Product Overview
For remote properties, rural gates, and temporary sites where mains power and fixed internet simply are not available, the Hikvision DS-2XS2T41G1-ID/4G delivers a genuinely self-contained surveillance solution. This solar-powered camera combines an integrated solar panel, built-in rechargeable battery, and 4G LTE connectivity into a single weatherproof unit, removing the need for any external cabling or infrastructure. Featuring 4MP resolution at 2688 x 1520, a 4mm fixed lens with a 79-degree horizontal field of view, and up to 30 metres of IR night vision, it covers approach paths, gates, and open areas without compromise. Equipped with a built-in microphone and speaker for two-way audio, PIR-based motion detection, and IP67-rated housing, the DS-2XS2T41G1-ID/4G is managed remotely through the Hik-Connect app. Its adjustable solar panel and selectable power modes allow fine-tuning for seasonal sun conditions and varying activity levels across the monitoring period.
Key Capabilities
Solar-Powered Off-Grid Operation
The integrated solar panel and built-in lithium battery allow the DS-2XS2T41G1-ID/4G to operate continuously without mains power or external wiring. The solar panel adjusts from -45 to 45 degrees of tilt and -30 to 30 degrees of rotation, optimising energy capture across different orientations and seasons.
4G LTE Connectivity
A SIM card slot enables live video transmission, remote alerts, and app-based configuration over mobile networks. This removes the dependency on fixed broadband or Wi-Fi, making the camera deployable in rural and temporary locations where network infrastructure does not exist.
Two-Way Audio
The built-in microphone and speaker allow real-time voice communication through the Hik-Connect app. This supports remote verbal deterrence at farm gates, construction site entrances, or unmanned access points without requiring any on-site presence.
PIR-Based Motion Detection
PIR detection triggers alerts and recording in response to heat signatures from people and vehicles, reducing unnecessary activations caused by wind movement, insects, or lighting changes. This is particularly valuable in outdoor open-area deployments where false triggers drain battery capacity.
Selectable Power Modes
Proactive Mode maintains full-time monitoring for high-activity sites, while Standby Mode reduces power draw during low-activity periods to preserve battery life. Matching the power mode to the deployment environment extends operational reliability between low-sun periods.
4MP Resolution with IR Night Vision
The 1/3-inch progressive scan CMOS sensor captures 2688 x 1520 resolution footage, providing enough detail to identify activity across open approaches. The built-in IR illuminator reaches up to 30 metres, maintaining usable night footage at entry points and along fence lines without external lighting.
Best For
- Farms and Rural Properties: The solar and 4G combination means no trenching, no power runs, and no fixed internet required. The camera can be mounted at a gate, shed, or paddock boundary and managed entirely through the Hik-Connect app.
- Construction and Temporary Sites: Sites that change layout or relocate periodically benefit from a camera that needs no infrastructure commitment. The adjustable solar panel and 4G connectivity support fast repositioning as site conditions change.
- Remote Access Points and Gates: Two-way audio and PIR-triggered alerts allow the operator to monitor and communicate at unmanned entry points in real time without requiring a guard or permanent on-site presence.
- Locations with Unreliable Grid Power: IP67-rated housing and battery-backed solar power mean the camera continues operating during power outages or grid interruptions that would disable a conventionally wired system.
Why Choose the DS-2XS2T41G1-ID/4G
Where a standard IP camera requires both a power cable and a network connection, the DS-2XS2T41G1-ID/4G needs neither. The integration of a solar panel, battery, and 4G modem into a single IP67-rated housing removes the two most common barriers to remote surveillance deployment. The adjustable solar panel mounting addresses seasonal sun angle variation, and the dual power modes give installers control over how aggressively the camera uses stored energy. PIR detection focuses recording on genuine activity rather than environmental movement, which directly extends battery runtime between cloudy periods. Two-way audio adds a layer of interaction that a simple recording camera cannot provide. Available at Security Wholesalers, the DS-2XS2T41G1-ID/4G is a purpose-built solution for scenarios where conventional CCTV infrastructure is impractical, not merely an outdoor camera with an added battery pack.
