Product Overview
Built for small residential and compact commercial installations, the Hikvision DS-7604NI-I1-4P is a 4-channel embedded PoE network video recorder designed around plug-and-play simplicity. Featuring 4 independent PoE interfaces, it powers and connects IP cameras directly without a separate switch, reducing cabling complexity for tight installations. Equipped with H.265+ compression, it supports recording at resolutions up to 12MP and delivers 40Mbps incoming bandwidth, making it capable of handling modern high-resolution Hikvision cameras. It runs the version 4 graphical user interface, bringing this compact unit in line with the broader I-series NVR range. This model fully supports AcuSense, ColorVu, ANPR, people counting, thermal, and heatmap cameras, providing compatibility with the current Hikvision camera lineup. It outputs to HDMI, VGA, and CVBS displays and includes Hik-Connect P2P for straightforward remote access setup. Note that no hard drive is included and must be purchased separately.
Key Capabilities
4-Port Built-In PoE
Each of the 4 PoE interfaces operates independently, powering cameras directly from the NVR without requiring a separate switch. This simplifies wiring in small residential or office installations and keeps equipment count low in compact enclosures.
Up to 12MP Recording
Supporting resolutions up to 12MP across all 4 channels, the DS-7604NI-I1-4P accommodates current and recent Hikvision camera ranges including 4K models, with 40Mbps throughput capacity to handle simultaneous high-resolution streams without bottlenecking.
H.265+ Compression
H.265+ intelligent compression can reduce bandwidth and storage demands by up to 50% compared with standard H.264. This directly affects how long footage is retained on a single drive, which matters when only 1 HDD bay is available.
AI Camera Compatibility
The recorder fully supports AcuSense, ColorVu, ANPR, people counting, thermal, and heatmap cameras from Hikvision. Human and vehicle search is accessible directly on the NVR, allowing operators to filter events without third-party software.
Hik-Connect P2P Remote Access
Hik-Connect P2P enables remote viewing setup without complex port forwarding. For domestic and small business sites where the owner manages the system themselves, this significantly reduces the time and technical knowledge required to establish remote monitoring.
Best For
- Small Home Installations: The 4-channel PoE design suits residential properties needing coverage of a front door, driveway, rear yard, and side gate without an external switch or complex cabling run.
- Small Commercial Premises: Retail shopfronts, small offices, and reception areas needing a compact, manageable 4-camera setup that still supports AI-capable cameras like AcuSense and ANPR models.
- Installers Upgrading Existing K-Series Systems: The DS-7604NI-I1-4P is the confirmed replacement for the DS-7604NI-K1-4P, offering the v4 GUI and expanded AI camera support as a direct upgrade path.
- Budget-Conscious Buyers Choosing Their Own HDD: Sold without a hard drive, this model suits buyers who want to select a drive size independently or already have a compatible surveillance drive available.
Why Choose the DS-7604NI-I1-4P
The DS-7604NI-I1-4P sits in a specific position in the Hikvision NVR range: it combines the simplicity of an all-in-one PoE recorder with genuine compatibility for the full current Hikvision camera lineup. A basic or older 4-channel NVR may not support AcuSense event filtering, ColorVu full-colour cameras, or ANPR functionality, limiting which cameras can be added to the system over time. This model removes that ceiling. With H.265+ compression reducing storage load and a 1-SATA bay accepting drives up to 8TB, it gives small site deployments meaningful retention capacity on a compact footprint. The v4 GUI brings consistent navigation for operators already familiar with the I-series range. Available at Security Wholesalers, the DS-7604NI-I1-4P is a practical choice for 4-camera installations where AI camera compatibility is a present or future requirement.
Buyer Decision Tips
Hard Drive Selection: This NVR ships without a hard drive. With 1 SATA bay supporting up to 8TB, select a surveillance-rated drive such as a WD Purple or Seagate SkyHawk. At 4 channels recording continuously at 1080p with H.265+, a 4TB drive typically provides several weeks of retention. If you are running 4K cameras on all channels, consider a 6TB or 8TB drive to maintain adequate retention periods.
