Product Overview
Built for small-scale residential and commercial installations, the DS-7604NI-M1/4P is a compact 4-channel PoE NVR that arrives ready to record straight out of the box, with a 4TB surveillance-grade hard drive already installed. Featuring the same version 4 graphical interface found in Hikvision’s I-Series recorders, this unit delivers improved navigation, live view layout, and playback controls without the I-Series price point. Equipped with 4 independent PoE ports, it powers and connects cameras over a single cable run, removing the need for separate power supplies at each camera location. It supports incoming bandwidth up to 40 Mbps and real-time decoding across all 4 channels at up to 8MP. This model also accepts Hikvision’s broader smart camera ecosystem, including AcuSense, ColorVu, thermal, ANPR, and people-counting models, making it a capable foundation for a properly specified 4-camera system at home or in a small business.
Key Capabilities
4TB HDD Preinstalled
The 4TB surveillance-grade hard drive is fitted at the factory, so there is no separate drive purchase or installation required. The single SATA slot can be upgraded to a maximum of 10TB if additional storage is needed later.
4 Built-In PoE Ports
Each of the 4 PoE ports delivers both power and video data over a single Cat5e or Cat6 cable, simplifying wiring runs and eliminating the cost of separate power adaptors or a secondary PoE switch for standard 4-camera deployments.
Version 4 GUI
The v4 interface is shared with Hikvision’s I-Series recorders and offers a cleaner menu structure, improved live view options, and more intuitive playback controls compared to earlier NVR firmware generations – a meaningful upgrade for day-to-day usability.
Smart Camera Compatibility
Fully compatible with Hikvision’s AcuSense, ColorVu, thermal, ANPR, people-counting, and heatmap cameras, giving installers the flexibility to use advanced smart camera models without needing to upgrade the recorder later.
H.265+ Compression and TLS Encryption
H.265+ compression reduces storage consumption significantly compared to H.264, stretching the 4TB drive further on continuous recording. Dual stream recording is protected by TLS encryption to keep video data secured in transit.
HDMI and VGA Outputs
Independent HDMI and VGA outputs allow simultaneous connection to two displays. The HDMI output supports resolutions up to 8K, making this unit compatible with modern high-resolution monitors for local live view and playback.
Best For
- Residential CCTV Systems: The 4-channel capacity and preinstalled HDD suit a typical home installation covering front entry, driveway, garage, and rear yard with no additional hardware purchases required.
- Small Business Installations: Retail shops, small offices, and reception areas needing 4 camera positions benefit from the compact footprint, PoE simplicity, and remote access via Hik-Connect.
- Installers Specifying Smart Camera Systems: The confirmed compatibility with AcuSense, ColorVu, and ANPR cameras lets installers pair this NVR with advanced smart cameras without recorder constraints limiting the feature set.
- Buyers Wanting a Plug-and-Play Setup: With a preinstalled drive and built-in PoE, the DS-7604NI-M1/4P can be operational as soon as cameras are connected, with no separate drive installation or PoE switch required.
Why Choose the DS-7604NI-M1/4P
The DS-7604NI-M1/4P sits in a practical position for small system builds: it carries the v4 GUI normally associated with Hikvision’s pricier I-Series recorders, while keeping the footprint and cost appropriate for 4-camera residential and small commercial jobs. The preinstalled 4TB drive removes the guesswork and additional cost of sourcing a compatible surveillance-rated hard drive separately. The 4 built-in PoE ports, 40 Mbps incoming bandwidth, 4-channel 8MP real-time decoding, and confirmed support for AcuSense and ColorVu cameras mean this recorder will not become a bottleneck if quality smart cameras are specified. TLS encryption and H.265+ compression are practical inclusions that a basic budget recorder would omit. Available through Security Wholesalers, the DS-7604NI-M1/4P is a well-specified option for installers and end users who want a recorder that can grow with the camera technology connected to it.
Buyer Decision Tips
Storage Planning: With H.265+ compression enabled across 4 cameras recording continuously, a 4TB drive typically provides several weeks of footage depending on camera resolution and motion frequency. If you need longer retention, the single SATA slot supports a drive upgrade up to 10TB – plan this before installation to avoid downtime later.
Channel Ceiling: This recorder is fixed at 4 channels with no expansion path. If there is any likelihood the site will need more than 4 cameras within the next 2-3 years, it is worth considering a higher-channel NVR from the outset rather than replacing the recorder later. The DS-7604NI-M1/4P is the right choice only where 4 camera positions are a permanent requirement.