Buyer Decision Tips
SIM Card and Data Plan: The DS-2XS2T41G1-ID/4G requires a separate 4G SIM card and a data plan to transmit video and alerts. Data consumption depends on resolution settings, recording frequency, and how often live view is accessed remotely. For high-activity sites using Proactive Mode, choose a plan with sufficient data headroom. For low-activity deployments in Standby Mode, a smaller data allowance may be adequate. Confirm 4G signal strength at the intended installation point before mounting, as signal quality directly affects remote access reliability.
Solar Panel Placement and Seasonal Performance: The solar panel’s adjustable tilt and rotation allow optimisation for your latitude and compass orientation, but sustained overcast conditions will reduce charging output. In southern Australia during winter months, align the panel as close to north-facing as the mounting location allows and consider Standby Mode to extend battery reserves through lower-light periods. Sites with heavy tree shading or frequent fog may see reduced performance and should account for this when assessing camera placement.
Key Features & Technical Specifications
| Image Sensor |
1/3″ Progressive Scan CMOS |
| Resolution |
2688 x 1520 (4MP) |
| Lens |
4mm Fixed Lens |
| Field of View |
Horizontal: 79°, Vertical: 42°, Diagonal: 94° |
| DORI Distance |
Detect: 90m, Recognise: 35.6m, Identify: 17.9m |
| IR Range |
Up to 30m |
| Minimum Illumination |
0.01 Lux (F1.2, AGC ON), 0 Lux with IR |
| Day/Night Mode |
IR Cut Filter |
| Shutter Speed |
1/3s to 1/100,000s |
| Video Compression |
H.265, H.264, MJPEG |
| Network Connectivity |
4G LTE (SIM card required, not included) |
| Audio |
Built-in Microphone and Speaker (Two-Way Audio) |
| Motion Detection |
PIR Detection |
| Power Supply |
Integrated Solar Panel + Built-in Rechargeable Battery (optional 12V DC input) |
| Solar Panel Adjustment |
Tilt: -45° to 45°, Rotation: -30° to 30° |
| Power Modes |
Proactive Mode, Standby Mode |
| Ingress Protection |
IP67 |
| Remote Management |
Hik-Connect App (live view, alerts, playback, configuration) |
Ideal Use Cases
Farm Gates and Boundary Fencing
The 4G LTE connection and solar power make the DS-2XS2T41G1-ID/4G well suited to farm gate monitoring where trenching power or data cabling is not practical. PIR detection filters unnecessary alerts caused by vegetation movement, and two-way audio enables verbal communication with visitors remotely.
Construction Site Monitoring
Temporary sites benefit from a camera that can be installed quickly without infrastructure. The adjustable solar panel supports placement on scaffolding or temporary poles, and the camera can be relocated as the site evolves without cable or conduit rework.
Remote Car Parks and Hardstands
Open surface car parks away from buildings often lack power access points. The DS-2XS2T41G1-ID/4G can be pole-mounted in the middle of a hardstand area with the solar panel angled for maximum exposure, providing 4MP coverage and remote alert capability without any cable infrastructure.
Unmanned Facility Entrances
Warehouses, storage yards, and industrial facilities with unmanned after-hours entry points benefit from PIR-triggered alerts and two-way audio. The operator can receive a push notification, view live footage via Hik-Connect, and speak through the camera to address unauthorised access without being on site.
Locations with Frequent Power Outages
Properties in regional areas subject to grid interruptions gain continuity of surveillance with a solar and battery-powered unit. Because the DS-2XS2T41G1-ID/4G operates independently of mains power, it continues monitoring and transmitting alerts over 4G even when the property’s main electrical supply is disrupted.
Choosing the Right Model
- Choose this model if: Your installation site has no mains power, no fixed internet connection, and no practical cabling route. The DS-2XS2T41G1-ID/4G is specifically engineered for these conditions with solar power, an internal battery, and 4G as the primary connectivity method.
- Choose a different model if: The installation location has a reliable power supply and wired or Wi-Fi network access. A conventionally powered IP camera in that scenario will provide more consistent performance, higher continuous recording capability, and lower ongoing running costs than a solar 4G unit. Similarly, if your site requires IR coverage beyond 30 metres, a powered bullet camera with longer-range illumination would be more appropriate.