Channel Expansion Limit: The DS-7604NI-I1-4P is fixed at 4 channels with 4 PoE ports. If there is any likelihood of adding more than 4 cameras to the site in future, this model cannot be expanded and a higher channel NVR should be considered at the outset. Plan for the final camera count before purchasing the recorder.
Key Features & Technical Specifications
| Model |
DS-7604NI-I1-4P |
| Video Channels |
4 |
| PoE Interfaces |
4 x plug and play independent PoE ports |
| Maximum Recording Resolution |
Up to 12MP |
| Incoming Bandwidth |
40Mbps |
| Video Compression |
H.265+, H.265, H.264+, H.264, MPEG4 |
| HDD Bays |
1 x SATA interface |
| Maximum HDD Capacity |
Up to 8TB |
| Hard Drive Included |
No – sold without HDD |
| Video Output |
HDMI, VGA, CVBS |
| Alarm I/O |
Yes |
| AI Camera Support |
AcuSense, ColorVu, ANPR, people counting, thermal, heatmap |
| Smart Search |
Human and vehicle search |
| Remote Access |
Hik-Connect P2P |
| User Interface |
Version 4 GUI (I-series) |
| Replaces |
DS-7604NI-K1-4P |
Ideal Use Cases
Residential Properties
Homes needing 4-camera coverage of entry points, driveways, and backyards benefit from the built-in PoE ports, which eliminate the need for a separate switch and allow cameras to be powered directly from the NVR location.
Small Retail Shopfronts
Compact shops requiring coverage of a counter, entrance, and storage area can use the 4 channels with AcuSense or ANPR-capable cameras, with human and vehicle search providing faster event review without full video scrubbing.
Small Office Environments
Single-floor offices needing reception, corridor, carpark, and entry coverage fit naturally into a 4-channel layout. The v4 GUI and Hik-Connect P2P remote access allow straightforward management without on-site IT support.
K-Series System Upgrades
Sites running the older DS-7604NI-K1-4P can replace it directly with this model, gaining the v4 GUI, full AI camera support, and H.265+ compression while retaining the same 4-channel PoE format and existing camera cabling.
Childcare and Small Education Facilities
Small childcare centres and education facilities needing people counting or heatmap analytics alongside standard recording can use this NVR’s confirmed support for those camera types to build a compliant, analytics-capable 4-camera system.
Choosing the Right Model
- Choose this model if: You need a compact 4-channel plug-and-play PoE NVR that supports the full current Hikvision AI camera range including AcuSense, ColorVu, ANPR, and people counting cameras, and you are comfortable selecting and adding your own hard drive separately.
- Choose a different model if: The site requires more than 4 cameras now or is likely to expand – this recorder is fixed at 4 channels with no upgrade path. Similarly, if you prefer a ready-to-record unit with a hard drive pre-installed, consider an equivalent NVR sold with a bundled HDD.
FAQs
- Does the DS-7604NI-I1-4P come with a hard drive?
No. The DS-7604NI-I1-4P is supplied without a hard drive. It has 1 SATA bay that accepts a surveillance-rated drive up to 8TB. You will need to purchase and install a compatible HDD such as a WD Purple or Seagate SkyHawk before the unit can record footage locally.
- What replaced the DS-7604NI-K1-4P, and is this the correct upgrade?
Yes. The DS-7604NI-I1-4P is the confirmed replacement for the DS-7604NI-K1-4P. It offers the same 4-channel PoE form factor but adds the version 4 GUI, H.265+ compression, and full compatibility with AcuSense, ColorVu, ANPR, and people counting cameras, which the older K-series model did not fully support.
- Can this NVR work with cameras from other brands?
The DS-7604NI-I1-4P is an ONVIF-capable NVR, but AI features such as AcuSense event filtering, human and vehicle search, and ANPR functionality are confirmed to work with compatible Hikvision cameras. Third-party cameras may connect for basic recording but will not deliver the AI analytics capabilities listed in the product specifications.
