Product SKU: AXIS P3717-PLE
Product Overview
Wide-area monitoring across a large retail floor, warehouse aisle intersection, or building corner typically demands multiple cameras, multiple cables, and multiple IP addresses. The AXIS P3717-PLE solves this with a single multi-sensor unit housing 4 individually positionable varifocal heads on a circular track, delivering 8MP of combined coverage through one network cable and one IP address. Featuring 360-degree IR illumination, Axis Lightfinder technology, and Forensic WDR, each sensor maintains usable detail across strongly backlit or low-light environments. Each head can be independently adjusted for pan, tilt, roll, and twist, and remote zoom and focus simplifies commissioning without manual lens adjustment at height. The clear cover with no sharp edges keeps all 4 sensors unobstructed in every direction. Built to IP67, IK10, and NEMA 4X standards, the AXIS P3717-PLE is rated for permanent outdoor exposure at high-traffic sites.
Key Capabilities
Four Sensors, One Network Drop
A single PoE cable and one IP address power and connect all 4 camera heads. This dramatically reduces cabling costs and switch port usage at sites where covering multiple directions from a central point would otherwise require 4 separate camera runs.
Individually Positionable Heads
Each of the 4 sensor heads adjusts independently for pan, tilt, roll, and twist along the circular mounting track. This lets installers direct each sensor precisely at a different zone, covering aisle intersections, building corners, or large open floors without blind spots.
Varifocal Lenses with Remote Zoom
The 3-6mm varifocal range (F1.8-2.6) on each head gives a horizontal field of view between 49 and 96 degrees per sensor. Remote zoom and focus adjustment means framing can be set from the management software rather than manually at the mount point.
360-Degree IR Illumination
IR coverage extends in all directions around the unit, supporting night-time visibility across all 4 sensors simultaneously. Combined with Axis Lightfinder technology, the camera maintains usable colour and detail in low-light conditions before switching to IR-assisted monochrome.
Forensic WDR
Forensic WDR is designed for scenes with strong contrast between lit and shadowed areas, such as entrances facing outdoor daylight or warehouse doors. It processes each frame to retain detail across both bright and dark zones simultaneously, without the motion artefacts of older WDR approaches.
Axis Zipstream Compression
Zipstream in H.264 reduces bandwidth and storage requirements by lowering the bitrate during low-activity periods while preserving full detail when motion or forensically relevant content is detected. For a 4-sensor unit running continuously, this saving can be significant across a week of recorded footage.
Best For
- Aisle and Road Intersections: The individually adjustable heads can be directed at each leg of a cross-aisle or road junction, giving simultaneous coverage of 4 directions from one pole or ceiling mount.
- Building Corner Overviews: Mounted at an exterior building corner, the 4 heads can cover adjacent facades, an entry point, and an approach path without requiring separate cameras on each wall.
- Large Retail and Shopping Centre Floors: Wide open floorplates benefit from the combined 8MP output spread across 4 sensors, allowing overview footage of multiple product zones from a single ceiling drop point.
- Warehouses and Car Parks: Sites where running 4 individual cable runs to separate cameras is impractical benefit from consolidating coverage into a single PoE connection rated to IP67 and IK10 for outdoor or exposed installations.
- Lobby and Corridor Intersections: Indoor high-traffic hubs where pedestrian flow moves in multiple directions, and a single camera must monitor entry, exit, and lateral movement simultaneously.
Why Choose the AXIS P3717-PLE
Where a single conventional dome camera captures one view, the AXIS P3717-PLE delivers 4 independently aimed 1080p views through a single PoE connection and one IP address. Each varifocal head offers remote zoom and focus adjustment across a 3-6mm range, so framing does not require a technician working at the mount point for lens adjustment. The combination of 360-degree IR, Axis Lightfinder, and Forensic WDR means all 4 sensors remain effective in challenging lighting, including high-contrast entry points and low-light car parks. Axis Zipstream compression manages the storage impact of running 4 streams continuously. The IP67, IK10, and NEMA 4X ratings confirm the unit is built for permanent outdoor or exposed indoor installation, not just temporary placement. Available at Security Wholesalers, the AXIS P3717-PLE suits projects where reducing cable runs and IP licence counts matters as much as the coverage outcome itself.
Buyer Decision Tips
Coverage Planning: Each of the 4 sensors covers a horizontal field of view between 49 and 96 degrees depending on zoom setting. Before purchasing, map out the zones you need covered from the proposed mount point. If all 4 zones fall within a reasonable arc from a single location, such as a ceiling centre point or building corner, this unit replaces 4 separate camera and cable runs. If your coverage areas are spread across distant walls that cannot be served from one mount, individual cameras with longer cable runs may be more practical.
NVR Compatibility and Stream Count: Although the AXIS P3717-PLE uses one IP address and one network cable, your NVR or VMS software will need to handle 4 simultaneous streams from this single unit. Confirm that your recording platform supports multi-stream multi-sensor Axis devices and that your storage allocation accounts for 4 continuous 1080p streams, even with Zipstream active. Axis Camera Station and compatible third-party VMS platforms support this configuration natively.
