Product SKU: SBV-158G
Product Overview
Installers working with the Hanwha Wisenet PNV-9080R or XNV-x080x dome camera series will find the SBV-158G back box an essential mounting component for surface installations. Designed specifically to mate with these camera models, it provides a tidy housing for cable entry and termination at the mounting point, allowing cabling to be concealed rather than left exposed against the wall or ceiling surface. Built for use where recessed or in-ceiling conduit runs are not practical, the SBV-158G creates a clean, professional finish at the camera base. It is well suited to commercial installations on concrete, masonry, or plasterboard surfaces where a neat cable-management solution is required at the camera head itself. Compatibility is limited to the confirmed Hanwha Wisenet PNV-9080R and XNV-x080x series, so verifying your specific camera model before ordering is essential.
Key Capabilities
Confirmed Camera Compatibility
Engineered specifically to match the mounting footprint of the Hanwha Wisenet PNV-9080R and XNV-x080x dome camera series, ensuring correct mechanical alignment and a secure fit without modification or adaptation.
Cable Concealment at the Mount Point
The back box provides an enclosed cavity at the camera base, allowing network or power cabling to be routed and terminated internally. This eliminates exposed cabling runs against the mounting surface for a professional installation result.
Surface Mount Solution
Suitable for direct mounting onto flat wall or ceiling surfaces including concrete, masonry, and plasterboard, expanding installation options where recessed conduit access or in-ceiling cable paths are not available.
Clean Finished Appearance
By housing cable connections within the box body, the SBV-158G produces a neat camera installation that suits commercial environments where appearance at public-facing or client-visible locations is important.
Best For
- Surface-Mounted Dome Installations: Provides the mounting base and cable cavity needed when cameras are installed directly on flat walls or ceilings without access to in-wall conduit or recessed junction boxes.
- Commercial and Retail Environments: Delivers a tidy, professional finish at the camera mounting point in spaces where exposed cabling is not acceptable, such as lobbies, corridors, and retail floors.
- PNV-9080R and XNV-x080x Series Deployments: Directly compatible with these specific Hanwha Wisenet camera models, making it the correct accessory choice for installers working within these camera families.
Why Choose the SBV-158G
The SBV-158G is the manufacturer-specified back box for the Hanwha Wisenet PNV-9080R and XNV-x080x dome camera series, meaning fit, alignment, and cable access are designed to work with these cameras without improvisation. Using a generic back box or junction box with these cameras risks misalignment, poor sealing at the camera base, or a visually inconsistent finish. The SBV-158G ensures the camera sits flush and correctly positioned at the mount point while keeping cabling enclosed and protected. For installers who need a surface-mount option without exposed cabling, this is the purpose-built component for the job. Available at Security Wholesalers, the SBV-158G is a straightforward addition to any Hanwha Wisenet dome camera order where a surface-mount back box is required.
Buyer Decision Tips
Verify Your Camera Model Before Ordering: The SBV-158G is confirmed compatible with the PNV-9080R and XNV-x080x camera series only. If your camera model falls outside these families, confirm compatibility with the Hanwha Wisenet accessory documentation for your specific model before purchase, as back box mounting patterns vary across product lines.
Key Features & Technical Specifications
| Model |
SBV-158G |
| Brand |
Hanwha Wisenet |
| Product Type |
Back Box / Surface Mount Box |
| Compatible Camera Series |
PNV-9080R, XNV-x080x series |
| Primary Function |
Cable concealment and surface mounting base for compatible dome cameras |
| Mounting Surface |
Wall or ceiling surface mount |
| Category |
Hanwha Mounts and Accessories |
Ideal Use Cases
Corridor and Lobby Installations
Mounts compatible Hanwha dome cameras directly onto ceiling or wall surfaces in corridors and building lobbies with cabling kept out of sight inside the back box body.
Retail and Commercial Interiors
Provides a tidy, low-profile mounting solution for PNV-9080R or XNV-x080x cameras in retail environments where a professional finish is expected at camera locations visible to staff and customers.
Concrete and Masonry Surfaces
Designed for surface mounting on hard substrates where cutting into the wall for cable concealment is not practical, giving installers a clean solution without structural modification.
Hanwha Wisenet System Builds
Purpose-built for the PNV-9080R and XNV-x080x camera families, making it the correct accessory to specify when completing a Hanwha Wisenet installation that requires surface-mounted dome camera positions.
Choosing the Right Model
- Choose this model if: You are installing a Hanwha Wisenet PNV-9080R or XNV-x080x series dome camera on a flat wall or ceiling surface and need a manufacturer-matched back box for cable concealment and a clean mounting finish.
- Choose a different model if: Your camera model falls outside the PNV-9080R or XNV-x080x series. Back box mounting patterns differ across Hanwha Wisenet product lines, so confirm the correct accessory code for your specific camera using Hanwha’s accessory compatibility documentation before ordering.
FAQs
- Which cameras is the SBV-158G confirmed compatible with?
The SBV-158G is confirmed compatible with the Hanwha Wisenet PNV-9080R and XNV-x080x dome camera series. If you are working with a camera model outside these families, check Hanwha’s accessory documentation to confirm the correct back box for your specific model before purchasing.
- What is the purpose of a back box for a dome camera installation?
A back box mounts to the wall or ceiling surface ahead of the camera and provides an enclosed cavity where network or power cabling can be terminated and stored. This keeps cabling concealed at the mounting point rather than running exposed along the surface, resulting in a neater and more professional installation finish.
- Can the SBV-158G be used on both walls and ceilings?
The SBV-158G is a surface mount back box suitable for installation on flat wall or ceiling surfaces. It is intended for use where recessed or in-ceiling cable access is not available, providing a surface-mounted solution for compatible Hanwha dome cameras on either orientation.
- Does the SBV-158G include the camera or any cabling?
No. The SBV-158G is a mounting accessory only. It does not include a camera, cabling, or any network or power components. It is purchased separately as an add-on to the compatible Hanwha Wisenet camera. Camera and cabling must be sourced independently.
- Where can I purchase the SBV-158G in Australia?
The SBV-158G is part of the Security Wholesalers range of Hanwha Wisenet mounts and accessories, available for trade and installer purchase alongside the compatible PNV-9080R and XNV-x080x camera series. Contact Security Wholesalers directly for current stock and pricing.
Additional Information
No additional downloads available for this product.
