Product Overview
Built for in-vehicle recording on buses, trucks, fleet vans, and rail vehicles, the Hikvision AE-MN5043(RJ45) is a ruggedised 4-channel mobile NVR with integrated 4G and Wi-Fi connectivity. Featuring an aluminium die-cast, fanless chassis and wide-range power input from +9 to +32 VDC, it is engineered to operate reliably across harsh vehicle environments where temperature, vibration, and power fluctuation are constant factors. Equipped with built-in GPS and GLONASS positioning, a G-sensor, and driving information collection interfaces that log events such as braking, reversing, and turning, the unit captures both video and journey context in a single device. It supports up to 4 direct PoE camera connections plus 4 additional channels via a PoE switch, with H.265/H.264 recording up to 5MP per camera. Dual 2.5-inch HDD/SSD bays and an SD card slot provide flexible onboard storage. A built-in super-capacitor protects against data loss from sudden power cuts, making this unit well suited to fleet operators who need dependable, connected mobile surveillance.
Key Capabilities
4G and Wi-Fi Connectivity
The pluggable 4G module and Wi-Fi module (802.11B/G/N or 802.11AC selectable) allow live video transmission, remote access, and data offload without needing physical cable connections to a base station. This is essential for fleet monitoring across dispersed routes.
Built-in GPS and GLONASS Positioning
Dual-constellation GNSS positioning via GPS and GLONASS embeds precise location data directly into the video stream. This gives fleet operators accurate route playback tied to camera footage, which is critical for incident investigation and driver accountability.
G-Sensor and Driving Event Logging
The built-in G-sensor and information collection interfaces capture driving events including braking, left and right turns, and reversing. These inputs can trigger alarm responses and tag video segments automatically, making post-incident review significantly faster.
Super-Capacitor Power Protection
A built-in super-capacitor prevents data loss and hardware damage caused by sudden power outages, which occur regularly in vehicle environments. Combined with the wide +9 to +32 VDC power input range, the unit tolerates the voltage variations typical of 12V and 24V vehicle systems.
Fanless Aluminium Chassis
The aluminium die-cast body with no fan design manages heat passively, eliminating a common failure point in vibrating vehicle environments. The unit is rated to operate between -20°C and +60°C, covering Australian summer conditions inside vehicle enclosures where temperatures frequently exceed ambient air.
Flexible Storage Configuration
Dual 2.5-inch SATA bays support up to 2TB per HDD or 4TB per SSD, with a separate SD card slot accepting up to 256GB. Redundant recording across both bays is supported, and the pluggable HDD design allows quick swap-outs during vehicle turnaround without powering down the system.
Best For
- Bus and Coach Operators: Supports up to 8 cameras across the cabin, driver area, and external views via PoE plus PoE switch expansion, with GPS-tagged footage for route compliance.
- Heavy Vehicle and Truck Fleets: Wide-range voltage input and super-capacitor protection handle the electrical demands and power interruptions common in 24V truck systems.
- School and Community Transport: Driving event logging via G-sensor and information collection interfaces supports duty-of-care reporting and incident documentation.
- Security and Logistics Vehicles: 4G remote access enables live monitoring of vehicles in transit without requiring depot Wi-Fi, while aviation connectors maintain signal integrity on rough roads.
- Rail and Tram Applications: EN50155 and EN45545 railway certifications confirm the unit meets standards for rolling stock and public transport installations.
Why Choose the AE-MN5043(RJ45)
The AE-MN5043(RJ45) goes beyond a basic mobile recorder by integrating 4G, Wi-Fi, GPS/GLONASS, G-sensor, and driving event capture into a single fanless unit certified to automotive and railway standards including EN50155, EN45545, E-MARK, and ISO-7637-2. A simpler in-vehicle recorder would require separate GPS and telemetry hardware and would lack the connectivity to push footage remotely. The scheduled startup and shutdown feature, combined with configurable shutdown delay of up to 6 hours, protects the vehicle battery while ensuring recording continues after engine-off events. Redundant HDD storage and the pluggable drive design reduce downtime during drive replacements. The AE-MN5043(RJ45) is available at Security Wholesalers and suits fleet operators who need a fully integrated mobile recording solution rather than a patchwork of separate components.
Buyer Tip: This version includes both the 4G module and Wi-Fi module. If your deployment relies solely on depot Wi-Fi offload and has no need for 4G cellular, a version without these modules is available and carries a lower cost. However, if vehicles travel routes where depot connectivity is intermittent or unavailable, the integrated 4G in this unit provides the only reliable path for live remote access and footage retrieval during transit.
Buyer Tip: The AE-MN5043(RJ45) supports up to 4 cameras directly via its onboard PoE interfaces, but total camera count can reach 8 by adding a PoE switch to the EXT.DEV interface. Plan your camera layout before installation. If your application requires more than 8 channels, an 8-channel mobile NVR platform would be more appropriate for the project.
