Product SKU: CT-ANE-KIT-4CH4CAM
Product Overview
Installers and end users looking for a straightforward, plug-and-play IP surveillance system will find the Hanwha Vision CT-ANE-KIT-4CH4CAM A Series Kit a well-matched starting point for small commercial and residential deployments. The kit pairs 4 x ANE-L7012R Flateye cameras with a single ARN-410S 4-channel PoE NVR pre-loaded with a 2TB HDD, covering everything needed to get a working system online quickly. Each ANE-L7012R delivers 4MP resolution through a 3mm fixed focal lens, 20m IR night vision, and 120dB WDR for scenes with mixed lighting conditions. The ARN-410S supports up to 8MP camera resolutions across its 4 PoE channels, outputs to a 4K HDMI monitor, and connects to the Wisenet Mobile app via P2P for remote viewing without complex port-forwarding. With dual-track recording and a built-in installation wizard, the system is designed to reduce setup time and deliver consistent day and night coverage from the moment it is commissioned.
Key Capabilities
4MP Flateye Cameras with 3mm Fixed Lens
Each ANE-L7012R captures 4MP video through a 3mm fixed focal lens, suited to monitoring entry points, corridors, and open indoor or sheltered outdoor areas where a consistent wide-angle field of view is required without lens adjustment.
4-Channel PoE in a Single Cable Run
The ARN-410S includes 4 integrated PoE ports, meaning each camera receives power and data over a single Cat5e or Cat6 cable. This simplifies cable runs and eliminates the need for separate power supplies at each camera location.
20m IR Night Vision
Built-in IR LEDs on each ANE-L7012R extend coverage to 20m in complete darkness. Combined with the 0 Lux B/W IR threshold, the cameras maintain usable footage in unlit areas such as car parks, stairwells, and storage rooms overnight.
120dB WDR for Challenging Lighting
Wide Dynamic Range at 120dB allows each camera to balance bright and shadowed areas in the same frame, making them practical for doorways, lobbies, and shopfronts where sunlight and indoor lighting create high-contrast scenes.
Built-in Video Analytics
Each camera includes tampering detection, motion detection, defocus detection, virtual area monitoring (intrusion, enter, exit), and virtual line crossing with directional filtering. These allow targeted alerts rather than relying on broad motion triggers alone.
P2P Remote Access and Wisenet Mobile
The ARN-410S supports P2P connectivity, allowing the system to be accessed remotely through the Wisenet Mobile app on iOS or Android, or via Wisenet Viewer CMS on PC or Mac, without requiring complex router configuration.
Best For
- Small Business Entry and Exit Monitoring: The 3mm fixed lens and 4MP resolution on each ANE-L7012R provide wide coverage of doorways, service counters, and reception areas where face and detail capture at close to medium range is the priority.
- Residential Properties with Up to 4 Camera Positions: The kit’s 4-channel PoE NVR supports exactly 4 cameras, making it well sized for homes needing coverage of a driveway, front door, rear entry, and side access without oversizing the recorder.
- Installers Needing a Fast-Deploy Starter System: The built-in NVR installation wizard and plug-and-play PoE setup reduce commissioning time, and the pre-installed 2TB HDD means no additional storage configuration is required before the system goes live.
- Remote Site Monitoring via Mobile: P2P support and Wisenet Mobile app compatibility make this kit suitable for sites where the owner or manager needs to check live or recorded footage from a smartphone without engaging an IT team to configure remote access.
Why Choose the Hanwha Vision CT-ANE-KIT-4CH4CAM
The CT-ANE-KIT-4CH4CAM bundles matched Hanwha Vision hardware into a single purchase, removing the guesswork of pairing cameras with a compatible NVR. The ANE-L7012R cameras carry WiseStream II compression support alongside H.265, which reduces bandwidth and storage demands compared to cameras relying on H.264 alone. The ARN-410S is capable of recording at up to 8MP resolution, meaning the NVR is not the bottleneck if the site later upgrades individual cameras. The 4K HDMI output provides a clean monitoring display without a separate upscaler, and dual-track recording allows simultaneous high-resolution and low-resolution streams. The onboard micro SD slot on each camera adds an independent edge storage option. Available through Security Wholesalers, this kit is positioned for buyers who want a complete Hanwha Vision system with confirmed component compatibility, a 2TB HDD already installed, and a clear upgrade path within the A Series ecosystem.
