Product SKU: QRN-1610S / QRN-1630S
Product Overview
Built for multi-camera IP installations, the Hanwha Wisenet QRN-1610S is a 16-channel network video recorder with a built-in 16-port PoE switch, allowing cameras to be connected and powered directly from the unit without a separate PoE switch or power supplies. It supports recording at up to 8 megapixels per camera, with HDMI output at up to 3840×2160 for full 4K display on a compatible monitor. The integrated H.265 compression engine can reduce storage consumption by up to 50 per cent compared to H.264, making the 3TB pre-installed HDD stretch significantly further across 16 channels. With a total recording bandwidth of 128Mbps and support for up to 12TB across its 2 SATA bays, the QRN-1610S is suited to commercial, retail, and multi-site deployments where simplified cabling, high-resolution recording, and storage efficiency are all priorities. Please note: this model has been superseded by the HAN-QRN-1630S.
Key Capabilities
16-Channel PoE Integration
The built-in 16-port PoE switch powers and connects IP cameras over a single Cat5e/Cat6 cable run per camera. This eliminates the need for a separate PoE switch and reduces rack space, wiring complexity, and hardware cost on larger deployments.
4K Recording and Display Output
Supports recording at up to 8MP resolution and delivers HDMI video output at up to 3840×2160. This allows operators to view full 4K detail on a compatible display, useful when reviewing footage from high-resolution cameras covering wide areas or entry points.
H.265 Compression
H.265 encoding can reduce file sizes by up to 50 per cent versus H.264 at equivalent quality. On a 16-camera system recording continuously, this translates directly into longer retention periods from the same storage capacity or lower cost per day of footage retained.
128Mbps Total Recording Bandwidth
A 128Mbps aggregate recording throughput supports high-bitrate streams across all 16 channels simultaneously. This is important when connecting multiple 4K or high-resolution cameras that each require a larger individual bitrate allocation.
3TB HDD Pre-Installed
The QRN-1610S ships with a 3TB hard drive already fitted, so the system can record immediately after installation. This removes a common setup step for first-time deployments and reduces on-site commissioning time.
Expandable Storage Up to 12TB
With 2 SATA bays supporting drives up to a combined 12TB, storage capacity can be upgraded as retention requirements grow. This makes the unit viable for sites that start with shorter retention periods and need to extend them over time without replacing the recorder.
Best For
- Commercial and Retail Sites: The 16-channel capacity and built-in PoE switch suit medium-sized premises such as retail stores, offices, and showrooms where 8 to 16 cameras are needed and a clean, simplified wiring layout is preferred.
- High-Resolution Deployments: Sites using 4K or 5MP cameras benefit directly from the 8MP recording ceiling and 128Mbps bandwidth, ensuring the NVR does not bottleneck the quality of connected cameras.
- Storage-Conscious Installations: Where footage retention is a priority, H.265 compression significantly extends the usable recording window from the pre-installed 3TB HDD without requiring an immediate storage upgrade.
- Installers Seeking Plug-and-Play Simplicity: The integrated PoE switch removes the need to provision a separate managed switch, streamlining the bill of materials and reducing installation time on straightforward 16-camera projects.
Why Choose the QRN-1610S
The QRN-1610S consolidates what would otherwise require a separate NVR, PoE switch, and storage device into a single rack-mountable unit. The 16 built-in PoE ports cover a full camera deployment without any additional switching hardware, and the support for 8MP recording ensures the recorder will not limit future camera upgrades to higher-resolution models. H.265 compression at this channel count provides a meaningful reduction in storage consumption compared to older H.264 recorders, and the pre-installed 3TB HDD means the system is operational from day one. The 2 SATA bays allow storage to be expanded to 12TB as retention needs increase. Available through Security Wholesalers, the QRN-1610S is a practical choice for installers and integrators who need a capable 16-channel PoE NVR without overspending on features a mid-tier commercial site does not require.
Buyer Decision Tips
Storage Planning Across 16 Channels: With H.265 active, a 3TB HDD will record for substantially longer than the same drive on an H.264 system, but exact retention depends on camera bitrate, resolution, and motion frequency. For continuous 4K recording across all 16 channels at higher bitrates, calculate your expected daily storage consumption before deciding whether to populate the second SATA bay at installation. Adding a second drive during initial setup is more cost-effective than scheduling a return visit later.
Model Replacement Consideration: The QRN-1610S has been superseded by the HAN-QRN-1630S. If you order the QRN-1610S, the replacement HAN-QRN-1630S will be dispatched. Confirm that the updated model’s specifications align with your project requirements before ordering, particularly if you are matching against an existing bill of materials or tender specification.
