Product Overview
Combining thermal detection with off-grid solar power and built-in 4G connectivity, the DS-2TXS2628-7P/QA/GLT/CH30S80-KIT is engineered for perimeter monitoring in locations where mains power and wired networking are unavailable. Built around a dual bi-spectrum design, it pairs a 256×192 VOx uncooled focal plane thermal module with a 2688×1520 optical CMOS sensor, allowing operators to detect intrusions by heat signature while simultaneously capturing detailed visual footage. The 80W photovoltaic panel and 30Ah lithium battery provide sustained off-grid operation, with 4G LTE (Micro SIM) transmission enabling remote access and real-time alerts without running cable infrastructure. Onboard VCA classifies vehicles and humans to reduce nuisance triggers, while an embedded strobe light and audible alarm deliver active deterrence the moment a rule is breached. Temperature exception monitoring across a -20 degrees C to 150 degrees C range adds an early fire detection layer, making this kit suited to unmanned rural boundaries, construction sites, and critical infrastructure where no cable reach is possible.
Key Capabilities
Bi-Spectrum Thermal and Optical Detection
The 256×192 VOx UFPA thermal module detects heat signatures through darkness, smoke, and camouflage, while the 2688×1520 optical sensor captures visual detail. Bi-spectrum image fusion overlays optical detail onto the thermal channel, giving operators both classification context and visual confirmation in a single view.
Off-Grid Solar Power System
The 80W photovoltaic panel charges a 30Ah lithium battery rated for more than 500 charge cycles, sustaining camera operation at sites with no mains connection. With a maximum power consumption of 7.1W (IR on) and a 24-hour average of 2.97W, the system is designed to maintain a charge balance across typical daylight hours.
4G LTE Wireless Transmission
Built-in LTE-FDD/LTE-TDD/WCDMA connectivity via Micro SIM card eliminates the need for cabled network infrastructure. The camera streams live footage, pushes VCA alerts, and supports remote access through iVMS-4200 and Hik-Connect, making it deployable on boundary fences and remote sites without trenching or cabling costs.
Vehicle and Human VCA Classification
Onboard video content analysis distinguishes between vehicles and humans across up to 8 VCA rules, covering line crossing, intrusion, region entrance, and region exiting. Target coloration highlights classified objects on the thermal image, reducing operator response time and filtering environmental false triggers such as animals or foliage movement.
Active Deterrence with Strobe and Audible Alarm
An embedded white light strobe (up to 30m range) and multi-tone audible alarm activate automatically on VCA or temperature exception trigger. Up to 9 voice alert options are available (3 preset plus 6 importable user-defined), allowing site operators to customise alert audio to specific threat types or operational requirements.
Temperature Exception Monitoring
The thermal module measures temperatures from -20 degrees C to 150 degrees C across 21 configurable rules (10 point, 10 area, 1 line), triggering alarms when readings exceed set thresholds. With an accuracy of plus or minus 8 degrees C, this capability supports early fire detection at locations like dry vegetation boundaries, fuel storage areas, and unmanned industrial yards.
Best For
- Remote Perimeter Security: The 4G LTE module and solar power system together allow deployment on boundary fences, paddock gates, and rural property perimeters where trenching for power or data is not feasible.
- Fire Prevention Monitoring: Temperature exception alarms covering up to 150 degrees C make this kit relevant for unmanned sites with fire risk, including dry-country land boundaries, power infrastructure, and forestry perimeters.
- Construction Site Surveillance: Thermal detection at night, active strobe deterrence, and off-grid power allow round-the-clock monitoring of construction yards and equipment compounds without on-site power connections.
- Critical Infrastructure Boundaries: Water treatment facilities, communications towers, and utility compounds benefit from human and vehicle classification, temperature monitoring, and IP67/IK10 protection in a single self-powered unit.
- Temporary or Seasonal Deployments: The pole-mount design and self-contained power and network system support relocatable installations where permanent infrastructure would not be cost-effective.
Why Choose the DS-2TXS2628-7P/QA/GLT/CH30S80-KIT
Standard IP cameras with IR illuminators cannot detect intrusions in total darkness without illuminating the scene, and they depend entirely on mains power and wired networks. The DS-2TXS2628-7P/QA/GLT/CH30S80-KIT addresses both constraints by combining a VOx uncooled focal plane thermal sensor (NETD less than or equal to 40mK) with an 80W solar panel, 30Ah lithium battery, and built-in 4G LTE, creating a self-contained monitoring node that operates independently of site infrastructure. IK10 mechanical protection, TVS 4000V lightning protection, wind resistance rated to level 12, and an IP67 weatherproof rating ensure the unit survives exposure to the Australian outdoor environment across a -40 degrees C to 65 degrees C operating range. The 32GB onboard MicroSD card (expandable to 256GB) with ANR ensures footage is retained locally even during connectivity outages. This kit is available at Security Wholesalers and carries an 8 to 10 week lead time, which buyers should factor into project timelines.
