Ruijie RG-PA1000I-P-F 1000W AC/HVDC Power Module with 56V DC Output, 740W PoE Power, RG-S5310 Series Switch Compatibility‍‌​​‌​​​‌‌​‌‌‌​‌‌​​‍

Product SKU: RG-PA1000I-P-F

Product Overview

The Ruijie RG-PA1000I-P-F is a 1000W AC/HVDC power module designed for selected Ruijie PoE switches that need a high-capacity internal power supply for access-layer networking. It provides 56V DC output and a 740W PoE power budget, making it suitable for installations with multiple PoE-powered devices such as wireless access points, IP cameras, intercoms and other network edge equipment. This Ruijie RG-PA1000I-P-F power module is best suited to professional network upgrades, replacement power supply requirements, or switch deployments where PoE load planning matters. Its compatibility with RG-S5310 series switches, along with selected RG-S5760-X, RG-CS83, RG-CS85 and RG-CS86 PoE models, makes it a practical choice when matching the correct power module to supported Ruijie hardware.

Key Capabilities

Best For

• Ruijie PoE Switch Upgrades: Suitable for selected compatible Ruijie switches where a 1000W power module and 740W PoE budget are required.
• High PoE Device Loads: Useful for networks powering multiple access points, IP cameras, intercoms or edge devices from the switch.
• Professional Rack Installations: A good fit for structured network cabinets where airflow direction and supported switch compatibility must be planned correctly.
• Replacement Power Module Needs: Appropriate when replacing a compatible Ruijie switch power supply module with the same supported model.

Why Choose the RG-PA1000I-P-F

Choose the RG-PA1000I-P-F when the main requirement is PoE power capacity rather than simply keeping the switch powered on. The key advantage is the 740W PoE power budget, which gives supported Ruijie switches more practical headroom for multi-device deployments than lower-capacity power modules. For installers, that can reduce the risk of running out of PoE budget as more access points, cameras or edge devices are added. This model, supplied by Security Wholesalers, is also useful when standardising supported Ruijie switch hardware across business, education, retail or building network environments where compatible power modules need to be matched accurately.

Buyer Decision Tips

Key Features & Technical Specifications

Ideal Use Cases

Choosing the Right Model

• Choose this model if: Your compatible Ruijie PoE switch requires a 1000W power module with a 740W PoE power budget.
• Choose a lower-capacity model if: Your switch supports it and your connected PoE devices require a much smaller total PoE budget.
• Check before purchase: Match the module to the exact switch model and confirm whether the site’s input power and rack airflow direction suit the installation.

FAQs

1. Is the RG-PA1000I-P-F suitable for all Ruijie switches?
   No. The RG-PA1000I-P-F should only be used with compatible Ruijie switch models and series. It is commonly matched with RG-S5310-24GT4XS-P-E and RG-S5310-48GT4XS-P-E, as well as selected RG-S5760-X, RG-CS83, RG-CS85 and RG-CS86 PoE models. Always confirm the exact switch model before purchasing.
2. How much PoE power does the RG-PA1000I-P-F provide?
   The RG-PA1000I-P-F provides a 740W PoE power budget. This matters when a compatible switch is powering multiple PoE devices such as access points, IP cameras or intercoms. The total connected device load should be calculated before installation, rather than assuming every switch port can run at maximum PoE output at the same time.
3. What is the difference between total power and PoE power on this module?
   The module’s total output power can reach 1000W under the supported higher input voltage range, while the PoE power budget is 740W. For buyers, the PoE figure is the more important number when planning how many powered network devices the switch can support.
4. Can the RG-PA1000I-P-F be used for IP camera networks?
   Yes, when installed in a compatible Ruijie PoE switch, the RG-PA1000I-P-F can support IP camera networks where the switch supplies power over Ethernet. It is especially useful when the installation has several cameras, but the total PoE load must still be checked against the available 740W PoE budget.
5. Does the RG-PA1000I-P-F support HVDC input?
   Yes. The RG-PA1000I-P-F supports AC input and 240V DC HVDC input. This can be useful in certain enterprise or infrastructure environments, but the final installation should still be checked by a qualified technician to confirm power compatibility, electrical requirements and the supported switch configuration.
6. What should I check before buying the RG-PA1000I-P-F?
   Before buying the RG-PA1000I-P-F, check the exact switch model, total PoE load, input power environment and airflow direction. This model is available through Security Wholesalers for suitable Ruijie switch installations, but the key buying step is confirming compatibility rather than selecting based on wattage alone.

Additional Information

Ruijie RG-PA1000I-P-F Power Model Datasheet (V1.1)