Product Overview
Surface mounting an access control terminal cleanly depends on having the right back box for the job, and the DS-KAB502-S2 is the purpose-matched wall mounting box for compatible Hikvision DS-K1T502 series terminals. Built from SECC steel construction, this accessory provides a stable, structured mounting base when installing terminals on finished wall surfaces where recessing is not practical. Measuring 176 x 80 x 22.8mm and weighing approximately 145.1g, it keeps the terminal installation compact and low-profile while helping manage cable entry behind the unit. It is suited to offices, apartment entry points, retail staff doors, warehouse access control areas, and commercial fit-outs where a tidy terminal presentation matters. Installers who need a compatible, purpose-built mounting solution rather than a generic back box will find this accessory simplifies the installation and improves the finished result.
Key Capabilities
DS-K1T502 Series Compatibility
Purpose-matched for compatible Hikvision DS-K1T502 series access terminals, this wall box removes the guesswork of selecting a universal back box and ensures the mounting footprint aligns correctly with the terminal during installation.
SECC Steel Construction
Built from electrolytic zinc-coated cold-rolled steel (SECC), this mounting box provides a durable, corrosion-resistant base suited to professional access control installations in commercial and multi-residential environments.
Surface Mount Installation
Designed for surface-mounted deployment where recessing the terminal into the wall is not possible or preferred, the DS-KAB502-S2 creates a neat and stable wall-mounted finish without the need for custom fabrication.
Cable Entry Management
The wall box provides structured space behind the terminal for cable routing, helping installers achieve a cleaner cable entry and a more serviceable finish compared to mounting the terminal directly to an unfinished surface.
Compact Low-Profile Footprint
At 176 x 80 x 22.8mm and approximately 145.1g, the mounting box adds minimal bulk to the installation and suits narrow wall areas, corridor access points, and entry doors where space around the terminal is limited.
Best For
- DS-K1T502 Series Terminal Installations: The primary application for this accessory is surface mounting compatible Hikvision DS-K1T502 series terminals at wall-mounted access control points.
- Office and Commercial Entry Doors: Suited to staff access points, reception entries, and internal controlled doors in commercial buildings where a neat wall-mounted terminal presentation is required.
- Apartment and Strata Access Points: Practical for shared entry locations on finished walls where the terminal cannot be recessed and a tidy back box improves the overall installation quality.
- Retail, Warehouse, and Back-of-House Areas: Useful for storerooms, staff-only access doors, and warehouse entry control points where the terminal needs a secure and organised wall-mounted base.
Why Choose the DS-KAB502-S2
The DS-KAB502-S2 solves a common installation challenge: mounting a DS-K1T502 series terminal cleanly on a surface where recessing is not possible. Rather than using a generic back box that may not align with the terminal’s fixing points, this wall mounting box is designed specifically for compatible DS-K1T502 series units, reducing fitting complications and producing a more professional result. The SECC steel build adds durability suited to a commercial access control environment, and the compact 176 x 80 x 22.8mm profile keeps the installation tidy in confined entry areas. For access control projects sourced through Security Wholesalers, this accessory is best ordered alongside the terminal so the installer can verify the wall surface, cable path, and available mounting depth before attending site.
Buyer Decision Tips
Compatibility Tip: This wall mounting box is designed for compatible DS-K1T502 series terminals only. Confirm the exact terminal model before ordering, as the DS-KAB502-S2 should not be treated as a universal back box for all Hikvision access control terminals. Also check whether the terminal packaging already includes basic mounting hardware to avoid ordering duplicate accessories.
Accessory Selection Tip: If your installation requires additional physical cover or weather protection around the terminal rather than just a mounting base, check whether the DS-KAB502-S1 protective shield is more appropriate for the site conditions. The two accessories serve different purposes and may be used together or independently depending on the installation requirements.
Key Features & Technical Specifications
| Model |
DS-KAB502-S2 |
| Product Type |
Wall mounting box / surface mount back box for access control terminal |
| Compatible Series |
Hikvision DS-K1T502 series terminals |
| Installation Type |
Surface mount / wall mount |
| Material / Construction |
SECC (electrolytic zinc-coated cold-rolled steel) |
| Dimensions |
176 x 80 x 22.8mm |
| Weight |
Approx. 145.1g |
| Primary Function |
Provides a structured surface-mount base for compatible DS-K1T502 series terminals |
| Cable Management |
Provides space and structure behind terminal for cable entry and routing |
| Typical Applications |
Offices, apartment entries, retail staff doors, warehouses, commercial access control fit-outs |
| Installation Note |
Confirm DS-K1T502 series compatibility, wall surface, cable path, and mounting depth before installation |
| Related Accessory |
DS-KAB502-S1 protective shield for DS-K1T502 series terminals |
Ideal Use Cases
Office Entry Doors
Where a DS-K1T502 series terminal is installed at a staff door or reception entry, the DS-KAB502-S2 provides a structured surface-mount base that creates a more integrated and professional finished appearance.
