Product SKU: TP-Link VIGI Solar Kit SP9030 – 90W Panel & 30Ah/10.8V Lithium Battery with 4MP Outdoor Full-Colour 4G PT Network Camera
Product Overview
The TP-Link VIGI Solar Kit SP9030 – 90W Panel & 30Ah/10.8V Lithium Battery with 4MP Outdoor Full-Colour 4G PT Network Camera is an all-in-one, off-grid surveillance solution designed for remote or hard-to-wire sites. Combining the VIGI SP9030 intelligent solar power supply system with a 4 MP full-colour 4G pan/tilt camera, the kit delivers continuous, reliable operation using a high-efficiency 90 W photovoltaic panel and 30 Ah/10.8 V lithium battery. It is ideal for farms, construction and mining sites, rural driveways, boundary fences and off-grid properties where running mains power or data cables is costly or impractical.
- VIGI SP9030 solar power supply system (panel + battery + controller)
- 4 MP outdoor full-colour 4G pan/tilt camera (4 mm lens)
- Mounting accessories and waterproof cable attachments
- Quick Start Guide
- Power and connecting cables
Why Choose the TP-Link VIGI Solar Kit SP9030
The TP-Link VIGI Solar Kit SP9030 gives you a professionally matched solar power system and 4 MP full-colour 4G PT camera in a single, convenient package, making it easier to deploy high-quality security in locations with no fixed power or network. The intelligent 90 W solar panel and 30 Ah/10.8 V lithium battery with auxiliary heating keep the system running through nights, cold weather and extended cloudy periods, while the 4G camera provides flexible placement without Ethernet cabling. With IP66 weatherproof hardware, pan/tilt coverage, smart human/vehicle detection and remote management, this kit is a powerful choice for Australian farms, construction sites, remote gates, off-grid holiday homes and perimeter protection where reliability and simplicity matter.
Key Capabilities
Off-grid solar power for remote security
The kit’s 90 W monocrystalline solar panel and 30 Ah/10.8 V lithium battery supply continuous low-voltage power without relying on mains. This allows you to place the VIGI camera wherever coverage is needed most, including rural paddocks, temporary worksites and boundary fences. By eliminating trenching and fixed wiring, the SP9030 solar kit significantly reduces installation complexity and total project cost while still delivering dependable, professional-grade surveillance.
Built-in 4G connectivity for flexible deployment
The included 4 MP PT camera connects over 4G/LTE using a Nano-SIM, so no fixed Internet or Ethernet line is required at the site. This makes it ideal for locations beyond the reach of traditional broadband, such as remote farms, construction and mining camps, or off-grid properties. You can access live view, playback and smart notifications from virtually anywhere while keeping network infrastructure simple and avoiding the need for separate wireless bridge links.
Pan & tilt coverage with full-colour imaging
The 4G camera offers motorised pan and tilt, along with a fixed 4 mm lens that provides around 79° horizontal field of view. You can create presets and patrol routes to automatically scan key areas, while the camera’s full-colour capability and integrated white light help capture detailed, true-colour footage even at night. This combination greatly improves situational awareness, event verification and evidence quality compared with basic static infrared-only cameras.
Smart detection, human/vehicle classification & alerts
Smart analytics allow the camera to distinguish humans and vehicles from general motion, reducing false alarms from moving foliage, animals or shifting shadows. Advanced detection modes such as region intrusion and line crossing can be used to protect specific zones like gates, driveways or tool yards. When an event occurs, push notifications and alerts keep you informed in real time so you can quickly review footage and decide whether intervention is needed.
Remote management, statistics & system health
The VIGI SP9030 power system supports remote monitoring of battery status, load consumption and system performance, as well as functions like remote reboot and firmware updates. Combined with the camera’s cloud and app features, you can maintain, optimise and troubleshoot your off-grid installation without regular site visits. Over time, this reduces maintenance costs, improves uptime and helps ensure that both the power system and the 4G PT camera remain ready when critical events occur.
Key Features
-
High-efficiency 90 W solar panel: A Grade-A monocrystalline photovoltaic panel delivers efficient energy conversion and long service life, providing a solid power foundation for the attached 4G camera and any additional low-voltage devices. When combined with the adjustable mounting angles, it maximises daily energy harvest, supporting continuous recording and remote access even during periods of increased activity or cloud cover.
