Product Overview
Built for remote perimeter and boundary monitoring where mains power and cabling are not available, the DS-2TXS2628-3P/QA/GLT/CH30S80-KIT combines a bi-spectrum thermal camera with an 80W solar panel and a 30Ah lithium battery in a single self-contained kit. The thermal module uses a 256 x 192 VOx uncooled focal plane array with a NETD of 40 mK, enabling reliable detection of personnel and vehicles through smoke, dust, and complete darkness without relying on visible light. The built-in 4G LTE modem with Micro SIM support removes the need for any network cabling, transmitting live footage and alarm events over mobile networks. Active deterrence is integrated directly into the unit via a strobe light and audible alarm, allowing the system to respond to intrusion detections on-site without operator intervention. Temperature exception alarming across a range of -20°C to 150°C adds fire prevention monitoring capability, making this kit suited to unmanned rural, industrial, and critical infrastructure deployments. Please note this product carries an 8-10 week lead time.
Key Capabilities
Bi-Spectrum Thermal and Optical Detection
The camera combines a 256 x 192 VOx thermal module with a 2688 x 1520 optical sensor. Bi-spectrum image fusion overlays optical detail onto the thermal channel, giving operators both heat-signature detection and visual context from a single unit.
Off-Grid Solar Power System
An 80W photovoltaic panel charges the 30Ah 10.8V lithium battery, allowing fully autonomous operation at sites with no mains power. The panel tilt angle can be set to 10 degrees or 30 degrees to suit local sunlight conditions and pole mounting orientation.
Built-In 4G LTE Connectivity
LTE-FDD, LTE-TDD, and WCDMA support across multiple frequency bands allows the kit to transmit video and alarm data over a mobile network using a Micro SIM card. Remote access is supported via Hik-Connect and iVMS-4200 without any fixed network infrastructure.
Temperature Exception Alarming
The thermal module measures surface temperatures from -20°C to 150°C across up to 21 configurable measurement rules, including points, areas, and lines. Alerts trigger when readings exceed defined thresholds, supporting early fire detection at waste, energy, and rural sites.
Active Deterrence with VCA Classification
On-camera video content analysis classifies detections as vehicles or humans and can trigger the embedded strobe light and audible alarm automatically. Up to 8 VCA rules cover line crossing, intrusion, region entrance, and region exiting scenarios, reducing unnecessary responses to animals or environmental movement.
Rugged Protection for Outdoor Deployment
IP67 dust and water resistance, an IK10-rated housing, TVS 4000V lightning protection, and a wind resistance rating of level 12 allow the kit to operate across demanding outdoor environments. Operating temperature range extends from -40°C to 65°C, covering Australian outback and alpine conditions.
Best For
- Remote Perimeter Monitoring: The 4G LTE modem and solar power system make the kit deployable at fence lines, boundary gates, and site entrances where no power or data cabling reaches.
- Fire Risk and Temperature Monitoring: Temperature exception alarming with up to 21 measurement rules supports early fire detection at waste processing facilities, rural properties, and energy sites.
- Unmanned Site Security: On-camera VCA with automated strobe and audio deterrence allows the system to respond to intrusions at construction sites, quarries, and unmanned infrastructure without continuous operator monitoring.
- All-Condition Detection: The VOx thermal module detects heat signatures through smoke, dust, haze, and total darkness, maintaining detection capability where optical-only cameras would lose visibility.
- Temporary or Relocatable Deployments: Pole mount design and self-contained power mean the kit can be repositioned as site layouts change, without re-cabling or infrastructure upgrades.
Why Choose the DS-2TXS2628-3P/QA/GLT/CH30S80-KIT
Most surveillance cameras require both a power source and a wired network connection, which rules them out entirely at remote or infrastructure-free sites. The DS-2TXS2628-3P/QA/GLT/CH30S80-KIT addresses this by combining thermal detection, 4G data transmission, solar charging, and active deterrence into a single pole-mounted system. The 256 x 192 VOx thermal sensor with a NETD of 40 mK performs where standard IP cameras cannot, detecting human and vehicle heat signatures in complete darkness or through obscurants. Temperature measurement across -20°C to 150°C adds a fire prevention layer not available on standard security cameras. The 80W panel paired with the 30Ah battery provides sustained autonomous operation, and IK10 plus IP67 protection with TVS 4000V surge resistance ensures the unit handles harsh Australian outdoor conditions. Available through Security Wholesalers, this kit is suited to projects where off-grid thermal monitoring is a requirement rather than an option. Note the 8-10 week lead time when planning procurement.