Key Features & Technical Specifications
| IP Camera Channels |
4-ch via onboard PoE interfaces; 4-ch extendable via PoE switch (8-ch total) |
| Max Camera Resolution |
Up to 5MP per channel |
| Video Compression |
H.265 / H.264 |
| Encoding Resolution |
Main stream: 1080P / 720P / WD1 / 4CIF; Sub-stream: 720P / WD1 / 4CIF / 2CIF / CIF |
| Frame Rate |
PAL: 1 to 25 fps; NTSC: 1 to 30 fps |
| Dual Stream |
Supported |
| HDD/SSD Storage |
2 x 2.5-inch SATA; up to 2TB per HDD, up to 4TB per SSD |
| SD Card Storage |
1 x SD card slot, up to 256GB |
| 4G Connectivity |
Pluggable 4G module; 1 x 4G SIM card slot; 1 x FAKRA antenna |
| Wi-Fi |
Pluggable Wi-Fi module; 802.11B/G/N or 802.11AC selectable; 2 x 5.8GHz SMA antennas (WI58 model) |
| GNSS Positioning |
GPS and GLONASS; 1 x FAKRA antenna |
| G-Sensor |
Built-in |
| Alarm Input |
4 high/low level signal inputs; 1 pulse signal input; 1 button input |
| Alarm Output |
2 relay signal outputs |
| Network Interface |
Front: 1 x 10M/100M RJ45; Rear: 1 x 10M/100M 6-pin aviation connector |
| Power Supply |
+9 to +32 VDC (supports 12V and 24V vehicle systems) |
| Power Consumption |
Standby: 0.5W; Full load: 45W |
| Operating Temperature |
-20°C to +60°C |
| Dimensions |
206mm x 225.4mm x 60.1mm |
| Weight |
1.66 kg (without storage media) |
| Certifications |
CE, FCC, E-Mark, EN50155, EN45545, CB, ROHS 2.0, ISO-7637-2 |
Ideal Use Cases
Public Transit Buses
The 8-camera capacity, GPS/GLONASS route logging, and EN50155 certification make this unit well matched to metropolitan bus fleets where passenger safety documentation, driver behaviour monitoring, and remote connectivity are all mandatory requirements.
Freight and Logistics Trucks
The wide +9 to +32 VDC input range and super-capacitor protection handle the electrical environment of 24V heavy vehicles. 4G connectivity allows dispatch centres to access live footage during long-haul runs without relying on fixed network infrastructure.
School Buses and Community Transport
Driving event capture via the G-sensor and information collection interfaces logs braking and turning events that can be reviewed after a reported incident. GPS-stamped footage provides objective evidence for duty-of-care obligations.
Rail and Tram Systems
EN50155 and EN45545 certification confirms compliance with railway rolling stock standards. The fanless aluminium chassis and -20°C to +60°C operating range meet the demands of enclosed tram and train cabin installations across varying Australian climate zones.
Security and Cash-in-Transit Vehicles
The software-based firewall, redundant HDD recording, and power-off data protection address the integrity requirements of high-value transport. Specialised aviation connectors maintain signal stability over the vibration and rough road conditions these vehicles regularly encounter.
Choosing the Right Model
- Choose this model if: Your vehicles require 4G cellular remote access or Wi-Fi offload during transit or at depot, and you need GPS/GLONASS positioning embedded in the video stream alongside driving event telemetry.
- Choose a different model if: Your fleet only requires depot-based video offload with no need for 4G or Wi-Fi, in which case the version without 4G and Wi-Fi modules would reduce cost without affecting local recording performance.
- Choose a different model if: Your application requires more than 8 camera channels per vehicle. An 8-channel mobile NVR platform would provide more onboard PoE ports and greater expansion capacity to suit higher camera-count installations such as articulated buses or larger rail carriages.
FAQs
- How many cameras can the AE-MN5043(RJ45) support?
The unit connects up to 4 IP cameras directly via its onboard PoE interfaces. By adding a PoE switch to the EXT.DEV interface, this can be extended to 8 cameras total. All channels support up to 5MP resolution with H.265 or H.264 compression.
- Does this unit record GPS coordinates into the footage?
Yes. The built-in GPS and GLONASS module records precise positioning data directly into the video stream via a FAKRA antenna. This means playback software can correlate footage with map location at any point in the recording, which is valuable for route auditing and incident investigation.
- What happens to recordings if the vehicle loses power suddenly?
The built-in super-capacitor protects the unit from data loss caused by sudden power interruptions. The power-off protection function preserves key data before shutdown, meaning recordings in progress at the time of a power cut are not lost or corrupted.
- Can the AE-MN5043(RJ45) be accessed remotely while a vehicle is on route?
Yes. The integrated 4G module allows cellular network connectivity for live remote viewing and management while the vehicle is in motion. The Wi-Fi module enables data offload when the vehicle is within range of a depot access point. Both modules are pluggable and included in this variant.
- What storage options are available and how much footage can be stored?
The unit has 2 x 2.5-inch SATA bays supporting up to 2TB per HDD or 4TB per SSD, plus a separate SD card slot accepting up to 256GB. Redundant recording across both HDD bays is supported. Actual retention time depends on camera count, resolution, and compression settings.
- Is the AE-MN5043(RJ45) suitable for installation in a 24V truck?
Yes. The wide-range power input of +9 to +32 VDC covers both 12V and 24V vehicle electrical systems without requiring a separate voltage regulator. The unit also carries ISO-7637-2 certification, which addresses vehicle power line disturbance immunity.
- What railway and automotive certifications does this unit hold?
The AE-MN5043(RJ45) is certified to EN50155 for railway rolling stock electronics, EN45545 for railway fire protection, E-MARK for automotive electromagnetic compatibility, and ISO-7637-2 for vehicle power line transients. These certifications are confirmed in the product datasheet and make the unit eligible for rail and public transport tenders. This model is available through Security Wholesalers for Australian fleet and transport projects.
Additional Information
Add Options