Package Inclusions
- 1 x DS-2TXS2628-7P/QA/GLT/CH30S80 Bi-Spectrum Solar Thermal Camera Unit
- 1 x 80W Photovoltaic Solar Panel (adjustable tilt: 10 degrees or 30 degrees)
- 1 x Solar Charging Controller
- 1 x Pole Mount Hardware
- Note: The 30Ah lithium battery (CH30S80) must be ordered separately and is not included in the kit box. Confirm battery availability with your supplier before placing the camera order.
Buyer Decision Tips
Battery Ordering: Despite the product name referencing a 30Ah battery, the technical documentation confirms the 30Ah lithium battery must be ordered separately. Do not assume the battery is included in the shipped kit. Confirm stock and order the battery at the same time as the camera kit to avoid delays, particularly given the 8 to 10 week lead time on this product.
4G SIM Card Compatibility: This kit uses a Micro SIM card for 4G LTE connectivity. It supports LTE-FDD bands B1/3/5/7/8/20/28 and LTE-TDD bands B38/40/41, which covers Australian carrier networks. You will need to supply and activate a compatible Micro SIM plan with adequate data allowance for continuous video streaming and alert uploads. Budget for a dedicated SIM plan as part of the total operating cost.
Key Features & Technical Specifications
| Thermal Sensor |
Vanadium Oxide Uncooled Focal Plane Arrays (VOx UFPA) |
| Thermal Resolution |
256 x 192 |
| Pixel Pitch |
12 μm |
| NETD |
Less than or equal to 40 mK (at 25 degrees C, F1.0) |
| Thermal Field of View |
50.0 degrees x 37.3 degrees (H x V), 3.6mm focal length |
| Optical Sensor |
1/2.7″ Progressive Scan CMOS, 2688 x 1520 resolution |
| Optical Field of View |
84.0 degrees x 43.1 degrees (H x V), 4.3mm focal length |
| IR Illumination |
Up to 30m, auto-adjusting intensity and angle |
| White Light / Strobe Range |
Up to 30m, adjustable flashing frequency |
| Temperature Measurement Range |
-20 degrees C to 150 degrees C, accuracy plus or minus 8 degrees C |
| VCA |
Vehicle/human classification; line crossing, intrusion, region entrance, region exiting; up to 8 rules |
| Solar Panel |
80W photovoltaic panel, tilt adjustable to 10 degrees or 30 degrees |
| Battery |
30Ah lithium, 10.8V (max output 12.6V), more than 500 charge cycles (ordered separately) |
| 4G Connectivity |
LTE-FDD/LTE-TDD/WCDMA, Micro SIM card |
| Local Storage |
MicroSD/SDHC/SDXC up to 256GB (32GB card included), NAS, ANR |
| Protection Rating |
IP67, IK10, TVS 4000V lightning protection, wind resistance level 12 |
| Operating Temperature |
-40 degrees C to 65 degrees C |
| Power Consumption |
Thermal only: 2.73W; 24-hour average: 2.97W; max (IR on): 7.1W |
| Mount / Weight |
Pole mount; camera unit 26.6kg, packaged 27.79kg |
| Video Compression |
H.265/H.264 (main stream); H.265/H.264/MJPEG (sub-stream) |
Ideal Use Cases
Rural Property Boundaries
On large rural landholdings where fencing perimeters extend beyond cable reach, the self-contained 4G and solar system allows surveillance nodes to be placed at gate entries and boundary corners. The thermal module detects intruders at night without any scene illumination until the strobe alarm is triggered.
Unmanned Construction Sites
Construction compounds with no permanent power connection can deploy this kit on a temporary pole to monitor equipment yards and site access after hours. The active strobe and audible alarm engage on intrusion detection, and footage is stored locally on the onboard MicroSD card regardless of 4G signal quality.
Fire Risk Zone Monitoring
The temperature exception monitoring function measures surface temperatures across up to 21 configurable zones. This allows operators at dry vegetation boundaries, timber yards, or solar farms to receive automatic alerts when thermal readings in a defined area exceed set thresholds, enabling early response before a fire escalates.
Utility and Infrastructure Perimeters
Water treatment plants, communications towers, and power substations in remote or semi-remote locations benefit from the IK10 mechanical protection, TVS 4000V lightning protection, and level 12 wind resistance of this unit. Human and vehicle VCA classification provides reliable alarm filtering in environments where environmental movement is frequent.