Key Features & Technical Specifications
| Model | DS-7604NI-M1/4P |
| Video Channels | 4-channel IP camera input |
| Maximum Camera Resolution | Up to 8MP (4K) |
| Real-Time Decoding | 4-ch @ 8MP simultaneous |
| Incoming Bandwidth | Up to 40 Mbps |
| Video Compression | H.265+ / H.265 / H.264+ / H.264 |
| Built-In PoE Ports | 4 independent PoE ports |
| Preinstalled HDD | 4TB surveillance-grade hard drive |
| SATA Interfaces | 1 x SATA, maximum 10TB |
| Video Output | 1 x HDMI (up to 8K), 1 x VGA (independent) |
| Synchronous Playback | 4-channel |
| Recording Mode | Dual stream with TLS encryption |
| GUI Version | Version 4 (I-Series equivalent) |
| Smart Camera Support | AcuSense, ColorVu, ANPR, Thermal, People-Counting, Heatmap |
| VCA Support | Basic Video Content Analytics events |
| Remote Access | Hik-Connect (mobile, tablet, PC) |
Ideal Use Cases
Home Security Systems
A typical residential property with 4 camera positions benefits directly from the built-in PoE ports and preinstalled 4TB drive, keeping installation straightforward and the total system cost contained without sacrificing 8MP recording capability.
Small Retail and Office Fit-Outs
Shopfronts, reception areas, and small office environments needing 24/7 recording on 4 cameras can use this NVR with AcuSense or ColorVu cameras to get smart event detection without requiring a high-channel commercial recorder.
Driveways and Entry Points
Pairing this NVR with an ANPR-capable Hikvision camera at a gated entry or driveway is supported by the confirmed ANPR camera compatibility, allowing licence plate event logging without a separate specialist recorder.
Rental Property and Strata Monitoring
The compact form factor, Hik-Connect remote access, and plug-and-play PoE setup suit landlords or strata managers who need a low-maintenance system at a property they do not manage on-site day to day.
Installer Starter Systems
For installers putting together entry-level 4-camera proposals, the DS-7604NI-M1/4P provides a recorder with v4 GUI, H.265+ compression, and smart camera support that will satisfy most client requirements without over-specifying the recorder component.
Choosing the Right Model
- Choose this model if: Your installation requires exactly 4 camera positions, you want built-in PoE to avoid a separate switch, and you want the convenience of a preinstalled 4TB drive with compatibility across Hikvision’s smart camera range including AcuSense, ColorVu, and ANPR models.
- Choose a different model if: You anticipate needing more than 4 cameras at any point. This NVR has no channel expansion path, so a site likely to grow past 4 cameras should be specified with an 8-channel or higher recorder from the outset.
- Choose a different model if: You need more than 1 hard drive bay or plan to store footage across multiple drives for redundancy. The single SATA interface, while upgradeable to 10TB, does not support multi-drive configurations.
- Choose the no-HDD version if: You have a surplus surveillance-grade drive available or prefer to specify your own drive capacity independently. A version without the preinstalled hard drive is available for that scenario.
FAQs
- Does the DS-7604NI-M1/4P come with a hard drive already installed?
Yes. This model includes a 4TB surveillance-grade hard drive preinstalled at the factory. It is ready to record as soon as cameras are connected. If you prefer to source your own drive, a version of this NVR is available without the HDD. - How many cameras can this NVR support and can I add more later?
The DS-7604NI-M1/4P supports exactly 4 IP cameras. There is no channel expansion available on this model. If there is any chance the system will need additional cameras in the future, a higher-channel NVR should be selected at the time of installation to avoid replacing the recorder later. - What does the version 4 GUI mean in practical terms?
The v4 GUI is the same interface generation used in Hikvision’s I-Series NVRs. It provides a cleaner menu layout, more intuitive live view controls, and improved playback navigation compared to older Hikvision recorder interfaces. For end users managing footage day to day, it is noticeably easier to operate than previous GUI generations. - Does this NVR work with AcuSense and ColorVu cameras?
Yes. The DS-7604NI-M1/4P is confirmed compatible with Hikvision AcuSense, ColorVu, thermal, ANPR, people-counting, and heatmap camera models. Smart event alerts generated by those cameras can be received and managed through the NVR interface and via Hik-Connect remote access. - What is the maximum hard drive size this NVR will accept?
The single SATA interface supports drives up to 10TB. The unit ships with 4TB installed, which can be swapped out or upgraded at any point. Only surveillance-rated drives should be used – standard desktop drives are not rated for 24/7 continuous recording workloads. - Can I view cameras remotely on my phone?
Yes. Remote access is supported through the Hik-Connect app, available for iOS and Android as well as desktop PC. Hik-Connect allows live view, playback, and event notifications from anywhere with an internet connection, without requiring manual port forwarding when using Hik-Connect’s cloud relay function. - What video outputs does the DS-7604NI-M1/4P have, and can I connect two monitors?
The NVR includes an HDMI output supporting up to 8K resolution and an independent VGA output. Both can be used simultaneously, allowing connection to a dedicated monitor and a television or secondary display at the same time. This suits installations where local monitoring is needed in two separate locations within the same premises. This recorder is part of the Security Wholesalers range and is stocked locally for Australian installations.
Additional Information




























