Product Overview
Combining thermal heat detection with a 4MP optical channel, the DS-2TD4228-10/S2 is a bi-spectrum network speed dome built for high-stakes outdoor monitoring where standard cameras cannot operate effectively. Featuring a 256×192 thermal sensor alongside a 4MP optical sensor, this PTZ speed dome delivers simultaneous thermal and visual imaging across complete darkness, heavy fog, smoke and other low-visibility conditions. Equipped with smart tracking across panorama, event-triggered and multi-scene patrol modes, it follows targets automatically without manual operator input. It also integrates perimeter protection analytics including line crossing, intrusion, region entrance and region exit detection, alongside dynamic fire detection and temperature exception alarms for early event awareness. Built with an IP66-rated housing, the DS-2TD4228-10/S2 suits demanding outdoor deployments including critical infrastructure sites, large industrial properties and remote perimeter installations requiring both heat-based detection and optical verification in a single unit.
Key Capabilities
Bi-Spectrum Thermal and Optical Imaging
The 256×192 thermal sensor detects heat signatures invisible to standard cameras, while the 4MP optical channel provides visual context for operator verification. Running both channels simultaneously means no switching between modes during an active event.
Smart PTZ Tracking
Supports panorama tracking, event-triggered tracking and multi-scene patrol tracking, allowing the speed dome to follow targets automatically across a wide site without continuous manual control. This is critical for large perimeters with limited operator staffing.
Perimeter Protection Analytics
Line crossing, intrusion, region entrance and region exit detection give operators configurable alert zones across the site perimeter. Events trigger alerts and can initiate automatic PTZ tracking responses without manual input.
Dynamic Fire Detection and Temperature Alarms
The thermal channel supports dynamic fire detection and temperature exception alarms, providing early warning before a fire event escalates. This suits industrial, forestry and energy infrastructure sites where early thermal anomaly detection is a site requirement.
All-Condition Outdoor Detection
Because the thermal channel does not rely on visible light, the DS-2TD4228-10/S2 maintains detection capability in complete darkness, heavy smoke and dense fog where optical cameras lose effectiveness entirely. Coverage quality does not degrade with environmental conditions.
IP66 Weatherproof Housing
The IP66-rated speed dome housing withstands direct water ingress and dust exposure, making it appropriate for coastal, desert, tropical and industrial outdoor installations where the unit will face sustained environmental exposure over its operational life.
Best For
- Critical Infrastructure Perimeters: Power stations, water treatment facilities, substations and similar sites where thermal detection provides a layer of intrusion awareness that optical cameras alone cannot deliver.
- Fire-Risk Industrial and Forestry Sites: Factories, warehouses, timber yards and forested land where temperature exception alarms and dynamic fire detection provide early-stage fire event notification before flames become visible.
- Remote and Unmanned Perimeters: Sites with minimal on-site staff where smart PTZ tracking automates target following after a perimeter alert without requiring a live operator to manually control the camera.
- Low-Visibility and Night Environments: Border zones, coastal installations and outdoor sites exposed to fog, smoke or complete darkness where thermal imaging maintains detection capability regardless of lighting conditions.
- Large Mining and Industrial Properties: Expansive outdoor areas where a single PTZ unit with patrol tracking can cover terrain across multiple preset positions, reducing the total number of cameras required for perimeter coverage.
Why Choose the DS-2TD4228-10/S2
A standard PTZ camera with optical imaging alone cannot maintain detection performance in darkness, smoke or fog. The DS-2TD4228-10/S2 solves this by combining a 256×192 thermal sensor with a 4MP optical channel in a single speed dome housing, providing heat-based detection alongside visual confirmation without requiring two separate cameras at each monitoring position. The addition of dynamic fire detection and temperature exception alarms extends the unit beyond standard perimeter monitoring into early fire event detection, which is a specific requirement for energy, industrial and forestry installations. Smart tracking across panorama, event-triggered and multi-scene patrol modes reduces the operator burden on large sites. For Australian installers and integrators working on critical infrastructure or remote perimeter projects, the DS-2TD4228-10/S2 is available through Security Wholesalers with a 7-8 week lead time that should be factored into project scheduling.
Buyer Decision Tips
Lead Time Planning: The DS-2TD4228-10/S2 carries a 7-8 week lead time. For project-based installations, order well ahead of your scheduled installation date to avoid program delays. Confirm this timeline with your supplier at the point of order rather than at delivery stage.
Thermal Resolution vs. Detection Range: The 256×192 thermal sensor is designed for perimeter detection and heat anomaly identification rather than fine thermal detail at long distance. If your site requires higher thermal resolution for detailed heat mapping or precise temperature measurement at extended ranges, review the thermal specification against your site’s actual detection distance requirements before ordering.
Key Features & Technical Specifications
| Model |
DS-2TD4228-10/S2 |
| Camera Type |
Bi-Spectrum Thermal and Optical Network Speed Dome (PTZ) |
| Thermal Sensor Resolution |
256 x 192 |
| Optical Sensor Resolution |
4 Megapixel |
| Optical Lens |
10mm |
| Imaging Channels |
Dual channel – thermal and optical simultaneous |
| Smart Tracking |
Panorama tracking, event-triggered tracking, multi-scene patrol tracking |
| Perimeter Protection |
Line crossing, intrusion, region entrance, region exit |
| Fire Detection |
Dynamic fire detection, temperature exception alarms |
| Weather Protection |
IP66 |
| Installation Type |
Outdoor |
| Network Interface |
Network (IP) |
| Lead Time |
7-8 weeks |
Ideal Use Cases
Power and Energy Infrastructure
Substations, solar farms and wind installations require perimeter monitoring that works after dark. The thermal channel detects intruder heat signatures regardless of lighting, while perimeter analytics trigger alerts and initiate automatic PTZ tracking.
