Product Overview
Built for fleets and mobile surveillance deployments, the Hikvision DS-MP7608HN is an 8-channel mobile NVR housed in a rugged aluminium die-cast chassis designed to withstand constant vibration, temperature variation, and the demands of vehicle-mounted operation. This kit ships with a 1TB HDD pre-installed, so recorders can be commissioned on the vehicle without sourcing additional storage separately. The DS-MP7608HN supports up to 8 IP cameras via onboard PoE, expandable to 16 channels using an external PoE switch, and records each channel at up to 1080p using H.265 compression. Integrated 4G, Wi-Fi, and GPS modules are included, enabling live remote monitoring, over-the-air configuration, and real-time GPS position embedded within the video stream. RS-232, RS-485, and CAN interfaces allow direct integration with vehicle systems for driver behaviour and event-triggered recording. It is well suited to buses, coaches, trains, emergency vehicles, and commercial fleet operators.
Key Capabilities
8-Channel PoE with 16-Channel Expansion
8 onboard PoE ports connect cameras directly without additional switches. Adding an external PoE switch expands capacity to 16 channels, giving fleet operators room to cover more vehicle zones as needs grow without replacing the recorder.
Integrated 4G, Wi-Fi, and GPS
The pluggable 3G/4G and Wi-Fi modules enable live video access and remote configuration over cellular or wireless networks. The built-in GPS module embeds location data directly into the video stream, supporting fleet tracking and incident review with accurate position timestamps.
Dual HDD/SSD Bays Plus SD Redundancy
2 pluggable 2.5-inch bays each support up to 2TB, providing up to 4TB of onboard storage. A dedicated SD card slot accepts cards up to 256GB, functioning as a fallback recording medium if a drive fails or is removed during an incident.
Vehicle System Integration via RS-232, RS-485, and CAN
Multi-protocol interface support allows the DS-MP7608HN to connect directly to vehicle bus systems. Events such as braking, reversing, and indicator activation can trigger recording flags, making footage review faster during investigations and insurance claims.
Wide Voltage Range with Battery Protection
Accepts +9VDC to +32VDC input, covering 12V and 24V vehicle electrical systems. A configurable shutdown delay of up to 6 hours and 24-hour scheduled startup/shutdown prevents battery drain, protecting the vehicle power supply during long idle periods.
H.265 Compression with 1080p Per Channel
H.265 encoding reduces storage consumption compared to H.264 while maintaining 1080p resolution across all 8 channels. This extends usable recording time on the included 1TB HDD and reduces cellular data costs when streaming or uploading footage remotely.
Best For
- Public Transport Fleets: Buses and coaches benefit from the full 8-channel PoE capacity, vehicle CAN bus integration for event logging, and GPS positioning embedded into footage for route and incident management.
- Emergency and Government Vehicles: The aluminium die-cast chassis withstands operational vibration, and the wide voltage input handles varied vehicle power configurations found in emergency response fleets.
- Commercial Truck and Logistics Fleets: Dual HDD bays with up to 4TB capacity support extended recording across long-haul routes, while 4G connectivity allows depot managers to pull footage or check live feeds without waiting for vehicle return.
- Rail and Fixed Transit Vehicles: The expandable 16-channel configuration accommodates platform cameras, interior saloon cameras, and driver-facing cameras from a single recorder, reducing installation complexity.
Why Choose the DS-MP7608HN
The DS-MP7608HN is not a repurposed fixed-site NVR in a modified enclosure. It is a purpose-designed mobile recorder with mechanical shock tolerance, a wide DC voltage range, and vehicle-native interface protocols built in from the factory. The combination of onboard 4G, Wi-Fi, and GPS in a single unit eliminates the need for separate telematics hardware. The SD card redundancy layer and power-off data protection reduce the risk of losing critical footage in situations where drives may be physically removed or power is cut unexpectedly. At the time of purchase, this kit includes a 1TB HDD already fitted, removing the need to source a compatible mobile-rated drive separately. Available through Security Wholesalers, the DS-MP7608HN is backed by a 3-year warranty and local support, making it a practical choice for integrators commissioning multi-vehicle surveillance systems.
Package Inclusions
- 1 x DS-MP7608HN 8-Channel Mobile NVR with integrated 4G module and Wi-Fi module
- 1 x 1TB 2.5-inch HDD (pre-installed)
Buyer Decision Tips
Storage Planning: The included 1TB HDD provides a starting point, but continuous 8-channel 1080p recording at H.265 will fill available storage depending on scene complexity and frame rate. The second HDD bay accepts a second 2.5-inch drive up to 2TB. If your deployment requires extended retention without regular offloading, factor in fitting a second drive before installation. Vehicle-rated HDDs or SSDs are strongly recommended for the second bay given the vibration environment.
Camera Compatibility: The DS-MP7608HN is designed to work with Hikvision mobile IP cameras that connect via RJ45 PoE. Standard fixed-site IP cameras are generally not rated for vehicle vibration or the temperature extremes of in-vehicle enclosures. Pairing this recorder with Hikvision mobile-series cameras ensures mechanical and electrical compatibility across the system.