FAQs
- Does the DS-2XS2T41G1-ID/4G include a SIM card?
No. The camera includes the 4G LTE hardware but requires a separately purchased SIM card and a data plan. You will need to insert a nano SIM from an Australian carrier with 4G coverage at your installation location. Data consumption will vary depending on your resolution settings, recording frequency, and how often you access live view remotely.
- Will the camera continue working on cloudy days or overnight?
Yes. The built-in rechargeable battery stores energy collected by the solar panel and continues powering the camera when sunlight is not available. Using Standby Mode during low-activity periods reduces power draw and extends battery runtime through overcast stretches. Prolonged low-sun conditions over multiple days will gradually deplete the battery, so solar panel orientation and power mode selection both matter for long-term reliability.
- What is the IR range of the DS-2XS2T41G1-ID/4G, and is it enough for a farm gate?
The built-in IR illuminator reaches up to 30 metres. For a standard farm gate approach or a single driveway lane, 30 metres provides enough coverage to detect and record movement at the entry point. For wider open areas or longer driveway runs, the 30-metre IR range may not cover the full scene, and supplemental lighting or a different camera should be considered.
- How does PIR detection work on this camera, and why does it matter for a solar-powered unit?
PIR detection uses a passive infrared sensor to identify heat signatures from people and vehicles, triggering alerts and recording only when genuine activity is detected. On a solar-powered unit this is particularly important because it limits unnecessary recordings and alert transmissions that would otherwise consume battery and mobile data. This makes the system more sustainable across sites with variable sun exposure.
- Can I access live footage and receive alerts while I am away from the property?
Yes. The Hik-Connect app provides remote live view, push notifications triggered by PIR detection, and the ability to change camera settings from anywhere with a mobile internet connection. The camera transmits over 4G, so you do not need to be on the same Wi-Fi network. Two-way audio through the app also allows you to speak through the camera in real time.
- Does the camera support local storage, or does it rely on cloud recording?
The DS-2XS2T41G1-ID/4G supports a microSD card for local on-device storage, which reduces reliance on cloud-based recording and avoids ongoing subscription costs for footage access. Check the datasheet for the maximum supported microSD card capacity. Cloud storage options may also be available through Hik-Connect, but local storage is recommended as the primary recording method for off-grid deployments where data costs matter.
- Where can I get support and documentation for this camera in Australia?
The DS-2XS2T41G1-ID/4G is part of the Security Wholesalers range, and the datasheet along with the unboxing and activation guide are available directly on the product page. The Hik-Connect setup guide provides step-by-step instructions for adding the camera to the app after activation. Hikvision’s local support channels can assist with firmware and configuration queries specific to the Australian market.
Additional Information
Hikvision Warranty
3-Year Manufacturer Warranty
All Hikvision IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty and authorised dealer partner support.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit www.securitywholesalers.com.au/terms-and-conditions
Solar-Powered Buying Guide
Solar-Powered 4G Security Camera Buying Guide
Monitoring remote properties, farms, construction sites, or off-grid locations presents unique challenges — especially where power and internet connectivity are limited. Solar-powered 4G security cameras provide an ideal solution, combining renewable energy with mobile network support to deliver uninterrupted surveillance in even the most remote environments.
These cameras operate independently of power mains and wired internet. Instead, they draw energy from solar panels and transmit footage via 4G SIM cards. That means you can monitor your site in real time from virtually anywhere using a mobile app or desktop interface.
Key Advantages
- No Mains Power Required: Ideal for remote locations or areas prone to power outages.
- 4G Connectivity: Stream live video and receive alerts through your mobile network — no need for NBN or Wi-Fi.
- Easy Installation: Completely wire-free setup reduces installation costs and complexity.
- Eco-Friendly: Uses renewable solar energy to power the system, with long-lasting lithium battery storage.
- App Monitoring: Stay connected with real-time footage via smartphone apps such as Hik-Connect, Dahua DMSS, or TP-Link Tapo.
