Product Overview
Running Ethernet cable across a large property, between detached buildings, or to a remote gate or camera pole is often impractical or too costly. The Hikvision DS-3WF02-5AC/D addresses this directly as a 5GHz outdoor wireless bridge kit, supplied as a matched pair of units that create a point-to-point network link without trenching or conduit. Operating on the 802.11ac standard with wireless throughput of up to 867Mbps and a quoted transmission distance of up to 5km under ideal clear line-of-sight conditions, it is designed to carry network traffic for IP cameras, remote devices, and CCTV systems across distances where cable is not an option. Each unit features a built-in 12dBi 2×2 MIMO directional antenna, standard PoE input and output, plug-and-play deployment, and visualised topology management. This makes it a purpose-built alternative to general Wi-Fi extenders for professional outdoor CCTV and network bridging installations.
Key Capabilities
5GHz 802.11ac Wireless Transmission
Operating on the 5GHz band with 802.11ac support, the DS-3WF02-5AC/D avoids the congestion common on 2.4GHz networks. This is particularly useful in industrial and commercial environments where interference from other devices can disrupt stable video transmission.
Up to 867Mbps Throughput
With wireless throughput of up to 867Mbps, this bridge can support the bandwidth demands of multi-channel HD IP camera systems, making it a more capable option than entry-level wireless bridging solutions that struggle with sustained video loads.
Up to 5km Point-to-Point Range
Hikvision specifies up to 5km wireless transmission distance under ideal line-of-sight conditions. This makes the kit suitable for large farms, industrial yards, car parks, gate camera links, and remote outbuildings where distances would otherwise require fibre or extensive cable runs.
Built-in 12dBi 2×2 MIMO Antenna
Each bridge unit includes a built-in 12dBi 2×2 MIMO directional antenna, providing focused transmission between the two endpoints. This directional design concentrates signal between the paired units rather than broadcasting in all directions, improving link stability outdoors.
PoE Input and Output
Standard PoE input and output support simplifies installation at both ends of the link. Power can be delivered to the bridge via the included PoE power supply, and the PoE output port allows a connected network device to be powered through the same bridge unit where the site design permits.
Best For
- Remote Camera Locations: Where an IP camera needs to connect back to an NVR or network switch but running Ethernet cable is not practical, the bridge pair creates a stable wireless network path without trenching or conduit.
- Farms and Large Rural Properties: The up to 5km quoted range under line-of-sight conditions makes this kit suited to connecting sheds, barns, gate cameras, or camera poles on large rural properties back to the main building network.
- Industrial Yards and Warehouses: Connecting a remote structure or external camera position across an open yard or hardstand area where cable management overhead or underground is costly or disruptive.
- Gate and Entry Point Camera Links: A common use case where a camera or intercom at a gate or driveway entry needs a network link back to the main building without a physical cable run across the access way.
Why Choose the DS-3WF02-5AC/D
The DS-3WF02-5AC/D is a purpose-built outdoor wireless bridge kit, not a repurposed consumer Wi-Fi product. The 12dBi directional MIMO antenna on each unit focuses the wireless link between the 2 bridge points rather than broadcasting signal broadly, which matters for outdoor CCTV applications where link consistency directly affects video reliability. The 867Mbps throughput capacity on the 5GHz band provides headroom for multi-camera HD video loads. Supplied as a matched pair with PoE power supplies included, installation does not require separate PoE hardware purchases at each end. The plug-and-play setup and visualised topology management reduce commissioning time compared with configuring generic outdoor access points. For installers and integrators sourcing this kit, it is available through Security Wholesalers alongside compatible Hikvision NVRs and IP cameras for complete system builds.
Package Inclusions
- 2 x Hikvision DS-3WF02-5AC/D wireless bridge units
- 2 x PoE power supplies
- 2 x AC cords
- 1 x Quick start guide
- 1 x Regulatory compliance and safety information
- 4 x Binding tapes
Buyer Decision Tips
Line-of-Sight Requirement: The quoted 5km transmission distance is based on ideal conditions with unobstructed line of sight between both bridge units. Trees, buildings, hills, vehicles, and metal structures can all reduce range significantly. Before specifying this kit, survey the wireless path between both mounting points. Even partial obstructions mid-path can reduce performance. Mounting height at both ends directly affects how clear the signal path will be.
This is a Bridge, Not a Network Switch or NVR Port Replacement: The DS-3WF02-5AC/D extends the network wirelessly between 2 fixed locations. At each end you still need a powered device to connect to: an NVR PoE port, a PoE switch, or a camera. Plan the full network path from camera to NVR before installation, including what is connected to the PoE output port at the remote end and how the other bridge connects into the main site network.
Key Features & Technical Specifications
| Model |
Hikvision DS-3WF02-5AC/D |
| Wireless Standard |
802.11ac |
| Frequency Band |
5GHz |
| Maximum Wireless Throughput |
Up to 867Mbps |
| Maximum Transmission Distance |
Up to 5km (ideal line-of-sight conditions) |
| Antenna Type |
Built-in 12dBi 2×2 MIMO directional antenna |
| PoE Support |
Standard PoE input and output |
| Setup |
Plug-and-play |
| Management |
Visualised topology management |
| Installation Type |
Outdoor point-to-point wireless bridge |
| Supply Configuration |
Supplied as matched pair (2 units) |
| Power Supply Included |
Yes, 2 x PoE power supplies with AC cords |
| Intended Applications |
Wireless video security, network extension, outdoor point-to-point data transmission |
| Brand |
Hikvision |
Ideal Use Cases
Farm and Rural Property CCTV
The up to 5km quoted range makes this kit practical for connecting cameras on remote sheds, water tanks, gates, or outbuildings on large rural properties back to the main building NVR, where cable runs would require extensive trenching across paddocks.