Package Inclusions
- 1 x DS-2TXS2628-3P/QA/GLT/CH30S80-KIT Bi-Spectrum Thermal Camera Unit (thermal module: 256 x 192, 3.6 mm; optical module: 2688 x 1520, 4.3 mm; 4G LTE modem; embedded strobe and audio alarm; 30 m IR; IP67/IK10)
- 1 x 80W Photovoltaic Solar Panel with adjustable tilt mount (10 degrees or 30 degrees)
- 1 x 30Ah Lithium Battery Pack (10.8V, max output 12.6V, rated for over 500 cycles)
- 1 x Pole Mount Assembly
Buyer Decision Tips
SIM Card and Data Plan: The 4G modem requires a Micro SIM card, which is not included in the kit. Before ordering, confirm your preferred carrier supports the frequency bands used by this unit: LTE-FDD B1/3/5/7/8/20/28, LTE-TDD B38/40/41, and WCDMA B1/5/8. Video streaming over 4G will consume data continuously during active periods, so a metered plan should be sized around your expected event frequency and live view usage rather than a minimal IoT plan.
Solar Performance and Lead Time: The 80W panel and 30Ah battery are rated for sustained operation, but actual battery life between charge cycles depends on average daily sunlight hours, camera power mode, and how frequently the IR, strobe, and audio alarm activate. In locations with fewer than 4 peak sunlight hours daily or extended overcast periods, assess whether supplementary power input is needed via the 12VDC coaxial port or PoE 802.3af input. Also factor the confirmed 8-10 week lead time into project schedules before committing to installation dates.
Key Features & Technical Specifications
| Thermal Sensor |
Vanadium Oxide Uncooled Focal Plane Array (VOx UFPA) |
| Thermal Resolution |
256 x 192 |
| Pixel Pitch |
12 μm |
| NETD |
40 mK at 25°C, F1.0 |
| Thermal Focal Length / FOV |
3.6 mm / 50.0° x 37.3° (H x V) |
| Optical Sensor |
1/2.7″ Progressive Scan CMOS, 2688 x 1520 |
| Optical Focal Length / FOV |
4.3 mm / 84.0° x 43.1° (H x V) |
| IR Distance |
Up to 30 m (auto-adjusted) |
| Temperature Measurement Range |
-20°C to 150°C (-4°F to 302°F), accuracy ± 8°C |
| VCA Analytics |
Vehicle/human classification; line crossing, intrusion, region entrance, region exiting; up to 8 rules total |
| Active Deterrence |
Embedded strobe (white light, up to 30 m) and audible alarm (3 preset + 6 user-importable voice alerts) |
| Mobile Connectivity |
4G LTE-FDD/LTE-TDD/WCDMA; Micro SIM; LTE-FDD B1/3/5/7/8/20/28; LTE-TDD B38/40/41; WCDMA B1/5/8 |
| Solar Panel |
80W photovoltaic panel; tilt: 10° or 30° |
| Battery |
30Ah lithium, 10.8V, max output 12.6V, rated 500+ cycles |
| Power Supply Options |
12VDC ± 25% (coaxial), PoE 802.3af class 3, solar/battery system |
| Local Storage |
MicroSD/SDHC/SDXC up to 256GB (32GB pre-installed), NAS (NFS, SMB/CIFS), ANR |
| Protection Rating |
IP67, IK10, TVS 4000V lightning protection, wind resistance level 12 |
| Operating Temperature |
-40°C to 65°C (-40°F to 149°F) |
| Camera Dimensions / Weight |
208.9 mm x 106 mm x 105.2 mm / 26.6 kg (full kit assembly) |
| Mount |
Pole mount; camera pan ±180°, tilt -10° to +45° |
Ideal Use Cases
Remote Fence Lines and Boundary Gates
4G LTE connectivity and solar power allow deployment at property boundaries where cabling is impractical. VCA line crossing and intrusion rules trigger the on-camera strobe and alarm without requiring a connected control room.
Mining and Quarry Sites
Thermal detection cuts through dust and airborne particles common at active extraction sites. IP67 and IK10 protection, plus TVS 4000V surge resistance and level 12 wind resistance, keep the system operational in harsh site conditions.
Waste and Recycling Facilities
Temperature exception alarming across -20°C to 150°C with up to 21 configurable measurement rules supports continuous fire risk monitoring at waste processing and recycling yards, where spontaneous ignition is a documented hazard.