-
30 Ah/10.8 V lithium battery with intelligent heating: The integrated 30 Ah (31.2 Ah nominal) lithium battery offers substantial energy storage and is supported by intelligent auxiliary heating technology. This allows safe charging and discharging across a wide temperature range, helping maintain capacity in cold conditions while delivering more than 500 charge cycles. The result is reliable overnight runtime and consistent performance in diverse Australian climates.
-
IP66 weatherproof, outdoor-ready construction: Both the SP9030 power system and the 4G PT camera are built for harsh outdoor environments, with IP66 weather ratings that protect against dust, rain and spray. The robust housing and hardware are designed to withstand long-term exposure on poles, fences and structures, making the kit suitable for open paddocks, coastal regions, industrial yards and exposed construction sites where durability is essential.
-
4 MP full-colour 4G pan/tilt camera: The included VIGI C540-4G-style camera offers 2560 × 1440 resolution, a 4 mm F1.6 lens and advanced full-colour night performance using integrated white light illumination. With 360° monitoring via pan/tilt, human and vehicle classification, automatic tracking and two-way audio, it provides a highly capable front end for the solar kit, ideal for verifying events and interacting with people at remote locations.
-
Adjustable angles and modular design: The solar mounting structure supports manual angle adjustment at 5°/15°/25°/35°/45°/55°, allowing the panel to be optimised for local latitude and seasonal sun paths. The modular layout of the SP9030 makes it easier to service, upgrade or reconfigure components, while three DC outputs allow clean wiring to the camera and other compatible devices. This flexible architecture helps installers tailor the kit to a wide variety of sites and layouts.
-
Remote management, security alerts and simple installation: Smart management features provide power statistics, battery level display and remote reboot, while the camera offers smart detection, mobile notifications and secure remote access. The kit ships with waterproof cable accessories and mounting hardware, so installers can complete neat, professional jobs without extra accessories. Once mounted, a suitable data SIM and basic configuration are usually all that is required to bring the system online.
Specifications Summary
| Feature |
Specification |
| Solar Panel Power |
90 W monocrystalline photovoltaic panel |
| Battery Capacity |
Approx. 30–31.2 Ah lithium battery, 10.8 V nominal |
| Battery Features |
Intelligent auxiliary heating, >500 cycles, smart charging control |
| Angle Adjustment |
Manual 5° / 15° / 25° / 35° / 45° / 55° |
| DC Outputs |
Three DC outputs (two: 9–12.6 V DC up to 2 A, one: 12 V DC up to 2 A) |
| Camera Resolution |
4 MP (2560 × 1440) |
| Camera Lens & FOV |
4 mm fixed lens, approx. 79° horizontal field of view |
| DORI Distances (approx.) |
Detect ~80 m, Observe ~33 m, Recognise ~16 m, Identify ~8 m |
| Night Vision |
Full-colour with white light + IR, up to approx. 30 m |
| Connectivity |
4G/LTE mobile networking (Nano-SIM) for camera; 10/100 Mbps RJ45 on SP9030 |
| Weatherproof Rating |
IP66 for both solar power system and camera |
| Operating Temperature |
Approx. –30 °C to 60 °C (with intelligent auxiliary heating on SP9030) |
| Operating Humidity |
10%–90% RH, non-condensing |
| System Management |
Remote management, power statistics, low-battery alerts, remote reboot |
| Typical Applications |
Remote farms, construction/mining sites, off-grid homes, gates, boundary fences, car parks |
Ideal Use Cases
- Remote farms & rural properties – Ideal for monitoring gates, stock yards, sheds and water points where mains power and fixed Internet are unavailable. The solar kit and 4G PT camera provide wide coverage and smart alerts without running expensive underground cabling.
- Construction & mining sites – Suits temporary and semi-permanent projects that require surveillance only for the duration of the job. The system can be relocated as the site evolves, making it a flexible option for monitoring plant, materials, site entries and safety-critical areas.