Gate and Entry Camera Links
Connecting a camera or intercom at a property entrance to the main building network is a common application. The PoE output on the remote bridge unit can power a connected camera, reducing the number of separate power runs needed at the gate end.
Industrial Yard and Warehouse Perimeter
For cameras positioned at the far end of a large yard, loading dock, or external car park, the 867Mbps throughput provides sufficient bandwidth for HD video from multiple cameras connected at the remote bridge end via a PoE switch.
Detached Building Network Extension
Linking a workshop, studio, granny flat, or separate commercial tenancy to the main building’s network without running underground cable or fibre is a practical use of this bridge kit where the buildings have clear line of sight.
Temporary and Event CCTV Deployments
Where a camera needs to be deployed temporarily at a remote location without permanent cabling, the plug-and-play setup of the DS-3WF02-5AC/D allows the bridge pair to be installed and configured quickly, then relocated when the deployment ends.
Choosing the Right Model
- Choose this model if: You need to connect a remote camera or building to a main network across an open area with clear line of sight, and running Ethernet cable or fibre is not practical. The 867Mbps throughput and 5km quoted range suit larger properties, rural sites, and multi-camera remote positions.
- Choose a different model if: The wireless path between your 2 locations has significant obstructions such as trees, walls, or hillsides, as these will reduce performance below what this bridge kit can reliably deliver. In those situations, an underground Ethernet or fibre cable run is likely a more dependable solution. If you only need to connect a single device within a short distance of under 100m, a standard Ethernet cable run would be simpler and more cost-effective.
FAQs
- Does the DS-3WF02-5AC/D come as a complete kit with everything needed to set up the wireless link?
Yes. The kit includes 2 wireless bridge units, 2 PoE power supplies, 2 AC cords, a quick start guide, compliance information, and 4 binding tapes. This means you have the core hardware to power and mount both ends of the link without purchasing separate PoE injectors.
- What does the 5km transmission distance actually mean in a real installation?
The 5km figure is Hikvision’s specification under ideal, unobstructed clear line-of-sight conditions. In real installations, obstructions such as trees, fences, buildings, and vehicles can significantly reduce this range. Mounting both units at height with a clear sightline between them is strongly recommended. For shorter distances with partial obstructions, performance may still be acceptable, but the full 5km range should not be assumed without a site survey.
- Can I use the PoE output on the remote bridge unit to power an IP camera directly?
The DS-3WF02-5AC/D supports PoE input and output on each unit. In practice, this can allow a connected IP camera at the remote end to be powered through the bridge unit depending on the PoE budget and site design. Confirm the PoE power requirements of the camera you intend to connect before relying on this configuration.
- Is this a Wi-Fi extender or a wireless bridge, and what is the difference for CCTV use?
This is a wireless bridge, not a Wi-Fi extender. A Wi-Fi extender rebroadcasts a wireless signal for general device connectivity. A wireless bridge creates a fixed, dedicated point-to-point network link between 2 locations. For CCTV, this is the more appropriate approach because it provides a stable, consistent network path for video traffic rather than a shared general-purpose wireless network.
- What type of locations is the DS-3WF02-5AC/D most commonly used for?
Common installations include remote shed or barn cameras on farm properties, gate or driveway entry camera links, car park and industrial yard camera positions, and linking detached buildings to a main network. The kit is designed for outdoor point-to-point use where running Ethernet cable is difficult, costly, or disruptive.
- Does the 5GHz band cause any limitations I should be aware of?
The 5GHz band provides higher throughput and less interference than 2.4GHz, but 5GHz signals do not penetrate solid obstructions as well as lower frequency bands. This reinforces why clear line of sight between both bridge units is critical. If there are dense vegetation or structural obstructions in the wireless path, 5GHz performance will be affected more noticeably than a 2.4GHz link would be.
- Where can I get technical advice on whether this bridge kit suits my installation?
The DS-3WF02-5AC/D is part of the Security Wholesalers range, where the team can assist with compatibility questions and help determine whether a wireless bridge or an alternative cabling solution is the right approach for your specific site layout and camera requirements.
Cabling Considerations
- Cable Type: Standard Cat5e or Cat6 Ethernet cable is used between the PoE power supply and each bridge unit, and between each bridge unit and the connected network device at that end.
- Maximum Ethernet Cable Run: Standard Ethernet cable runs between the PoE power supply and the bridge unit should not exceed 100m per segment, in line with standard Ethernet distance limitations.
- PoE Considerations: Each bridge unit is powered by the included PoE power supply. The PoE output port on each bridge unit may also power a connected network device at that end, subject to the device’s PoE requirements and the bridge unit’s PoE output budget. Verify PoE compatibility before connecting cameras or other devices through the bridge PoE output.
- Wiring Tips: Use weatherproof cable entry points and outdoor-rated conduit where the Ethernet cable is exposed to the elements at the bridge mounting location. Ensure cables are properly secured and protected from UV exposure, water ingress, and physical damage, particularly on rural and industrial sites where conditions can be harsh.
Product Video Samples
Additional Information
No additional downloads available for this product.
