Product Overview
Designed for building entry points where a door station needs a stronger, more professional surface-mount finish, the Hikvision DS-KAB13-D is a stainless steel protective shield built to support compatible DS-KD3003 series door station installations. Constructed from SUS304 stainless steel, it provides a durable housing shell that gives the intercom a finished appearance while helping to protect the hardware from physical contact at high-traffic entry locations. Measuring 360 x 128 x 86mm, the DS-KAB13-D suits surface-mounted intercom setups at apartment entries, commercial reception doors, strata access points and controlled building entry locations. It is particularly useful where recessing the door station into a wall is not practical, and where a basic exposed mounting arrangement would not meet the durability or finish standards required for the site.
Key Capabilities
SUS304 Stainless Steel Construction
SUS304 stainless steel gives the DS-KAB13-D a durable and corrosion-resistant finish suited to entry environments where the intercom housing is exposed to regular contact, weather influence and daily foot traffic.
DS-KD3003 Series Compatibility
The shield is designed specifically for DS-KD3003 door station mounting applications, with listed compatibility also covering DS-KD3002-VM, DS-KD3002-VM/Analog and DS-KD3003-E6, giving installers a clear reference for supported configurations.
Surface-Mount Protective Housing
Rather than leaving the door station hardware exposed on a flat wall, the shield provides a defined mounting enclosure that improves both the protection and the visual finish of the installed intercom at building entry points.
Wide Working Temperature Range
A listed working temperature range of -40°C to 70°C makes the DS-KAB13-D a practical accessory for Australian entry environments, from sheltered indoor foyers to semi-exposed outdoor doorways subject to temperature variation.
Professional Entry Finish
At shared building entries, apartment foyers and commercial reception doors, the stainless steel shield helps the intercom installation look considered and complete rather than an afterthought bolt-on to the wall face.
Best For
- Apartment and Strata Entries: Suited to shared residential entry points where a compatible DS-KD3003 door station needs a neat stainless steel housing for daily use by multiple residents.
- Commercial Building Access Points: Practical for reception doors, staff entry gates and controlled access doors where the intercom installation needs to withstand frequent contact and maintain a professional appearance.
- Surface-Mount Intercom Projects: A useful accessory when recessing the door station into the wall is not possible or not preferred, giving the installation a cleaner result than an exposed surface mount.
- Exposed or Semi-Outdoor Entries: The SUS304 stainless steel construction and wide temperature rating make it suitable for entry points that are partially exposed to outdoor conditions or subject to temperature extremes.
Why Choose the DS-KAB13-D
When a DS-KD3003 series door station is being surface-mounted at a shared or high-traffic entry, leaving the hardware exposed on a flat wall surface is rarely the right outcome. The DS-KAB13-D addresses this by providing a dedicated SUS304 stainless steel protective shield that gives the intercom a proper enclosure, a cleaner visual result and improved durability at the mounting point. The 360 x 128 x 86mm form factor is sized for compatible door station configurations, and the wide operating temperature range of -40°C to 70°C means it holds up across a variety of Australian entry environments without material compromise. Unlike a basic mounting plate, the shield adds physical depth and structure to the installation. For intercom projects sourced through Security Wholesalers, this accessory is best confirmed and ordered alongside the door station to ensure compatibility and cable routing are planned correctly from the start.
Buyer Decision Tips
Compatibility Tip: The DS-KAB13-D is designed for DS-KD3003 series door station mounting applications and listed compatible accessories including DS-KD3002-VM, DS-KD3002-VM/Analog and DS-KD3003-E6. It is not a universal shield for all Hikvision video intercom products. Confirm the exact door station model before ordering to avoid a mismatch at installation.
Installation Tip: Before installing the shield, confirm the mounting height, wall surface type, cable entry direction and whether the installation location requires weather sealing around the perimeter. The DS-KAB13-D has no insulation, so the cable protection and sealing approach used by the installer determines how well the overall installation performs in outdoor or semi-exposed conditions.
Key Features & Technical Specifications
| Model |
DS-KAB13-D |
| Product Type |
Video intercom protective shield and surface mounting accessory |
| Primary Function |
Protective mounting housing for compatible Hikvision door station installations |
| Compatible Series |
Designed for DS-KD3003 door station mounting applications |
| Listed Compatible Accessories |
DS-KD3002-VM, DS-KD3002-VM/Analog, DS-KD3003-E6 |
| Material |
SUS304 stainless steel |
| Insulation |
No insulation |
| Working Temperature |
-40°C to 70°C |
| Dimensions |
360 x 128 x 86mm |
| Installation Method |
Surface mounting with protective shield enclosure for compatible door station hardware |
| Typical Applications |
Apartment entries, commercial access points, strata building doors, reception entries, semi-outdoor entry locations |
| Key Installation Consideration |
Confirm door station model compatibility, wall surface, cable routing direction and sealing before installation |
Ideal Use Cases
Apartment Building Entries
At shared residential entry points, the stainless steel shield provides a durable and professional finish for compatible DS-KD3003 door station hardware used by multiple residents daily.