- Holiday homes, cabins & off-grid retreats – Keeps an eye on remote dwellings when unoccupied, providing live view, recordings and notifications via 4G. The all-in-one solar kit reduces the need for permanent infrastructure while still delivering professional-grade off-grid security.
- Perimeters, boundary fences & driveways – Use pan/tilt control and presets to sweep long boundaries, fence lines or access roads. Smart detection and full-colour night imaging make it easier to identify people and vehicles approaching remote properties after dark.
FAQs
- What do I need to get the TP-Link VIGI Solar Kit SP9030 up and running?
The core components are included in the kit: the VIGI SP9030 solar power system, the 4 MP 4G PT camera, mounting hardware, waterproof cable accessories and cabling. In most cases you simply need a suitable data SIM for the camera, a sturdy pole or mounting surface, and access to the VIGI app or management platform for configuration. Once the panel and battery are installed, connect the DC output to the camera, insert the SIM, complete basic setup and the system will begin operating off-grid using solar energy.
- How many consecutive cloudy or rainy days can the kit handle?
Actual autonomy depends on camera settings, local weather and how much live viewing or recording is occurring, but the combination of a 90 W panel and 30 Ah/10.8 V lithium battery is designed to support typical surveillance loads through extended periods of poor weather. By optimising motion detection, recording schedules and resolution, you can extend runtime and reduce energy consumption. In practice, many installations can run through several overcast days without issue, especially when the panel is correctly angled and shading is minimised.
- Can I add more devices to the solar kit besides the included camera?
Yes, the SP9030 power system includes three DC outputs that can be used to power additional low-voltage devices, provided their combined load stays within the rated current and power limits. This might include a small wireless bridge, additional camera or auxiliary equipment. It is important to calculate total power consumption carefully to ensure there is sufficient solar and battery capacity. For best results, most users dedicate the kit primarily to the 4G PT camera and add other devices conservatively.
- Is professional installation recommended for this kit?
While technically skilled users may be able to install the kit themselves, professional installation is often recommended, particularly for elevated or exposed sites. A qualified installer can ensure the solar panel is safely mounted, oriented and angled correctly, cables are fully weatherproofed, and the camera is aimed and configured for optimum coverage. They can also advise on safe work practices, local regulations and ongoing maintenance, helping you get the most reliable performance from the TP-Link VIGI Solar Kit SP9030 over the long term.
Additional Information
Product Video Samples
NOTE: For best viewing quality, select 2160p resolution in YouTube’s settings.
TP-Link Warranty
TP-Link 3-Year Manufacturer Warranty
All TP-Link IP cameras and recording devices (NVRs/DVRs) are covered by a 3-year back-to-base manufacturer warranty.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the Competition and Consumer Act 2010 (Cth), and similar consumer protection laws and regulations may confer you with rights, warranties, guarantees, and remedies relating to the provision of goods or services to you by us via the Site which cannot be excluded, restricted, or modified. Our liability is governed solely by the ACL and these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or a refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties, and all material and work is provided to you without warranties of any kind, either express or implied. We expressly disclaim all warranties including but not limited to implied warranties of merchantability and fitness for a particular purpose.
(d) Manufacturer Warranties
Certain products, including particular models of TP-Link IP security cameras and DVR/NVR equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is in addition to but may overlap with any rights and remedies you may have under applicable law, including any Consumer Guarantees. If you are not considered a “consumer” within the meaning of the ACL, the manufacturer’s warranty may be your sole remedy. Many manufacturers’ warranties do not apply in a business or commercial setting. Please contact TP-Link if you would like to make a claim under the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please contact us and we will explain the requirements to you. This may include you providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind, unless approved by SecurityWholesalers at our discretion. If you are entitled to a refund, we will only provide it once evidence of the faulty product or reason is received by us, or once we have received the product at our warehouse and inspected it to assess whether it is eligible for a refund under these Terms. Any refund we make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been used, connected, installed, attempted to be connected or installed, or if your product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection to ensure that it is not damaged during return delivery to our warehouse. You are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If you damage products and then subsequently return them, you may be liable to pay to repair the product to its original condition. In these circumstances, where a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit
www.securitywholesalers.com.au/terms-and-conditions
