Product SKU: CT-ANE-KIT-4CH2CAM
Product Overview
Built for straightforward small-site deployment, the CT-ANE-KIT-4CH2CAM bundles 2 Hanwha ANE-L7012R 4MP Flateye cameras with a 4-channel ARN-410S PoE NVR pre-loaded with a 2TB hard drive. The ANE-L7012R uses a low-profile Flateye housing that sits flush against ceilings or walls, making it well suited to offices, retail counters, small warehouses, and residential installations where a compact footprint is preferred. Featuring a 3mm fixed lens, 120dB WDR, and 20m IR range, each camera handles mixed-lighting environments without adjustment. The ARN-410S recorder delivers plug-and-play PoE connectivity across all 4 ports, a 4K HDMI monitor output, and P2P remote access through the Wisenet Mobile app. With 2 camera slots still available on the NVR, the kit is designed from the outset to allow straightforward expansion as monitoring needs grow.
Key Capabilities
4MP Flateye Camera Housing
The ANE-L7012R uses a slim, flat-profile housing that mounts directly to ceilings or walls without a protruding dome. This keeps the footprint low and unobtrusive in customer-facing or residential spaces while still delivering 4MP resolution at up to 30fps.
Plug-and-Play PoE NVR
The ARN-410S includes 4 built-in PoE ports, so each ANE-L7012R camera connects to the recorder over a single Cat5e or Cat6 run with no separate power supply needed. The included setup wizard simplifies initial configuration for installers and end users alike.
20m Infrared Night Vision
Each ANE-L7012R reaches 0 Lux when IR is active, providing usable night-time footage across a 20m range. This covers typical indoor corridors, car parks under low ambient light, and entry points without requiring additional lighting.
120dB Wide Dynamic Range
With 120dB WDR, the ANE-L7012R manages scenes where bright windows or direct sunlight contrast sharply with shaded areas, maintaining legible detail in both zones simultaneously. This is particularly useful at entry points and reception desks.
2TB Pre-Installed Storage and Expansion Room
The ARN-410S ships with a 2TB HDD installed and supports up to 6TB in its single bay, giving sites the option to upgrade storage capacity without replacing the recorder. For a 2-camera system at standard quality, 2TB provides substantial continuous recording depth.
Best For
- Small Offices and Reception Areas: The Flateye housing sits neatly against ceiling tiles or wall surfaces, and the 3mm lens provides a broad field of view suited to covering entry lobbies and front-desk areas.
- Retail Shopfronts and Counters: 120dB WDR handles the lighting contrast between bright display windows and darker interior zones, keeping footage usable throughout trading hours.
- Residential Properties Requiring Simple Setup: P2P remote access through the Wisenet Mobile app and the NVR’s guided setup wizard make this kit accessible without specialist networking knowledge.
- Sites Anticipating Gradual Expansion: With 2 PoE ports available on the 4-channel NVR after the included cameras are connected, additional cameras can be added later without replacing any core equipment.
Why Choose the CT-ANE-KIT-4CH2CAM
The CT-ANE-KIT-4CH2CAM brings together two confirmed, matched components from Hanwha’s A Series range: ANE-L7012R cameras that are pre-tested for compatibility with the ARN-410S NVR, removing the guesswork of pairing cameras and recorders independently. The 2TB HDD is pre-installed, so the system is ready to record on connection rather than requiring a separate storage purchase. The ARN-410S supports up to 8MP cameras across its 4 channels, meaning the recorder is not a bottleneck if the site later adds higher-resolution models. Dual track recording on the NVR allows simultaneous high-resolution archiving and lower-resolution live streaming without choosing between the two. Available at Security Wholesalers, this kit is positioned as a self-contained starter system for sites that need dependable 4MP coverage from day one with room to scale.
Package Inclusions
Buyer Decision Tips
Lens Coverage Planning: The ANE-L7012R uses a fixed 3mm lens, which provides a wide angle of view suited to rooms, corridors, and entry areas monitored from a ceiling mount. It is not adjustable. If a specific zone requires a tighter frame or longer reach, a camera with a varifocal lens would be the more suitable choice. Measure the width of the area to be covered and confirm that a 3mm fixed field of view captures the full scene from the intended mounting position before committing to this kit.
Storage Capacity and Recording Duration: The included 2TB HDD will store a different number of days depending on frame rate, resolution, and whether motion-triggered or continuous recording is used. The ARN-410S supports a single HDD bay with a maximum capacity of 6TB. If continuous high-resolution recording across multiple cameras is required, confirm estimated storage usage before installation to determine whether the 2TB drive or an upgrade to a larger drive is appropriate for the site’s retention requirements.
Key Features & Technical Specifications
| Kit Contents |
2 x ANE-L7012R cameras, 1 x ARN-410S NVR with 2TB HDD pre-installed |
| Camera Model |
ANE-L7012R |
| Camera Housing |
Flateye (low-profile flush-mount) |
| Camera Resolution |
4MP |
| Lens |
3mm fixed focal |
| Video Codec |
H.265 / H.264 / MJPEG, multiple streaming |
| Max Frame Rate |
30fps at 4MP |
| IR Range |
20m (65.62ft) |
| Min. Illumination |
Colour: 0.13 Lux (F1.6, 1/30sec); B/W: 0 Lux (IR on) |
| Wide Dynamic Range |
120dB WDR |
| Day/Night |
Mechanical IR cut filter (ICR) |
| Camera Analytics |
Tampering, Motion detection, Defocus detection, Virtual area (Intrusion/Enter/Exit), Virtual line (Crossing/Direction) |
| Camera Edge Storage |
Micro SD/SDHC/SDXC, 1 slot, up to 128GB |
| Camera Features |
Hallway view mode, WiseStream II, LDC, PoE powered |
| NVR Model |
ARN-410S |
| NVR Channels |
4 channels, up to 8MP per channel |
| NVR PoE Ports |
4 x PoE ports (plug and play) |
| NVR Recording Bandwidth |
40Mbps |
| NVR Monitor Output |
4K HDMI |
| NVR HDD |
1 bay, up to 6TB supported; 2TB pre-installed in this kit |
| NVR Remote Access |
P2P service, Wisenet Mobile app (iOS/Android), Wisenet Viewer CMS (PC/Mac) |
| NVR Recording Modes |
Dual track recording |
Ideal Use Cases
Small Office Monitoring
The Flateye housing keeps the camera profile low against office ceilings, and the 3mm fixed lens covers a wide field of view across open-plan areas or meeting room entry points. The ARN-410S’s 4K HDMI output supports a clear display on a local monitor at the front desk.
