AXIS P3719-PLE 15MP Multi Sensor Camera, 1440p, 360 deg, Zipstream, WDR, IP66, 3-6 mm

Product SKU: P3719-PLE

Product Overview

Wide-area outdoor monitoring across building corners, road intersections, and large open yards typically demands multiple cameras, separate cables, and multiple IP addresses. The AXIS P3719-PLE consolidates that coverage into a single unit with 4 independently adjustable sensor heads, each capturing 1440p resolution, all delivered through one IP address and one network cable. With a combined 15 megapixels of coverage across 360 degrees, each sensor head can be individually positioned along a circular track with pan, tilt, roll, and twist adjustment, giving installers precise directional control at the time of commissioning. Motorised varifocal lenses spanning 3 to 6 mm allow remote zoom and focus without ladder access after mounting. Rated IP66 and IK09, and equipped with 360-degree IR illumination and Wide Dynamic Range, this multi-sensor camera is built for demanding outdoor environments where continuous, multidirectional coverage from a single mounting point is the practical priority.

Key Capabilities

Best For

• Building Corner Mounting: The 4 independently positionable sensor heads on a circular track make this camera well suited to outer building corners where multiple approach angles must be covered from a single mounting point.
• Road Intersections and Open Outdoor Areas: 360-degree coverage with 15MP combined resolution supports monitoring of wide-open outdoor spaces including intersections, forecourts, and open yards where a single camera position needs to face in all directions.
• Installations Requiring Minimal Cabling: One IP address and one network cable serving all 4 sensor heads reduces infrastructure cost and simplifies network switch port usage for multi-direction coverage scenarios.
• Sites Where Post-Install Lens Adjustment is Needed: Motorised remote zoom and focus across all 4 lenses allows coverage zones to be refined from the management software after physical installation is complete, reducing the need for return visits.

Why Choose the AXIS P3719-PLE

The AXIS P3719-PLE addresses a specific installation challenge: achieving multidirectional high-resolution outdoor coverage without multiplying cable runs, NVR channels, or mounting points. A basic fixed-lens camera provides coverage in one direction. A single PTZ covers a wide area but can only look one way at a time. The P3719-PLE deploys 4 independently framed 1440p sensors through a single cable and IP address, each adjustable in pan, tilt, roll, and twist along the circular mounting track. The motorised 3-6 mm varifocal lenses add remote focus and zoom capability that fixed-lens multi-sensor units cannot match. IP66 and IK09 ratings confirm it is suited to exposed outdoor positions. Zipstream manages the storage load that naturally comes from running 4 simultaneous video streams. Available through Security Wholesalers, the P3719-PLE is a deliberate engineering solution for sites where coverage density from a single mounting point is the primary constraint.

Buyer Decision Tips

Key Features & Technical Specifications

Ideal Use Cases

Choosing the Right Model

• Choose this model if: You need 360-degree outdoor coverage from a single mounting point, want 4 independently adjustable high-resolution sensors delivered through one IP address and one cable, and require motorised remote zoom and focus to frame each direction precisely during or after installation.
• Choose a different model if: You need a camera that can dynamically pan and track moving subjects in real time across the full 360-degree range. The P3719-PLE positions each sensor head at a fixed angle after installation and does not offer continuous motorised PTZ tracking. A dedicated PTZ camera would be more appropriate for active scene-following across a wide outdoor area.
• Choose a different model if: Your NVR or VMS cannot accommodate the 4-stream output or QHD 1440p resolution from each sensor. A standard fixed-lens single-sensor camera would be more compatible with entry-level recording infrastructure.

FAQs

1. Does the AXIS P3719-PLE use a single IP address for all 4 sensors?
   Yes. All 4 sensor heads operate under a single IP address and connect through a single network cable. This simplifies network switch configuration and NVR setup, though your recorder or VMS will still need to handle the 4 independent video streams that the camera outputs simultaneously.
2. Can I adjust where each sensor head points after the camera is mounted?
   Yes. Each sensor head can be individually repositioned along the circular mounting track with pan, tilt, roll, and twist adjustment. This allows each of the 4 directions to be set independently to face different areas. The motorised varifocal lenses also allow zoom and focus to be adjusted remotely through the camera’s management interface without physically accessing the unit again.
3. What resolution does each sensor capture?
   Each of the 4 sensors captures at 2560×1440 (QHD 1440p), giving a combined output of 15 megapixels across the 360-degree coverage area. The capture range per sensor goes down to 80×60 pixels at minimum resolution settings, with the maximum being the full 2560×1440 per head.
4. Is the P3719-PLE suitable for outdoor installation?
   Yes. The camera carries an IP66 weather rating, confirming protection against water ingress from any direction, and an IK09 impact resistance rating. It also includes an integrated weathershield and a clear cover with no sharp edges to prevent distortion across the full 360-degree viewing range. It is designed specifically for unobstructed outdoor mounting positions.
5. How does Zipstream help with a 4-sensor camera like this?
   Running 4 simultaneous QHD video streams generates substantial storage and bandwidth demand. AXIS Zipstream reduces the bit rate dynamically in parts of the scene with low activity, while retaining full image detail in areas where subjects or motion are detected. This can meaningfully reduce storage consumption compared to a flat constant bit rate across all 4 streams around the clock.
6. Does the P3719-PLE work with standard AXIS management software?
   Yes. As an AXIS network camera, the P3719-PLE is compatible with AXIS Camera Management and integrates with a broad range of third-party VMS platforms. Security Wholesalers recommends confirming multi-sensor stream support and QHD resolution compatibility with your specific VMS version before deployment, as licensing models vary between platforms.
7. What is the field of view per sensor on the P3719-PLE?
   Each sensor’s horizontal field of view ranges from 49 degrees at the telephoto end (6 mm) to 101 degrees at the wide end (3 mm) of the varifocal range. The vertical field of view spans 29 to 54 degrees and the diagonal spans 58 to 116 degrees. These ranges apply to each of the 4 sensor heads individually and can be set independently during installation.

Additional Information

• AXIS P3719-PLE Datasheet (AXIS-01500-001)