Package Inclusions
Buyer Decision Tips
Fixed Lens Coverage Planning: The ANE-L7012R cameras use a 3mm fixed focal lens, which provides a wide angle of view suited to shorter distances of roughly 5-10m for face-level detail. If any camera position requires coverage of a longer approach, such as a driveway exceeding 15m or a wide car park bay, a camera with a longer focal length or varifocal lens would be a more appropriate choice for that position, as the 3mm lens cannot be adjusted after installation.
Storage Duration Estimate: The pre-installed 2TB HDD in the ARN-410S supports continuous recording across 4 cameras, with actual retention depending on resolution, frame rate, scene complexity, and whether WiseStream II compression is active. Enabling H.265 and WiseStream II together will significantly extend recording duration compared to H.264 at the same quality level. Sites requiring longer retention should confirm estimated storage duration during setup using the NVR’s built-in storage calculator before go-live.
Key Features & Technical Specifications
| Kit Contents |
4 x ANE-L7012R Flateye cameras, 1 x ARN-410S 4-channel NVR with 2TB HDD |
| Camera Resolution |
4MP |
| Camera Lens |
3mm fixed focal |
| Camera Frame Rate |
Maximum 30fps at 4MP |
| Camera Codec |
H.265 / H.264 / MJPEG, multiple streaming |
| Minimum Illumination |
Colour: 0.13 Lux (F1.6, 1/30sec) / B/W: 0 Lux (IR LED on) |
| IR Range |
20m (65.62ft) |
| WDR |
120dB |
| Day/Night |
Auto (ICR) |
| Video Analytics |
Tampering, Motion detection, Defocus detection, Virtual area (Intrusion / Enter / Exit), Virtual line (Crossing / Direction) |
| Edge Storage |
Micro SD/SDHC/SDXC 1 slot, up to 128GB (per camera) |
| Camera Features |
Hallway view, WiseStream II, LDC, PoE |
| NVR Channels |
4 channels, up to 8MP resolution |
| NVR Codec |
H.265 / H.264 / MJPEG |
| NVR Recording Bandwidth |
40Mbps |
| NVR PoE Ports |
4 x PoE ports (plug and play) |
| NVR Storage |
1 x HDD bay, up to 6TB supported, supplied with 2TB HDD |
| NVR Monitor Output |
4K HDMI |
| NVR Remote Access |
P2P, Wisenet Mobile app (iOS/Android), Wisenet Viewer CMS (PC/Mac) |
| NVR Recording Modes |
Dual track recording |
Ideal Use Cases
Retail Shopfronts and Small Stores
The 4MP resolution and 120dB WDR on each ANE-L7012R handle the contrast between bright shopfront windows and dimmer interior lighting, capturing usable images at entry points, counters, and aisles without overexposure or shadow loss.
Residential Perimeter Coverage
With 4 PoE camera connections and 20m IR on each camera, this kit covers the standard perimeter positions of a suburban home including front entry, rear yard, driveway, and side gate, all recorded to the onboard 2TB HDD.
Office Entrances and Internal Corridors
The hallway view mode on the ANE-L7012R reorients the camera’s aspect ratio to optimise coverage of long narrow corridors and stairwells, reducing the need for additional cameras to monitor linear indoor spaces.
Small Warehouses and Storage Facilities
The virtual line crossing and virtual area intrusion analytics on each camera allow targeted zone monitoring for after-hours activity in storage bays, loading areas, and access points, reducing nuisance alerts from general movement.
Remote or Unattended Properties
P2P connectivity and Wisenet Mobile app support allow owners of holiday homes, rural properties, or unstaffed offices to check live feeds and review recordings from a smartphone without requiring a static IP address or complex port configuration.
