Product SKU: DS-PDEB1-EG2-WB-B
Product Overview
The Hikvision DS-PDEB1-EG2-WB-B is a black AX PRO single-button wireless emergency button designed to provide a simple fixed emergency trigger within homes, offices, healthcare environments and other protected premises. Using Hikvision Tri-X two-way wireless technology at 433 MHz, it provides AES-128 encrypted communication, frequency hopping and a free-space transmission range of up to 800 metres. The wall-mounted unit can be configured for panic or medical alarm operation and supports remote configuration through the compatible AX PRO environment. Front and rear tamper protection help detect interference with the device, while IP66 protection makes the updated design suitable for humid indoor environments. Powered by a replaceable CR2450 battery with up to three years of standard standby life, it provides a compact emergency solution without requiring signal or power cabling back to the alarm panel.
Key Capabilities
Single-Button Emergency Operation
The dedicated emergency button provides a straightforward way to trigger an alarm without navigating a keypad or mobile application. Within the supported AX PRO configuration it can be used as a panic alarm or configured for medical emergency operation.
Tri-X Two-Way Wireless
Hikvision Tri-X wireless communication provides two-way RF transmission at 433 MHz with AES-128 encryption. Frequency hopping helps improve resilience against wireless interference and jamming in a correctly designed AX PRO alarm installation.
Up to 800 m Wireless Range
The emergency button has a specified transmission range of up to 800 metres in free space. Signal-strength indication helps installers assess the selected mounting position before commissioning the device within the AX PRO wireless network.
Front & Rear Tamper Protection
Front and rear tamper protection can alert the alarm system if the unit is opened or removed from its mounting position, helping protect the integrity of a fixed emergency button installed in an accessible location.
IP66 Water-Resistant Design
The updated emergency-button design carries an IP66 rating and is specifically described for humid indoor environments. This provides greater resistance to moisture than a conventional basic indoor panic button while retaining a compact wall-mounted format.
Up to 3 Years Battery Life
A single replaceable CR2450 3 V battery powers the device, with Hikvision specifying up to three years of standard standby life. Battery status can be monitored through the supported AX PRO system to assist with planned maintenance.
Best For
- Homes: Provides a fixed emergency trigger in bedrooms, living areas or other accessible locations connected to an AX PRO system.
- Medical or assistance applications: Can be configured as a medical alarm where a wall-mounted emergency call point is required.
- Offices and reception areas: Gives staff a dedicated emergency alarm button without requiring access to the main alarm keypad.
- Humid indoor environments: IP66 protection makes the updated design useful where increased resistance to moisture is desirable.
Why Choose the DS-PDEB1-EG2-WB-B
The DS-PDEB1-EG2-WB-B provides a simple way to add a dedicated emergency trigger to a compatible AX PRO alarm system without running additional alarm wiring. Its single-button layout keeps operation straightforward, while encrypted Tri-X communication, frequency hopping and an 800 metre free-space range provide the wireless foundation required for professional deployment. Front and rear tamper protection, IP66 water resistance and battery-status monitoring add practical reliability for a permanently mounted device. Supplied by Security Wholesalers, the black version is particularly useful where a discreet dark-coloured emergency button is preferred and the installation requires remote configuration, flexible enrolment and long battery-powered operation.
Buyer Decision Tips
Buyer Tip: This is the single-button wall-mounted version. If the application requires two buttons to be pressed together to reduce accidental activation, select the compatible dual-button emergency model instead.
Buyer Tip: The published 800 metre range is measured in free space. Walls, reinforced concrete, metal structures and radio interference can substantially reduce real-world range, so perform a signal-strength test at the intended mounting position before final installation.
Key Features & Technical Specifications
| Product |
AX PRO wireless single-button emergency button. |
| Model |
DS-PDEB1-EG2-WB(B) / black variant. |
| Button Configuration |
1 emergency button. |
| Alarm Functions |
Panic alarm or configurable medical alarm. |
| Wireless Technology |
Hikvision Tri-X Wireless. |
| Transmission Method |
Two-way RF wireless. |
| Transmission Frequency |
433 MHz. |
| Transmission Security |
AES-128 encryption. |
| Frequency Hopping |
Supported. |
| Wireless Range |
Up to 800 m in free space. |
| Tamper Protection |
Front and rear. |
| Signal Strength Indicator |
Supported. |
| Temperature Status |
Environment temperature indication supported. |
| Enrolment Methods |
Power-up, remote ID and QR code. |
| Remote Configuration |
Supported through the compatible AX PRO application environment. |
| Power Supply |
Battery powered. |
| Battery |
1 × CR2450, 3 V. |
| Standard Battery Life |
Up to 3 years standby. |
| Protection Rating |
IP66. |
| Operating Temperature |
-10°C to 55°C. |
| Storage Temperature |
-20°C to 60°C. |
| Operating Humidity |
10% to 90%. |
| Mounting Method |
Wall mount. |
| Application Environment |
Indoor use, particularly humid environments. |
| Dimensions |
63.8 × 63.8 × 18.4 mm. |
| Weight |
Approximately 57.5 g. |
Ideal Use Cases
Bedroom Emergency Point
Install in an accessible fixed position where a resident can quickly trigger an AX PRO emergency or medical alarm.