Construction and Infrastructure Sites
Pole-mounted and fully self-contained, the kit can be repositioned as site layouts evolve. Human and vehicle classification via VCA reduces unnecessary alarm events in busy construction environments where multiple workers and machines are present.
Agricultural and Rural Properties
Large rural properties with no grid power and limited mobile coverage on lower frequency bands benefit from the multi-band 4G LTE support. The operating temperature range of -40°C to 65°C covers both alpine and outback Australian conditions.
Critical Infrastructure and Utility Sites
Power substations, pipeline corridors, and water treatment perimeters benefit from thermal detection that identifies intruders in complete darkness. The 32GB onboard MicroSD card with ANR ensures footage is retained locally if the 4G connection is interrupted.
Choosing the Right Model
- Choose this model if: Your site has no mains power or fixed network access, requires thermal detection through smoke or darkness, needs temperature exception alarming for fire prevention, or demands a fully self-contained 4G-connected surveillance unit that deters intruders on-site with strobe and audio.
- Choose a different model if: Your site has reliable mains power and a wired network, in which case a standard optical IP camera will deliver higher-resolution imaging at significantly lower cost. If thermal detection is needed but the site has fixed infrastructure, a wired bi-spectrum camera without solar and 4G components would reduce both upfront cost and ongoing SIM data expenses. Also consider the 8-10 week lead time before committing to an installation schedule.
FAQs
- Does the 30Ah battery come included in this kit?
Yes. The product name specifies the 30AH vBattery as part of this kit configuration. The battery is a 10.8V lithium pack with a maximum output of 12.6V, rated for over 500 charge cycles and weighing approximately 3.3 kg. Note that some kit variants are sold without the battery, so confirm the specific SKU when ordering.
- What SIM card does the 4G modem accept, and which networks are supported?
The unit accepts a Micro SIM card, which is not supplied in the kit. It supports LTE-FDD bands B1, B3, B5, B7, B8, B20, and B28, LTE-TDD bands B38, B40, and B41, and WCDMA bands B1, B5, and B8. In Australia, band B28 (700 MHz) provides the broadest rural coverage on major carriers, so confirm your chosen SIM supports this band before deployment.
- How does the thermal module detect targets differently from a standard IR camera?
The VOx uncooled focal plane array detects heat emitted by objects rather than reflected light. With a NETD of 40 mK at 25°C, it can distinguish a human or vehicle heat signature through smoke, dust, fog, and complete darkness, conditions where a standard IR camera would lose detection entirely. This makes it effective at sites where ambient obscurants or zero-light conditions are expected.
- What does temperature exception alarming mean, and how is it configured?
The camera measures surface temperatures of objects within the thermal field of view. You define up to 21 measurement rules across three types: individual points, rectangular areas, and lines. When a reading exceeds a user-set threshold, the system triggers an alarm action such as recording, snapshot upload, or the on-camera strobe and audio alert. This is suited to monitoring stockpiles, electrical equipment, or vegetation for early signs of overheating or ignition.
- Can the active deterrence be triggered automatically without operator input?
Yes. The VCA engine classifies detections as human or vehicle in real time and can be configured to trigger the embedded strobe light and audible alarm automatically upon a confirmed detection event. Three preset voice alerts are available for VCA triggers, and up to 6 user-importable custom voice files can be added. This allows the site to respond to intrusions without continuous monitoring.
- What happens to recorded footage if the 4G connection drops?
The unit includes a 32GB MicroSD card pre-installed and supports cards up to 256GB, providing local storage at the camera. Auto Network Replenishment (ANR) is also supported, which means the camera will buffer footage locally during a network outage and upload the missed recordings to NAS storage once the connection is restored. This ensures continuity of evidence even at sites with intermittent mobile coverage.
- How is the solar panel mounted and can the tilt angle be adjusted?
The photovoltaic panel is mounted on the same pole assembly as the camera. The panel tilt can be set to either 10 degrees or 30 degrees depending on latitude and site orientation. The camera itself has a pan range of ±180 degrees and a tilt range of -10 degrees to +45 degrees, allowing independent aiming of the camera and solar panel for optimal positioning.
- What is the lead time and where is this kit available?
The DS-2TXS2628-3P/QA/GLT/CH30S80-KIT carries an 8-10 week lead time, which should be factored into project planning before placing an order. It is part of the Security Wholesalers range and is stocked as a specialised thermal and solar surveillance kit suited to remote and off-grid applications.
Additional Information