Retail Store Entry and Counter Coverage
120dB WDR on the ANE-L7012R manages the contrast between bright shop windows and darker interior spaces. Two cameras cover entry and point-of-sale positions, with the NVR providing continuous or motion-triggered recording and P2P access for the store owner.
Residential Properties
The guided NVR setup wizard and Wisenet Mobile app make this kit accessible at home without IT support. The 20m IR range covers driveways and entry paths at night, and the 2TB HDD provides extended recording depth for a 2-camera household installation.
Corridor and Hallway Installations
Hallway view mode on the ANE-L7012R rotates the image to a portrait orientation, maximising resolution along the length of a corridor rather than wasting pixels on blank wall areas to the sides. This is directly supported through the camera’s confirmed feature set.
Expandable Starter System
With 2 PoE ports remaining on the ARN-410S after the 2 included cameras are connected, and the NVR supporting cameras up to 8MP resolution, the system can grow alongside a site’s monitoring requirements without replacing the recorder or rewiring.
Choosing the Right Model
- Choose this kit if: You need a factory-matched, ready-to-record 4MP system for a small office, retail site, or home installation where PoE simplicity, a compact camera housing, and remote mobile access are the primary requirements.
- Choose a different kit if: Your site requires more than 4 cameras from the outset, a varifocal or motorised lens for long-distance or zoomed coverage, or outdoor cameras with a confirmed IP weatherproof rating. The ANE-L7012R is designed for indoor use and the 3mm fixed lens cannot be adjusted post-installation.
FAQs
- Is this kit suitable for outdoor installation?
The ANE-L7012R is a Flateye-housing camera intended for indoor use. The product data does not confirm an IP weatherproof rating for this model. If outdoor coverage is required, a camera with a confirmed outdoor IP rating should be used in its place. The ARN-410S NVR is a rack or shelf-mounted indoor device and should always be installed in a sheltered location.
- Can I add more cameras to this system later?
Yes. The ARN-410S has 4 PoE ports and 4 recording channels. This kit uses 2 of those ports, leaving 2 available for additional cameras. The NVR supports cameras up to 8MP resolution, so future cameras do not need to be the same model as the included ANE-L7012R, provided they are compatible with the Hanwha/Wisenet ecosystem.
- How much recording time does the 2TB HDD provide?
Recording duration depends on the resolution, frame rate, number of cameras, and whether recording is continuous or motion-triggered. Two cameras at 4MP with H.265 compression using motion detection will store considerably more footage than continuous full-frame-rate recording. The ARN-410S supports up to 6TB in its single HDD bay, so upgrading the drive is an option if longer retention is needed.
- What does the Flateye housing look like compared to a standard dome?
The ANE-L7012R Flateye design is lower-profile than a traditional dome camera. Rather than projecting a dome shape below the ceiling surface, it sits close to the mounting surface with a flat or very shallow front face. This makes it less obtrusive in office environments, retail spaces, and residential installations where appearance is a consideration.
- Does the ARN-410S require a static IP address for remote access?
No. The ARN-410S uses Hanwha’s P2P service for remote connectivity, which means the NVR can be accessed through the Wisenet Mobile app or Wisenet Viewer CMS without configuring port forwarding or a static IP address. This simplifies remote setup for residential users and small business sites without dedicated IT support.
- What is WiseStream II and does it affect image quality?
WiseStream II is Hanwha’s dynamic compression technology that adjusts the bitrate in real time based on scene activity. In low-motion areas it reduces the bitrate to save storage, and in high-motion scenes it maintains quality by increasing the bitrate. It is designed to reduce overall storage consumption without visibly degrading image quality in normal operating conditions.
- How do I access this system remotely, and is the CT-ANE-KIT-4CH2CAM available now?
Remote access is available through the Wisenet Mobile app on iOS and Android via the ARN-410S’s built-in P2P service, or through Wisenet Viewer CMS on PC or Mac. No subscription fee is confirmed as required for P2P access. The CT-ANE-KIT-4CH2CAM is part of the Security Wholesalers range and stock availability can be confirmed directly with the team.
Cabling Considerations
- Cable Type: Cat5e or Cat6 Ethernet cable is recommended for connecting each ANE-L7012R camera to the ARN-410S NVR’s PoE ports.
- Maximum PoE Cable Run: Standard PoE has a maximum recommended cable run of 100m per port. Runs exceeding this distance may result in power or signal degradation. If longer distances are required, a PoE extender should be used.
- Power Delivery: Each camera is powered directly over the Ethernet cable through the NVR’s built-in PoE switch. No separate power injector or adaptor is required for the cameras within the 100m cable run limit.
- Wiring Tips: Run cables through conduit or within wall cavities where possible to protect against physical damage. Label each cable run at both ends to simplify any future troubleshooting or camera additions to the remaining 2 PoE ports.
Product Video Samples
Additional Information
No additional downloads available for this product.