Key Features & Technical Specifications
| Model |
Hanwha Wisenet QRN-1610S |
| Recording Channels |
16 |
| Maximum Recording Resolution |
8MP (4K) |
| HDMI Output Resolution |
Up to 3840×2160 (4K UHD) |
| Video Compression |
H.265 |
| Total Recording Bandwidth |
128Mbps |
| Built-in PoE Ports |
16 |
| Plug and Play |
Yes, via built-in PoE switch |
| HDD Included |
3TB |
| HDD Bays |
2 x SATA |
| Maximum Storage Capacity |
12TB |
| H.265 Storage Saving |
Up to 50% compared to H.264 |
| Superseded By |
HAN-QRN-1630S (replacement unit shipped on order) |
Ideal Use Cases
Retail Premises
A retail site with cameras covering entry points, aisles, stockrooms, and loading areas can connect up to 16 cameras directly to the QRN-1610S PoE ports, with 4K recording providing the detail needed to review incidents across the store floor.
Commercial Office Buildings
Office buildings with camera coverage across lobbies, car parks, stairwells, and floor corridors benefit from the 16-channel capacity and simplified PoE wiring, with H.265 extending storage retention on the pre-installed 3TB drive.
Warehouses and Light Industrial Sites
Warehouses requiring camera coverage across loading docks, racking rows, and perimeter entry points can connect cameras directly to the 16 PoE ports, recording at up to 8MP to capture vehicle movements and personnel activity in detail.
Schools and Educational Facilities
Schools with cameras across gates, walkways, car parks, and building entries can consolidate a full 16-camera deployment through a single recorder unit, simplifying ongoing management and reducing the hardware footprint in the server room or communications cabinet.
Multi-Tenancy and Strata Properties
Apartment complexes and strata sites with shared area cameras covering lifts, lobbies, car parks, and building perimeters can use the 16-channel capacity and expandable storage to maintain extended retention periods for strata compliance obligations.
Choosing the Right Model
- Choose this model if: You need a 16-channel PoE NVR with 4K recording capability, H.265 compression, and a pre-installed 3TB HDD and are aware that the HAN-QRN-1630S will be dispatched as the current replacement unit.
- Choose a different model if: You need fewer than 16 channels and do not require that capacity, as a lower-channel PoE NVR will typically offer a lower entry cost. Alternatively, if you need more than 12TB of onboard storage, a recorder with additional SATA bays or NAS expansion support would be more appropriate.
- Choose a different model if: Your camera count is likely to grow beyond 16 channels in the near term. In that case, a higher-channel recorder with greater bandwidth headroom would avoid a recorder replacement as the system scales.
FAQs
- The QRN-1610S is listed as replaced by the HAN-QRN-1630S. What does that mean for my order?
If you place an order for the QRN-1610S, the HAN-QRN-1630S will be dispatched as the current production replacement. Before ordering, review the HAN-QRN-1630S specifications to confirm they meet your project requirements, particularly if you are working to a tender specification or existing system design based on the QRN-1610S.
- Can I connect any IP camera brand to the QRN-1610S, or is it limited to Hanwha cameras?
The QRN-1610S supports ONVIF-compatible IP cameras from other manufacturers, though full feature integration such as remote configuration and advanced event handling is typically only available with Hanwha Wisenet cameras. Third-party cameras connected via ONVIF may have limited functionality compared to native Hanwha devices. Confirm compatibility with the specific camera models you intend to connect before finalising the system design.
- How long will the pre-installed 3TB HDD record across all 16 channels?
Retention time depends on camera resolution, bitrate settings, and whether recording is continuous or motion-triggered. With H.265 compression reducing file sizes by up to 50 per cent versus H.264, the 3TB drive will store significantly more footage than it would on an older H.264 recorder. For a precise estimate, use a storage calculator with your specific camera bitrate values and recording schedule before committing to a retention target.
- What is the maximum HDD capacity the QRN-1610S supports?
The QRN-1610S has 2 SATA bays and supports a maximum combined storage capacity of 12TB. It ships with a 3TB drive installed in one bay, leaving the second bay available for an additional drive. Populating both bays at installation is recommended if longer retention periods are required from the outset.
- Does the QRN-1610S require a separate PoE switch to power cameras?
No. The QRN-1610S includes a built-in 16-port PoE switch that powers and connects IP cameras directly from the recorder. Each camera requires only a single Cat5e or Cat6 cable run back to the unit, removing the need for a separate PoE switch in the network cabinet and simplifying the overall installation.
- Where can I get support and purchase the QRN-1610S or its replacement?
The QRN-1610S and the replacement HAN-QRN-1630S are available through Security Wholesalers, which supplies Hanwha Wisenet products to installers and integrators across Australia. Technical documentation including the QRN-1610S datasheet is also available for download from the product page.
Additional Information