- How much footage can I store on this NVR?
Storage capacity depends on the drive size you install (up to 8TB), the number of channels recording, camera resolution, and frame rate. H.265+ compression significantly reduces file sizes compared with H.264. For a 4-camera system recording at 1080p continuously with H.265+, a 4TB drive typically provides several weeks of footage. Running 4K cameras on all channels will reduce retention time and warrants a 6TB or 8TB drive.
- Does the DS-7604NI-I1-4P support remote viewing on a phone?
Yes. The NVR includes Hik-Connect P2P, which allows remote viewing via the Hik-Connect app on iOS and Android without requiring manual port forwarding. This makes remote access setup straightforward for residential and small business installations managed without a dedicated IT team.
- Is this NVR suitable for a small business installation?
For sites needing exactly 4 cameras, the DS-7604NI-I1-4P works well in small retail, office, and hospitality environments. Its support for AcuSense and people counting cameras, combined with human and vehicle search on the recorder itself, provides event management capability beyond basic motion recording. Security Wholesalers supplies this unit as part of the broader Hikvision I-series NVR range. If the site may grow beyond 4 cameras, a higher channel NVR should be considered at the time of installation.
Additional Information
GUI Demo
3 Year Manufacturer Warranty
All Hikvision IP cameras and recording device (NVR’s/DVR’s) are covered by a 3 year back-to-base manufacturer warranty.
(Note disk drives limited to 1 one year)
Our warranty is limited to the replacement of faulty items or parts and does not include damage due to incorrect fitting of parts or accessories.
Consumer Law, Return, Refund and Exchange Policy:
(a) ACL: Certain legislation including the Australian Consumer Law (ACL) in the Consumer and Competition Act 2010 (Cth), and similar consumer protection laws and regulations may confer you with rights, warranties, guarantees and remedies relating to the provision of goods or services to you by us via the Site which cannot be excluded, restricted or modified. Our liability is governed solely by the ACL and these Terms.
(b) Goods: If you are a consumer as defined in the ACL, the following notice applies to you: “Our goods come with warranties and guarantees that cannot be excluded under the Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or a refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure
(c) Our warranties: To the extent permitted by law, we exclude all express and implied warranties, and all material and work is provided to you without warranties of any kind, either express or implied. We expressly disclaim all warranties including but not limited to implied warranties of merchantability and fitness for a particular purpose.
(d) Manufacturer warranties: Certain products, including particular models of IP security cameras and DVR/NVR equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is in addition to but may overlap with any rights and remedies you may have under applicable law, including any Consumer Guarantees. If you are not considered a “consumer” within the meaning of the ACL, the manufacturer’s warranty may be your sole remedy. You should check the manufacturer’s warranty, as many manufacturers’ warranties do not apply in a business or commercial setting. Please contact the manufacturer if you would like to make a claim under the manufacturer’s warranty.
(e) Repair, replacement or a refund: If you wish to seek repair, replacement or a refund for a product, please contact us and we will explain the requirements to you. This may include you providing evidence of the faulty product to us.
(f) Refund: You are not entitled to a refund for change of mind. If you are entitled to a refund, we will only give you the refund once evidence of faulty product is received by us, or we have received the product at our warehouse and inspected it and assessed whether it is eligible for a refund under these Terms. Any refund we make will be by the same payment method used to purchase the product.
(g) Installed: Subject to this clause, we will not accept for return any product that has been used, connected, installed, attempted to be connected or installed, or if your product is custom-made or is a special buy product.
(h) Packaging: You must adequately package any product you are returning for our collection to ensure that it is not damaged during return delivery to our warehouse. You are also responsible for arranging the return delivery and the costs involved.
(i) Duty of care: You have a duty of care for the product while it is in your possession. If you damage products, then subsequently return the products, you may be liable to pay to repair the product to its original condition. In these circumstances, where a repair is not economically viable, no refund will be made.
More Terms & Conditions here – https://www.securitywholesalers.com.au/terms-and-conditions/