Top Product Recommendations
Hikvision
Dahua
- Dahua 100W Solar Camera System Kit: This standalone system includes a lithium battery and is perfect for monitoring farms, gates, or remote infrastructure. It’s engineered to deliver reliable performance with minimal maintenance.
- Dahua DH-ISMS4G Integrated Solar Monitoring Kit: A ready-to-deploy solution combining a 4G camera and solar panel, designed for long-term surveillance in off-grid environments. Easy to install with plug-and-play components.
- Dahua 120W PTZ Integrated Solar Kit with WizSense: Offers pan-tilt-zoom functionality and smart AI detection with WizSense, ideal for wide-area surveillance. Solar-powered with robust battery capacity for all-day coverage.
TP-Link
- TP-Link VIGI Solar Kit SP6020: Includes a 60W solar panel and 20Ah lithium battery. Features a 4MP full-colour 4G PT camera ideal for mobile viewing, property security, and perimeter monitoring with high efficiency.
- TP-Link VIGI Solar Kit SP9030: Enhanced 90W solar capacity with 30Ah lithium battery and 4G connectivity. This model offers longer runtime and better low-light full-colour performance, suited for extended remote operations.
Explore Similar Remote Monitoring Options
Installation Tips
- Choose a location with optimal sun exposure for consistent solar charging.
- Ensure the SIM card has sufficient mobile data and is compatible with Telstra, Optus, or Vodafone networks.
- Secure the camera angle to face entry points, gates, or assets needing protection.
Key Considerations When Purchasing Solar-Powered Cameras
- Location: Assess the site’s sun exposure and cellular coverage.
- Camera Resolution: Higher resolution provides clearer images but may require more storage.
- Battery Capacity: Ensure the battery can support the camera during periods of low sunlight.
- Storage Options: Decide between local storage (SD card) and cloud storage solutions.
- Weather Resistance: Look for cameras with appropriate IP ratings for outdoor use.
Warranty Information
Most solar-powered security cameras come with a manufacturer’s warranty ranging from 1 to 3 years. It’s essential to keep proof of purchase to ensure warranty coverage. At SecurityWholesalers.com.au, we’ve made it easy for customers to process their warranty claims. All our cameras hold a 3 year manufacturer warranty. Simply reply back to your invoice email and we’ll help trouble shoot the cameras for you. If further investigation is required. we’ll get your product investigated by the manufacturer in a speedy manner. For specific warranty details, refer to the product documentation or contact us directly.
Top 10 FAQs When Purchasing Solar-Powered Cameras for Remote Properties
-
- Do I need Wi-Fi for these cameras to work?
No, solar-powered 4G cameras operate independently of Wi-Fi by using mobile networks.
- What SIM card should I use?
Use a SIM card from a provider with strong coverage in your area, such as Telstra, Optus, or Vodafone.
- How long does the battery last without sunlight?
Battery life varies; some cameras can last several days without sunlight, depending on usage and battery capacity.
- Can I access the camera remotely?
Yes, most cameras offer mobile apps or web interfaces for remote access and monitoring.
- Is installation complicated?
Installation is typically straightforward, with many cameras designed for easy setup.
- What happens during extended cloudy periods?
Cameras rely on battery storage during low sunlight; ensure the battery capacity meets your needs.
- Can these cameras operate in extreme weather conditions?
Many cameras are designed with weather-resistant features; check the IP rating for specifics.
- Do these cameras support motion detection?
Yes, most solar-powered 4G cameras come with built-in motion detection, and some also include PIR sensors or smart motion analytics to reduce false alerts.
- Can I record footage without internet?
Yes, many models support local recording to SD cards even when offline. Footage can be reviewed once reconnected or directly from the SD card.
- Are these cameras suitable for large properties?
Absolutely. With long-range lenses, PTZ (pan-tilt-zoom) functionality, and solar autonomy, these cameras are ideal for covering wide or hard-to-access areas on farms, construction zones, or large off-grid premises.
- What ongoing costs are involved?
Aside from the initial hardware cost, the main recurring expense is the SIM card data plan. There are no ongoing subscription fees unless you opt for cloud storage or enhanced services.