Commercial Reception and Staff Doors
Business entry points with heavy daily use benefit from the SUS304 stainless steel construction, which resists surface wear and keeps the intercom installation looking intact over time.
Strata and Multi-Tenant Sites
Common area intercoms at strata properties see frequent contact from residents, delivery personnel and visitors. The protective shield helps absorb that physical use without affecting the door station hardware beneath.
Semi-Exposed Outdoor Entries
Where a door station is mounted in a sheltered but non-indoor position, the DS-KAB13-D’s wide working temperature range of -40°C to 70°C supports use in entry environments subject to temperature variation.
Choosing the Right Model
- Choose this model if: You are surface-mounting a compatible DS-KD3003 series door station and need a SUS304 stainless steel protective shield that improves the durability and finish of the installation at a building entry point.
- Choose a different bracket if: Your door station is from a different Hikvision modular series, requires a flush or recessed mounting format, uses a different module count or enclosure size, or needs a mounting accessory with built-in weatherproofing or insulation.
- Check before ordering: Confirm the exact door station model, module configuration, wall surface type, cable entry direction and whether the shield dimensions suit the planned mounting location before placing the order.
FAQs
- What does the DS-KAB13-D do?
The DS-KAB13-D is a stainless steel protective shield designed to surface-mount compatible Hikvision door station hardware at building entry points. It gives the intercom a defined enclosure and a more finished installation result than an exposed wall mount, while helping to protect the door station from physical contact at high-traffic entries.
- Which Hikvision door stations is the DS-KAB13-D compatible with?
The DS-KAB13-D is designed for DS-KD3003 door station mounting applications. Listed compatible accessories include DS-KD3002-VM, DS-KD3002-VM/Analog and DS-KD3003-E6. Installers should verify the exact door station model and module configuration against this accessory before ordering.
- What material is the DS-KAB13-D made from, and why does it matter?
The DS-KAB13-D is constructed from SUS304 stainless steel. This grade of stainless steel is commonly used in entry hardware and commercial fixtures because it provides good corrosion resistance, surface durability and a professional finish suited to visible, high-contact locations such as apartment foyers and commercial building entrances.
- What are the dimensions of the DS-KAB13-D?
The DS-KAB13-D measures 360 x 128 x 86mm. These dimensions should be checked against the planned wall mounting location, the cable entry point, the door station module layout and any surrounding wall features before the installation is planned.
- Does the DS-KAB13-D include insulation or weatherproofing?
No. The DS-KAB13-D is listed with no insulation. It is a stainless steel protective mounting shield rather than a sealed enclosure. Installers working on outdoor or semi-exposed entry locations need to manage cable sealing and weatherproofing as part of the broader installation design, separate to this accessory.
- Can the DS-KAB13-D be used in outdoor entry locations?
The DS-KAB13-D has a working temperature range of -40°C to 70°C and uses stainless steel construction, making it suitable for a range of Australian entry environments including sheltered outdoor positions. For outdoor installations sourced through Security Wholesalers, confirm the site exposure level, cable sealing approach and compatible door station IP rating before finalising the installation design.
- Is this shield suitable for all Hikvision video intercom products?
No. The DS-KAB13-D is specifically designed for DS-KD3003 series door station installations and the listed compatible accessories. It should not be treated as a universal mounting shield for all Hikvision video intercom or access control products. Compatibility must be confirmed against the exact door station model and module configuration used in the project.
Cabling Considerations
- Cable Type: Cabling for the door station installation typically uses Cat5e or Cat6 network cable routed to the compatible DS-KD3003 series door station. Confirm the cable type and routing with the door station specification before installation.
- Cable Entry Planning: Plan the cable entry point through the wall before fixing the DS-KAB13-D shield. The 360 x 128 x 86mm form factor means cable routing direction and entry position must be confirmed at the planning stage to avoid obstruction once the shield is fixed to the wall.
- No Electrical Connections in Shield: The DS-KAB13-D itself has no electrical connections. All wiring connects directly to the compatible door station hardware housed within the shield. The shield is a mechanical mounting accessory only.
- Sealing at Cable Entry: Where the shield is used in a semi-outdoor or exposed entry position, the cable entry point through the wall should be sealed appropriately by the installer. The shield has no built-in insulation or weatherproofing, so sealing is the installer’s responsibility as part of the broader installation design.
Additional Information
