Product Overview
Built for environments that would degrade or destroy standard surveillance cameras, the DS-2CD6626B/E-HIRA/IR5 is a 2MP outdoor bullet camera engineered around Hikvision’s anti-corrosion housing standards: WF2, C5-M, and NEMA-4X. These ratings make it appropriate for coastal installations, ports, offshore facilities, chemical processing plants, and other sites where salt air, humidity, or corrosive vapours are a constant factor. Equipped with Hikvision’s Darkfighter sensor technology, the camera maintains usable image quality in very low ambient light, capturing full HD 1920×1080 at 60fps. The motorised varifocal lens spanning 3.8-16mm with smart focus allows installers to frame coverage remotely without physically adjusting the lens. A built-in heater extends the operating range to -40°C to +60°C, and 120dB WDR handles mixed lighting common in industrial outdoor settings. IR illumination reaches up to 50m. Note that this item carries a 4-6 week lead time.
Key Capabilities
Anti-Corrosion Housing: WF2, C5-M, NEMA-4X
Three recognised corrosion resistance classifications in a single housing. This combination covers marine and coastal atmospheres, industrial chemical environments, and enclosed washdown-rated enclosures, making this camera appropriate where standard outdoor cameras cannot sustain long-term operation.
Darkfighter Low-Light Sensor
Hikvision’s Darkfighter technology is designed to capture colour and detail at extremely low illumination levels. In industrial and perimeter locations where lighting is minimal or inconsistent, this reduces reliance on supplementary lighting while maintaining image clarity for review and detection purposes.
3.8-16mm Motorised Varifocal Lens with Smart Focus
The motorised lens allows remote zoom and focus adjustment from an NVR or configuration interface, eliminating the need to reposition a ladder or scaffold at height or in hazardous areas. Smart focus automates the focusing process after zoom changes, reducing commissioning time on site.
120dB Wide Dynamic Range
A 120dB WDR rating handles scenes where bright sunlight and dark shadow exist simultaneously, such as loading dock entrances, gate openings, or covered processing areas with external exposure. Detail is retained in both bright and shadowed zones within the same frame.
Built-In Heater: -40°C to +60°C Operation
The integrated heater allows the camera to start up and operate reliably in sub-zero conditions, making it suitable for cold storage facilities, high-altitude industrial sites, or outdoor installations in cold climates. The upper limit of 60°C also covers hot industrial environments.
1080p at 60fps with IP67 Protection
Full HD resolution at 60 frames per second captures fast movement more smoothly than standard 25fps cameras, useful for busy loading areas or vehicle access points. IP67 ingress protection confirms total dust exclusion and protection against water immersion, supporting permanent outdoor mounting.
Best For
- Coastal and Marine Facilities: The WF2 and C5-M anti-corrosion classifications are specifically defined for marine and coastal atmospheric exposure, where salt-laden air accelerates corrosion in standard aluminium or plastic housings.
- Industrial Chemical Environments: NEMA-4X certification confirms the housing is rated for environments with splashing water and corrosive agents, covering chemical plants, processing facilities, and industrial wash-down areas.
- Perimeter Monitoring with Variable Focal Requirements: The 3.8-16mm motorised lens suits installations where the exact coverage distance is confirmed after mounting, such as fence lines, access roads, or wharf perimeters where field adjustment from ground level is required.
- Low-Light Outdoor Perimeters: Darkfighter sensor technology combined with 50m IR range supports monitoring of unlit or poorly lit industrial perimeters, entry roads, and loading zones during night hours without requiring additional lighting infrastructure.
Why Choose the DS-2CD6626B/E-HIRA/IR5
Standard outdoor cameras, including most IP67-rated bullet cameras, are not built to withstand prolonged exposure to marine salt atmospheres or industrial chemical vapours. The DS-2CD6626B/E-HIRA/IR5 combines three recognised corrosion resistance standards in a single unit: WF2 for marine environments, C5-M for industrial coastal atmospheres, and NEMA-4X for washdown and corrosive agent exposure. Paired with Darkfighter low-light performance, a motorised 3.8-16mm varifocal lens with smart focus, and a built-in heater that sustains operation from -40°C to +60°C, this camera is engineered for conditions that eliminate cheaper alternatives within months. The 120dB WDR and 1080p at 60fps round out a specification set that balances image quality with environmental durability. Available at Security Wholesalers, this model is a targeted solution for project specifications that require documented corrosion resistance ratings rather than general weatherproofing claims.
Buyer Decision Tips
Confirm the Required Corrosion Standard Before Ordering: This camera carries a 4-6 week lead time, so specifying it correctly before purchase matters. Verify whether your site specification calls for WF2, C5-M, NEMA-4X, or a combination of these. If your environment is general outdoor use without documented corrosive conditions, a standard IP67 bullet camera will be available from stock faster and at lower cost. Reserve this model for projects where the corrosion classification is a genuine requirement, such as ports, offshore infrastructure, wastewater treatment, or coastal commercial buildings.
Plan Lens Framing Before Final Mount Position: The motorised 3.8-16mm varifocal lens provides significant framing flexibility, but the 50m IR range is a fixed output. Position the camera so the maximum scene depth at your chosen zoom level does not consistently exceed 50m in low-light conditions. At wider zoom settings covering shorter distances, IR performance will be proportionally stronger. Confirm power delivery supports the built-in heater draw, particularly in cold climate installations where heater activation is frequent.