Apartment and Strata Access Points
Shared entry points with finished wall surfaces benefit from the compact 176 x 80 x 22.8mm footprint, which keeps the terminal installation tidy without protruding significantly from the wall.
Retail Back-of-House Areas
For storeroom doors and staff-only access points in retail environments, this wall box provides a secure mounting solution for the terminal with organised cable management behind the unit.
Warehouse Access Control
Internal access doors in warehouse and logistics environments benefit from the SECC steel build, which suits commercial installation conditions and provides a stable base for the terminal.
Commercial Fit-Outs
Security integrators completing multi-site or staged commercial projects can use this accessory to standardise surface-mount terminal installations across locations using compatible DS-K1T502 series hardware.
Choosing the Right Model
- Choose this model if: You are installing a compatible Hikvision DS-K1T502 series terminal on a surface-mounted wall location and need a purpose-matched back box to achieve a clean, professional finish.
- Choose a different accessory if: Your terminal is from a different Hikvision access control series, you need a protective shield rather than a mounting box, or the installation requires a sealed outdoor enclosure with weather protection rather than a surface-mount back box.
- Check before ordering: Confirm the exact terminal model is DS-K1T502 series, check whether the terminal packaging already includes mounting hardware, and verify the available wall depth, cable entry position, and surface type before ordering this accessory separately.
FAQs
- What does the DS-KAB502-S2 do?
The DS-KAB502-S2 is a wall mounting box that provides a surface-mount base for compatible Hikvision DS-K1T502 series access control terminals. It helps conceal cable entry and creates a more finished installation when the terminal cannot be recessed into the wall.
- Which terminals is the DS-KAB502-S2 compatible with?
The DS-KAB502-S2 is designed for use with compatible Hikvision DS-K1T502 series terminals. It is not a universal back box and should not be used with terminals from other Hikvision access control series without confirming compatibility first.
- What are the dimensions and weight of the DS-KAB502-S2?
The DS-KAB502-S2 measures 176 x 80 x 22.8mm and weighs approximately 145.1g. These dimensions make it a low-profile accessory suited to narrow entry walls, corridor doors, and finished wall surfaces where a compact mounting base is needed.
- What material is the DS-KAB502-S2 made from?
The DS-KAB502-S2 is constructed from SECC, which is electrolytic zinc-coated cold-rolled steel. This provides a durable, corrosion-resistant build appropriate for professional access control environments including offices, commercial buildings, and multi-residential entry points.
- What is the difference between the DS-KAB502-S2 and the DS-KAB502-S1?
The DS-KAB502-S2 is a wall mounting box that supports surface-mounted installation of the terminal. The DS-KAB502-S1 is a protective shield designed to provide additional cover around the terminal. They serve different purposes and the correct accessory depends on the specific installation requirements for the site.
- Can the DS-KAB502-S2 be used outdoors?
The DS-KAB502-S2 is a surface mounting accessory rather than a sealed outdoor enclosure. If the terminal is being installed in an exposed outdoor location, the site’s weather exposure, terminal IP rating, and cable sealing requirements should all be confirmed before selecting this accessory for the installation.
- Should I check whether the terminal already includes mounting hardware before ordering the DS-KAB502-S2?
Yes. Some DS-K1T502 series terminal packages may include basic mounting hardware or a bracket. Checking the terminal’s packaging contents before ordering the DS-KAB502-S2 separately is recommended to avoid purchasing accessories that duplicate what has already been supplied. This product is available through Security Wholesalers alongside the compatible terminal range for straightforward project sourcing.
Cabling Considerations
- Cable Entry Planning: Identify the cable entry position on the wall before fixing the DS-KAB502-S2. The wall box provides space behind the terminal for cable routing, and planning entry alignment before installation reduces the need for rework.
- Cable Type: Cable type is determined by the DS-K1T502 series terminal requirements for power, data, and door control connections. Refer to the terminal datasheet and the site’s access control system specifications for the correct cable types and conductor counts.
- Cable Slack: Leave sufficient cable slack behind the wall box to allow the terminal to be removed from the mounting for servicing or programming without disconnecting wiring. Approximately 150-200mm of slack is a practical guideline for most access terminal installations.
- Wiring Tips: Confirm cable dressing and conduit or sleeve routing before fixing the wall box permanently. Once the terminal is mounted, access to cable connections is limited, so all wiring should be terminated and tested before the terminal is secured to the DS-KAB502-S2.
Additional Information