Mining and Industrial Sites
Open-cut mine sites and industrial yards with remote access tracks need coverage at entry checkpoints far from site infrastructure. The pole-mount design, self-powered operation, and 4G connectivity allow monitoring nodes to be placed at machinery laydown areas, fuel bunds, and access roads without cable installation.
Temporary Event Security
For outdoor events in locations without permanent infrastructure, this kit can be positioned to monitor crowd perimeters or asset areas. The 4G connection enables real-time monitoring from a central location, and the unit can be relocated after the event due to its pole-mount configuration and self-contained power system.
Choosing the Right Model
- Choose this model if: You need a fully off-grid perimeter camera at a site with no mains power and no wired network, require thermal intrusion detection with vehicle/human classification, and need early fire warning through temperature exception monitoring across a wide temperature range.
- Choose a different model if: Your site has mains power and a wired network available – a standard IP thermal camera would provide equivalent thermal detection without the cost premium of the solar and 4G infrastructure. Similarly, if your monitoring objective is purely visual (colour detail, licence plate capture), an optical-only camera will deliver higher resolution at a significantly lower price point than a bi-spectrum thermal unit.
- Consider before ordering: This kit carries an 8 to 10 week lead time. The 30Ah lithium battery must be ordered separately. You will also need to supply a Micro SIM card with an active 4G data plan. Budget for all three before committing to an installation date.
FAQs
- Is the 30Ah battery included in the kit box?
Despite the product name referencing a 30Ah battery, the technical documentation states the battery must be ordered separately. The kit includes the thermal camera unit, 80W solar panel, solar charging controller, and pole mount hardware. Confirm battery stock and place that order at the same time to avoid a gap between the camera arriving and being able to power it.
- How does the thermal sensor detect intruders without visible light?
The 256×192 VOx uncooled focal plane thermal module detects infrared radiation emitted by all objects based on their temperature. Humans and vehicles emit heat signatures that register clearly against a cooler background, allowing the camera to detect movement in complete darkness, fog, or smoke without needing any illumination. The IR and strobe lights activate only after a VCA rule is triggered, not continuously.
- What 4G bands does this camera support, and will it work with Australian carriers?
The built-in modem supports LTE-FDD bands B1, B3, B5, B7, B8, B20, and B28, plus LTE-TDD bands B38, B40, and B41, and WCDMA bands B1, B5, and B8. Band B28 (700MHz) is the primary regional and rural coverage band used by Australian carriers, meaning the camera is compatible with standard Australian 4G networks. You supply the Micro SIM card and data plan.
- What happens to recorded footage if the 4G connection drops?
The camera stores footage locally on a MicroSD card (a 32GB card is included, expandable to 256GB). Auto Network Replenishment (ANR) is also supported, which automatically uploads locally buffered footage to a NAS or network storage location once the 4G connection is restored, preventing gaps in the recorded timeline.
- Can the temperature monitoring function be used for fire detection?
Yes. The thermal module measures temperatures between -20 degrees C and 150 degrees C across up to 21 configurable measurement rules covering point, area, and line zones. When a surface temperature exceeds a defined threshold, the camera triggers an alarm, which can activate the onboard strobe and audible alert and push a notification via 4G. The accuracy is plus or minus 8 degrees C, which is appropriate for early-stage fire detection rather than precision industrial measurement.
- How is the solar panel oriented, and can the camera be aimed independently of the panel?
The photovoltaic panel tilt is fixed at either 10 degrees or 30 degrees to optimise solar harvest based on site latitude. The camera head adjusts independently, with a pan range of -180 degrees to +180 degrees and a tilt range of -10 degrees to +45 degrees, allowing you to aim coverage without affecting panel orientation.
- What protection does this kit have against lightning and weather?
The camera housing is rated IP67 (dust-tight and submersion-resistant) and IK10 (impact-resistant). TVS 4000V lightning and surge protection is built in, and the unit is certified for wind resistance at level 12 (equivalent to storm-force wind conditions). The operating temperature range extends from -40 degrees C to 65 degrees C, which covers Australian extremes from alpine winter installations to outback summer deployments. This product is part of the Security Wholesalers range and is sold with an 8 to 10 week lead time.
- How long does it take for the kit to arrive after ordering?
The DS-2TXS2628-7P/QA/GLT/CH30S80-KIT carries an 8 to 10 week lead time from order placement. This is a specialist product not held as standard stock. Factor this into your project schedule, particularly if the installation date is tied to a handover or compliance milestone. Order the battery separately at the same time to ensure both arrive before the installation window.
Additional Information