Choosing the Right Model
- Choose this model if: You need a complete 4-camera IP system from a single supplier, with matched Hanwha Vision hardware, integrated PoE, a pre-installed 2TB HDD, and a recorder capable of supporting up to 8MP cameras for future upgrades.
- Choose a different model if: You need more than 4 camera positions, as the ARN-410S supports only 4 channels and cannot be expanded. An 8-channel or 16-channel kit within the Hanwha A Series range would be more appropriate for sites requiring broader coverage from the outset.
- Choose a different model if: Any camera location requires a varifocal or motorised lens for distance adjustment. The ANE-L7012R is a fixed 3mm lens camera and cannot be refocused after installation, so positions with variable depth or long approach distances would benefit from a different camera model.
- Choose a different model if: The installation site requires NDAA-compliant hardware as a documented contractual requirement. Confirm NDAA compliance status with the distributor prior to purchase if this applies to your project.
FAQs
- Does the ARN-410S NVR come with a hard drive already installed?
Yes. The CT-ANE-KIT-4CH4CAM includes the ARN-410S pre-loaded with a 2TB HDD. The NVR bay supports up to 6TB in a single drive, so the HDD can be upgraded in the future if longer recording retention is required without replacing the recorder itself.
- Can I add more cameras to this system later?
The ARN-410S has 4 channels and 4 PoE ports. All 4 channels are occupied by the cameras included in this kit. The recorder does not support channel expansion, so if additional cameras are needed, a higher-channel NVR would be required.
- What type of cabling do the cameras need?
Each ANE-L7012R connects to the ARN-410S via a single Cat5e or Cat6 Ethernet cable, which carries both data and PoE power. No separate power cabling is required at the camera end. Standard PoE cable run limits apply, with a maximum recommended run of 100m per cable.
- How do I access recordings remotely on my phone?
The ARN-410S supports P2P connection, which means the Wisenet Mobile app on iOS or Android can connect to the NVR using a device ID without requiring port forwarding or a static IP address. The app allows live viewing, playback, and basic system management from anywhere with internet access.
- What does WiseStream II do and why does it matter for storage?
WiseStream II is Hanwha’s dynamic compression technology that reduces bitrate in areas of low motion and maintains detail in areas of high motion. When combined with H.265 encoding, it can significantly reduce file sizes compared to H.264, which extends how many days of footage the 2TB HDD can retain before overwriting.
- Do the ANE-L7012R cameras work in complete darkness?
Yes. Each camera has a minimum illumination of 0 Lux in B/W mode with the IR LEDs active. The IR range extends to 20m, providing usable monochrome footage in fully unlit environments such as unlit car parks, storage rooms, or unlit outdoor spaces overnight.
- Where can I purchase the CT-ANE-KIT-4CH4CAM and get support for it?
This kit is part of the Security Wholesalers range. Their team can assist with pre-sale questions about camera placement, compatible accessories, and system configuration to help confirm this kit suits the intended installation before purchase.
Cabling Considerations
- Cable Type: Cat5e or Cat6 Ethernet cable is required for each camera. Cat6 is recommended for runs approaching the maximum distance or where the cable is installed in conduit with other cables.
- Maximum Cable Run: Standard Ethernet and PoE specifications allow a maximum cable run of 100m per camera from the NVR’s PoE port to the camera. Runs beyond this length will require a PoE extender or a mid-span switch.
- PoE Considerations: The ARN-410S provides PoE power on all 4 ports. No external PoE injectors or power supplies are needed for the included cameras. Confirm the total PoE power budget of the NVR is not exceeded if cameras are swapped for higher-power models in future.
- Wiring Tips: Run cables through conduit or trunking where they pass through external walls or exposed outdoor sections to protect against UV degradation and physical damage. Terminate cables cleanly with a cable tester before connecting to the NVR to avoid connection issues during commissioning.
Product Video Samples
Additional Information
No additional downloads available for this product.