Key Features & Technical Specifications
| Total Resolution |
8MP (4x 2MP sensors) |
| Sensor Type |
4x 1/2.8″ progressive scan RGB CMOS |
| Per-Sensor Resolution |
1920×1080 to 160×90 |
| Lens Type |
Varifocal, 3-6mm, F1.8-2.6 (per head) |
| Horizontal Field of View |
96-49 degrees (per sensor) |
| Vertical Field of View |
53-27 degrees (per sensor) |
| Diagonal Field of View |
113-55 degrees (per sensor) |
| IR Illumination |
360-degree IR |
| WDR |
Forensic WDR |
| Low-Light Technology |
Axis Lightfinder |
| Video Compression |
H.264 with Axis Zipstream |
| Network Connectivity |
Single IP address, single network cable |
| Power |
PoE IEEE 802.3af/802.3at, 17W maximum (IR on) |
| Memory |
1024MB RAM, 512MB flash |
| Weather and Impact Rating |
IP67, IK10, NEMA 4X |
| Head Positioning |
Individual pan, tilt, roll, and twist on circular track |
| Remote Zoom and Focus |
Yes |
| Weathershield |
Integrated |
Ideal Use Cases
Shopping Centres and Large Retail Floors
The 4 independently aimed heads can cover separate product zones, checkout areas, and entry points from a single ceiling mount, reducing the number of camera drops needed across a large open floorplate.
Warehouse Aisle Intersections
Mounted at a racking intersection, each head monitors a separate aisle. The 360-degree IR and IP67 rating ensure the unit operates in the low-light, dusty, or wet conditions common in large warehouse environments.
Outdoor Car Parks
The IK10 and NEMA 4X rating alongside IP67 weatherproofing makes the AXIS P3717-PLE suitable for exposed pole or overhead mounting in car parks, with 360-degree IR supporting night-time footage across all lanes simultaneously.
Building Exterior Corners
Positioned at an outer building corner, the adjustable heads can cover 2 building facades, a ground-level entry, and an approach path without requiring a camera on each individual wall surface.
Lobby and Reception Areas
In a high-traffic lobby, the 4 sensors can simultaneously cover the entrance doors, reception desk, lift lobby, and waiting area from a single ceiling point, with Forensic WDR handling the contrast between bright outdoor entry glass and darker interior zones.
Road and Pathway Junctions
For sites with internal road intersections, such as logistics depots or campus environments, each sensor head can be pointed down a separate road leg, capturing vehicle and pedestrian movement in all directions from one pole-mounted unit.
Choosing the Right Model
- Choose this model if: You need to cover 4 distinct directions from a single mount point using one PoE cable and one IP address, and your site conditions require IP67, IK10, and NEMA 4X outdoor durability with 360-degree IR night coverage.
- Consider the AXIS P3719-PLE if: You require higher per-sensor resolution. The P3719-PLE is the confirmed successor model and offers increased megapixel output per head, which may be relevant for sites where subject identification at greater distances is a priority.
- Choose a different model if: Your coverage zones are spread across locations that cannot be served from a single mount point, or if your NVR or VMS platform does not support multi-stream multi-sensor Axis devices. In those scenarios, individual fixed or varifocal cameras with separate cable runs may provide a more straightforward installation.
FAQs
- How does the AXIS P3717-PLE connect to my NVR using only one cable?
The unit uses a single PoE connection, drawing power via IEEE 802.3af/802.3at and communicating through one IP address. All 4 sensor streams are delivered to your network switch through this single cable. Your recording software then accesses all 4 streams from the one device address. Confirm your NVR or VMS supports multi-stream multi-sensor Axis cameras before installation.
- Can each camera head be pointed in a completely different direction?
Yes. Each of the 4 heads adjusts independently for pan, tilt, roll, and twist along the circular track. This means you can aim one head at an entry door, another at a checkout area, a third at a back corridor, and a fourth at an outdoor approach, all from the same ceiling or wall mount point.
- What is the maximum power draw and does the standard PoE spec support it?
The AXIS P3717-PLE draws up to 17W when IR illumination is active. IEEE 802.3at (PoE+) provides up to 30W per port. Confirm your switch or PoE injector is 802.3at rated rather than basic 802.3af (which is limited to 15.4W), as a standard 802.3af port may not supply sufficient power with IR active.
- Is the AXIS P3717-PLE suitable for permanent outdoor installation?
Yes. The camera is rated IP67 (dust-tight and protected against water immersion), IK10 (resistant to 20-joule impacts), and NEMA 4X (suitable for outdoor use including rain and corrosive environments). The integrated weathershield provides additional protection over the lens area.
- What does Forensic WDR do differently from standard WDR?
Standard WDR blends multiple exposures and can introduce motion blur on moving subjects. Forensic WDR in the AXIS P3717-PLE uses a per-pixel approach to maintain detail across both bright and shadowed zones simultaneously, with less degradation on moving people or vehicles in the scene. This is particularly useful at building entry points where indoor and outdoor light levels differ significantly.
- How much storage does running 4 simultaneous 1080p streams require?
Storage requirements depend on scene activity, frame rate, and bitrate settings. Axis Zipstream compression in H.264 actively reduces the bitrate during low-activity periods, which helps manage storage across 4 continuous streams. For a precise estimate, use Axis’s bandwidth and storage calculator with the expected scene complexity and retention period for your specific site.
- Is the AXIS P3717-PLE still in current production?
This model has been succeeded by the AXIS P3719-PLE, which offers higher resolution. The P3717-PLE remains a capable multi-sensor unit for projects where 4x 1080p coverage from one PoE connection meets the site requirements. For availability and stock status, contact Security Wholesalers directly to confirm current supply.
Additional Information