Key Features & Technical Specifications
| Model |
DS-MP7608HN |
| Video Channels |
8 channels via onboard PoE, expandable to 16 channels via external PoE switch |
| Maximum Recording Resolution |
1080p (2MP) per channel |
| Video Compression |
H.265, H.264 |
| Camera Interface |
8 x PoE (RJ45) |
| HDD Bays |
2 x pluggable 2.5-inch HDD/SSD bays (up to 2TB each) |
| Included Storage |
1TB HDD (pre-installed) |
| SD Card Slot |
1 x SD slot, up to 256GB |
| Wireless Connectivity |
Pluggable 3G/4G module, Wi-Fi module |
| GPS |
Built-in GPS module, location embedded in video stream |
| Vehicle Interfaces |
RS-232, RS-485, CAN bus |
| Power Input |
+9VDC to +32VDC |
| Shutdown Delay |
0 to 6 hours (configurable) |
| Scheduled Startup/Shutdown |
24-hour scheduled operation supported |
| Chassis Material |
Aluminium die-cast |
| Control Methods |
Mouse, IR remote control, web interface, touchscreen |
| Data Protection |
Power-off protection, dual firmware upgrade backup |
Ideal Use Cases
Metropolitan Bus Fleets
The 8-channel PoE capacity covers interior saloon cameras, front and rear exterior cameras, and a driver-facing unit from a single recorder. GPS embedding in the video stream links incidents to precise route positions for operator and authority review.
Intercity Coaches and Charter Vehicles
Extended recording periods on long-haul routes are supported by up to 4TB of HDD storage across 2 bays, reducing how frequently footage needs to be offloaded. The 4G module allows fleet managers to pull specific clips without waiting for vehicle return.
Emergency Service Vehicles
The wide +9VDC to +32VDC input accommodates the variable power conditions found in emergency vehicle electrical systems. The aluminium die-cast housing resists vibration during high-speed response driving, maintaining recording continuity.
Heavy Vehicle and Logistics Fleets
CAN bus integration captures vehicle events such as braking and reversing alongside camera footage, providing combined evidence for insurance assessments and driver behaviour reviews without additional telematics hardware.
Rail and Light Rail Rolling Stock
Expanding to 16 channels via an external PoE switch allows a single DS-MP7608HN installation to serve platform-end, cab, and passenger saloon cameras in a single carriage, reducing the number of recorders and network management points per vehicle.
Choosing the Right Model
- Choose this model if: You need a purpose-built mobile NVR with integrated 4G, Wi-Fi, and GPS in a single vibration-rated chassis, supporting up to 16 IP cameras and offering dual HDD storage with SD card redundancy for fleet or transit vehicle deployments.
- Choose a different model if: Your application requires fewer than 8 cameras and a smaller physical footprint, as a 4-channel mobile NVR may be more appropriate for smaller vehicles such as taxis, rideshare, or light delivery vans where rack space and power draw are more constrained.
- Choose a different model if: Your deployment is entirely fixed-site rather than vehicle-mounted. Fixed-site NVRs offer more storage bay options, higher channel counts, and are designed for stable power environments rather than vehicle DC power with fluctuation and vibration exposure.
FAQs
- Does the DS-MP7608HN come with a HDD already installed in this kit?
Yes. This specific kit includes a 1TB 2.5-inch HDD pre-installed in one of the two drive bays. The second bay remains available for an additional HDD or SSD up to 2TB, allowing total onboard HDD capacity of up to 4TB if a second drive is added.
- Can the DS-MP7608HN connect to standard fixed-site IP cameras?
Technically the recorder accepts standard IP camera streams, but fixed-site cameras are not designed for the vibration, temperature cycling, and physical shock of a vehicle environment. Hikvision mobile-series IP cameras are purpose-rated for in-vehicle installation and are the recommended pairing for this recorder.
- How does the GPS function work on this recorder?
The built-in GPS module records the vehicle’s geographic coordinates directly within the video stream metadata. When reviewing footage, operators can see the vehicle’s location at any point in the recording, which supports incident investigation, route auditing, and insurance reporting without requiring a separate GPS logger.
- What happens to recording if the 4G signal drops?
The DS-MP7608HN records continuously to the internal HDD/SSD regardless of network connectivity. The 4G module is used for remote access, live streaming, and configuration, not for primary storage. Loss of cellular signal does not interrupt local recording to the installed drive.
- How does the shutdown delay feature protect the vehicle battery?
The configurable shutdown delay allows the recorder to remain powered for between 0 and 6 hours after the vehicle ignition is turned off. This is useful for capturing post-trip events. The built-in battery protection mechanism monitors voltage levels and initiates a safe shutdown before the vehicle battery drops to a level that would prevent the engine from starting.
- Can the CAN bus integration be used to tag specific driving events in the footage?
Yes. The RS-232, RS-485, and CAN interfaces allow the DS-MP7608HN to receive signals from the vehicle’s own bus systems. Events such as hard braking, reversing, and indicator activation can be mapped to recording flags, making it straightforward to search the timeline for specific driving events rather than reviewing full-shift footage manually.
- Where can I purchase the DS-MP7608HN kit and get support in Australia?
The DS-MP7608HN 8CH Mobile NVR Kit 1TB HDD is available through Security Wholesalers, which provides a 3-year warranty and local technical support. This is particularly relevant for fleet integrators who need consistent supply across multiple vehicles and access to post-installation assistance.
Cabling Considerations
- Camera Cable Type: Use shielded Cat5e or Cat6 cable for all camera-to-recorder runs within the vehicle. Shielding is important in vehicle environments due to electrical interference from alternators, inverters, and ignition systems.
- Maximum PoE Cable Run: Standard PoE distance limits of 100m apply, though in-vehicle runs are typically much shorter. Ensure cables are routed away from high-current vehicle wiring harnesses to avoid signal interference.
- Power Wiring: Connect the recorder to a fused, dedicated circuit from the vehicle’s power supply. The +9VDC to +32VDC input accommodates both 12V and 24V vehicle systems. Use cable rated for the maximum current draw of the recorder and all connected PoE cameras.
- Wiring Tips: Secure all cable runs with vehicle-rated loom, saddle clips, or conduit to prevent chafing from vibration. Avoid sharp bends at connector entry points on cameras and at the recorder chassis. Where cables pass through vehicle body panels, use rubber grommets to protect the cable jacket.
Additional Information
Add Options
