatible with the Hikvision AX Hybrid PRO alarm panel?
Yes. Compatibility with the Hikvision AX Hybrid PRO is confirmed. It also works with other wired alarm control panels, with selectable EOL resistor values available to match the supervision requirements of different panel brands and models.
- Can the HA-ALARM-PIR1-AUS be used outdoors?
No. This detector is designed for indoor installation only. It does not carry an outdoor ingress protection rating and is not suitable for covered external areas, garages with vehicle access, or any space exposed to outdoor temperature extremes, moisture, or direct airflow.
- What does creep-zone protection mean in practice?
Standard PIR detectors often have a blind spot directly beneath the housing where movement close to the wall goes undetected. The creep-zone protection on the HA-ALARM-PIR1-AUS extends detection coverage to the floor area immediately below the unit, preventing an intruder from moving along the mounting wall without triggering the zone.
- Where can I purchase the HA-ALARM-PIR1-AUS and is technical support available?
The HA-ALARM-PIR1-AUS is part of the Security Wholesalers range, available for trade and installer purchase. Technical documentation including wiring diagrams and EOL resistor configuration options is available to assist with panel integration during installation planning.
Product Video Samples
Additional Information