Key Features & Technical Specifications
| Model |
DS-2CD6626B/E-HIRA/IR5 |
| Resolution |
2MP (1920 x 1080) |
| Frame Rate |
Up to 60fps at 1920 x 1080 |
| Lens Type |
Motorised varifocal with smart focus |
| Focal Length |
3.8-16mm |
| IR Range |
Up to 50m |
| Wide Dynamic Range |
120dB |
| Low-Light Technology |
Darkfighter |
| Anti-Corrosion Standard |
WF2, C5-M, NEMA-4X |
| Ingress Protection |
IP67 |
| Built-In Heater |
Yes |
| Operating Temperature |
-40°C to +60°C |
| Housing Type |
Outdoor bullet |
| Lead Time |
4-6 weeks |
Ideal Use Cases
Port and Wharf Monitoring
Wharves and port environments combine salt air, humidity, and direct water spray. The WF2 and C5-M ratings address marine atmospheric corrosion directly, and the motorised varifocal lens allows coverage to be adjusted across variable distances along berths or access roads without camera relocation.
Chemical and Processing Plants
NEMA-4X certification covers environments with corrosive agents and washdown exposure. The built-in heater and -40°C to +60°C operating range also addresses temperature extremes common in processing facilities, including both heated and refrigerated sections of industrial sites.
Coastal Commercial and Industrial Buildings
Buildings within 1km of the coastline experience accelerated metal corrosion from salt-laden air. Standard IP67 cameras are not rated for this exposure. The C5-M classification on this camera is defined specifically for high-salinity coastal and marine industrial atmospheric conditions.
Unlit Perimeter Fencing and Access Roads
Darkfighter sensor performance combined with 50m IR range supports low-light monitoring of perimeter fencing, vehicle entry roads, and unlit approach areas. The 60fps capture rate also reduces motion blur on vehicle headlights and fast-moving subjects at distance.
Cold Climate Outdoor Installations
The built-in heater allows the DS-2CD6626B/E-HIRA/IR5 to start up and operate at -40°C, covering alpine facilities, cold storage distribution centres, and high-altitude infrastructure where condensation and sub-zero temperatures can prevent standard cameras from functioning reliably through winter.
Choosing the Right Model
- Choose this model if: Your installation site requires documented corrosion resistance to WF2, C5-M, or NEMA-4X standards, such as a port, coastal industrial facility, chemical plant, or offshore structure. The motorised varifocal lens and built-in heater add further value where remote focus adjustment or extreme temperature operation is needed.
- Choose a different model if: Your site is a standard outdoor environment without documented corrosive conditions. A conventional IP67-rated outdoor bullet camera will meet the weatherproofing requirement, will be available from stock without a 4-6 week lead time, and will carry a lower unit cost. If resolution above 2MP is a project requirement, a standard outdoor bullet camera in a higher megapixel configuration would better suit that need.
FAQs
- What do the WF2, C5-M, and NEMA-4X ratings actually mean for this camera?
WF2 refers to a corrosion resistance classification for outdoor environments with high humidity and occasional chemical exposure. C5-M is an ISO 12944 coating durability category defined for marine and coastal industrial atmospheres with high salinity. NEMA-4X is a North American standard covering enclosures protected against corrosion, windblown dust, rain, splashing, and hose-directed water. Together, they confirm this camera is rated for some of the most demanding outdoor corrosive environments in which surveillance cameras are deployed.
- Does the anti-corrosion housing affect how the camera is mounted or powered?
The housing is a bullet-style outdoor form factor, so standard wall or pole mounting brackets compatible with Hikvision bullet cameras apply. The built-in heater will draw additional power compared to standard cameras, so confirm your PoE switch or injector delivers sufficient wattage, particularly in cold climates where the heater may activate at startup and run continuously. Check the datasheet for exact power consumption figures before specifying PoE infrastructure.
- How does the motorised varifocal lens work on the DS-2CD6626B/E-HIRA/IR5?
The 3.8-16mm motorised lens allows zoom and focus adjustment to be made remotely through a connected NVR or configuration software after the camera is physically mounted. Smart focus automates the refocus step following any zoom change. This is particularly useful when the camera is installed in elevated or hard-to-access positions, as physical lens adjustment after mounting is not required.
- What is the actual IR range, and is it sufficient for industrial perimeter use?
The camera provides up to 50m of IR illumination. For perimeter fence lines, vehicle entry points, and access roads, 50m typically covers the primary detection zone when the camera is positioned correctly. At the wider end of the zoom range covering shorter distances, IR intensity per square metre increases. For approaches exceeding 50m in consistent darkness, supplementary lighting or repositioning to reduce the monitored distance should be considered.
- Why is 60fps relevant for industrial or commercial perimeter monitoring?
Standard surveillance cameras capture at 25fps. At 60fps, fast-moving subjects such as vehicles, forklifts, or personnel running produce less motion blur in recorded footage. This can improve the readability of footage captured at vehicle entry points, loading docks, or gate areas where identifying movement at speed is a review requirement.
- Why does this product have a 4-6 week lead time?
Anti-corrosion cameras are specialist products manufactured to order or held in limited quantities due to their narrower application base compared to standard outdoor cameras. This lead time is confirmed in the product data and should be factored into project timelines. Orders for this camera through Security Wholesalers should be placed well in advance of the installation date to avoid project delays.
- Is the 120dB WDR rating relevant to industrial outdoor environments?
Yes. Industrial outdoor sites frequently include mixed lighting conditions: gate openings with direct sunlight beyond a shaded internal area, loading docks with overhead artificial lighting contrasting against bright outdoor backgrounds, or floodlit areas adjacent to unlit zones. A 120dB WDR rating allows the camera to produce a balanced image across these high-contrast scenes rather than losing detail in either the bright or dark areas of the frame.
Additional Information