Reception & Front Desk
Provide staff with a discreet dedicated alarm trigger without requiring them to reach the main security keypad during an incident.
Medical Assistance Locations
Configure the device for medical-alarm operation where a fixed single-button assistance point is required within the AX PRO system.
Humid Indoor Areas
The IP66-rated design provides additional moisture resistance for suitable indoor locations where conventional non-waterproof alarm buttons may be less appropriate.
Choosing the Right Model
- Choose the DS-PDEB1-EG2-WB(B) if: You need a fixed wall-mounted AX PRO emergency device with one button, IP66 protection, tamper detection and long-range Tri-X wireless communication.
- Choose the DS-PDEB2-EG2-WB(B) if: The application requires a dual-button emergency device where both buttons can be used together to reduce accidental activation.
- Choose a portable emergency button if: The user needs to carry the emergency trigger rather than having it permanently fixed to a wall.
FAQs
- What is the Hikvision DS-PDEB1-EG2-WB(B) used for?
The Hikvision DS-PDEB1-EG2-WB(B) is a single-button wireless emergency device for the AX PRO alarm system. Pressing the button can trigger an emergency alarm, and the device can also be configured as a medical alarm through the supported AX PRO client environment. Its wall-mounted design is intended for fixed locations where a simple, clearly accessible emergency trigger is required.
- What wireless technology does the DS-PDEB1-EG2-WB(B) use?
The emergency button uses Hikvision Tri-X two-way RF wireless technology on 433 MHz, with AES-128 encryption and frequency hopping for more reliable transmission. Hikvision specifies a free-space wireless range of up to 800 metres. Real installation range can be reduced by walls, metal structures, interference and the position of the AX PRO hub.
- Is the DS-PDEB1-EG2-WB(B) waterproof?
Hikvision rates the DS-PDEB1-EG2-WB(B) to IP66 and describes it as suitable for humid indoor environments. The updated design improves resistance to water and moisture compared with a basic indoor panic button, but the published application scenario remains indoor use, especially humid environments. Installation should therefore follow Hikvision’s stated environmental guidance rather than treating it as a general outdoor emergency button.
- How long does the battery last in the DS-PDEB1-EG2-WB(B)?
The unit is powered by one CR2450 3 V battery, with Hikvision specifying a standard standby battery life of up to three years. Actual service life can vary with wireless conditions, polling behaviour, alarm activity, temperature and battery quality. Battery status can be monitored through the supported AX PRO system so replacement can be planned before the device becomes unavailable.
- Does the DS-PDEB1-EG2-WB(B) have tamper protection?
Yes. Hikvision specifies front and rear tamper protection. This allows the alarm system to detect unauthorised opening or removal of the wall-mounted device when the tamper function is correctly enrolled and configured. Tamper protection is especially useful for fixed emergency buttons because it helps distinguish legitimate emergency operation from physical interference with the device.
- How is the DS-PDEB1-EG2-WB(B) enrolled into AX PRO?
Hikvision supports several enrolment methods, including power-up enrolment, remote ID and QR-code enrolment. The device is also fully remotely configurable through the supported app environment. Signal-strength indication is provided to help the installer confirm that the selected wall position has an appropriate wireless connection before commissioning the emergency button.
- What operating conditions does the DS-PDEB1-EG2-WB(B) support?
The emergency button is specified for operation from -10°C to 55°C with 10% to 90% operating humidity, and storage from -20°C to 60°C. Its dimensions are approximately 63.8 × 63.8 × 18.4 mm and its weight is about 57.5 g. The published application scenario is indoor use, particularly humid environments.
- Who should choose the Hikvision DS-PDEB1-EG2-WB(B)?
Choose the DS-PDEB1-EG2-WB(B) when an AX PRO installation needs a fixed, wall-mounted single emergency button with encrypted two-way wireless communication, tamper protection, IP66 water resistance and up to 800 metres of free-space range. When selecting it through Security Wholesalers, confirm the AX PRO hub frequency and the required alarm behaviour, such as panic or medical alarm, before commissioning.
Additional Information
Hikvision DS-PDEB1-EG2-WB-B_Datasheet