Industrial Fire Risk Monitoring
Factories, chemical storage facilities and warehouses benefit from the DS-2TD4228-10/S2’s dynamic fire detection and temperature exception alarms, which identify thermal anomalies at early stages before visible fire or smoke develops.
Remote and Unmanned Site Perimeters
Sites with no permanent staff rely on automated detection and tracking. Multi-scene patrol tracking and event-triggered smart tracking allow the speed dome to cover large patrol routes and respond to intrusion events without operator intervention.
Coastal and Maritime Borders
Fog, rain and darkness are standard conditions at coastal monitoring points. The IP66-rated housing withstands marine environments, and the thermal channel maintains detection capability through fog and spray where optical sensors would be blind.
Mining and Resource Sites
Large, hazardous and low-light outdoor areas with dust, smoke or gas plumes present challenges for optical-only cameras. The thermal sensor operates through these obscurants, providing perimeter and equipment monitoring where optical coverage would be compromised.
Forestry and Wildfire Detection
Forested and bushland areas can use the temperature exception alarm and dynamic fire detection capability to identify heat sources at early stages. PTZ patrol presets allow a single unit to monitor multiple forest zones across a scheduled rotation.
Choosing the Right Model
- Choose this model if: Your site requires simultaneous thermal detection and optical verification in a single PTZ unit, particularly where darkness, smoke or fog would render an optical-only camera ineffective, or where fire detection and temperature monitoring are site requirements.
- Choose a different model if: Your application requires high-resolution thermal imaging for detailed heat mapping or precise temperature measurement at extended range. The 256×192 thermal sensor is designed for perimeter detection rather than high-resolution thermal analysis, and a dedicated high-resolution thermal camera would better suit that application.
- Choose a different model if: Your project timeline cannot accommodate a 7-8 week lead time. If installation is required within a shorter window, an in-stock optical PTZ speed dome should be considered instead.
- Choose a different model if: Budget is a primary constraint and full thermal detection is not a site requirement. A standard optical PTZ speed dome will deliver PTZ tracking and perimeter analytics at a significantly lower price point for sites that do not need thermal imaging.
FAQs
- What does bi-spectrum mean on the DS-2TD4228-10/S2?
Bi-spectrum means the camera operates two independent imaging channels simultaneously: a 256×192 thermal sensor that detects heat signatures, and a 4MP optical sensor that captures visual detail. Both channels run at the same time, so operators can view thermal detection data alongside a conventional colour or monochrome image without switching between modes.
- Can the thermal channel see in complete darkness?
Yes. The thermal sensor detects heat emitted by objects and does not require any visible light to operate. Humans, vehicles and warm equipment are detectable in total darkness. This is the core advantage of the thermal channel over optical imaging, which depends on available light or supplementary illumination.
- What fire detection capabilities does the DS-2TD4228-10/S2 have?
The unit supports dynamic fire detection and temperature exception alarms through the thermal channel. These functions identify thermal anomalies associated with fire or elevated heat sources and trigger alerts at early stages before flames become visible to an optical sensor. This suits industrial, energy and forestry installations where early fire awareness is a specific monitoring requirement.
- How does smart tracking work on this speed dome?
The DS-2TD4228-10/S2 supports 3 smart tracking modes: panorama tracking, which scans a wide scene for targets; event-triggered tracking, which initiates PTZ movement automatically when a perimeter analytic fires; and multi-scene patrol tracking, which moves between preset positions and tracks targets detected within each scene. All modes operate without manual PTZ input from an operator.
- What perimeter analytics are available on this model?
Confirmed perimeter protection analytics include line crossing detection, intrusion detection, region entrance detection and region exit detection. These are configurable to define specific zones on the camera’s field of view and can trigger alerts or initiate smart tracking responses when a target crosses or enters a defined boundary.
- Is the DS-2TD4228-10/S2 suitable for permanent outdoor installation in harsh conditions?
Yes. The IP66-rated housing protects against dust ingress and direct water exposure, making it suitable for outdoor sites including coastal, industrial, mining and tropical environments. IP66 is a recognised standard for permanent outdoor camera installations in demanding Australian conditions. Available through Security Wholesalers, this unit is supplied ready for outdoor mounting.
- What is the lead time and how should I plan my order?
The DS-2TD4228-10/S2 carries a 7-8 week lead time from order. For project-based installations, this should be factored into your procurement schedule well ahead of your planned installation date. Confirm the current lead time with your supplier at order placement, as supply timelines on specialist thermal products can vary.
Product Video Samples
Additional Information
Hikvision Warranty
3-Year Manufacturer Warranty
All Hikvision IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty and authorised dealer partner support.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit www.securitywholesalers.com.au/terms-and-conditions
Official Hikvision Partner for 2026
Authorised Hikvision Dealer Partner for 2026
As a Trusted Hikvision Dealer Partner and Hikvision Authorised Store, SecurityWholesalers.com.au is more than just a reseller — we’re a nationally recognised partner delivering genuine Hikvision solutions, backed by expert technical support and deep industry knowledge.
Our team supports systems across all major sectors — including residential homes, commercial businesses, schools, government infrastructure, warehouses, and local councils. When you choose us, you’re selecting a Hikvision-certified partner with a proven track record in performance, reliability, and customer satisfaction.
- Official Hikvision Product Support
Get access to genuine Hikvision technical resources and support, delivered by trained professionals who work with these systems daily.
- Comprehensive System Assistance
From product selection to setup, configuration, remote access support, and firmware upgrades — we offer step-by-step guidance to ensure your system is optimal.
- Reliable After-Sales Service
We provide continued support for configuration, troubleshooting, and warranty claims. Whether you’re a first-time user or a seasoned installer, we ensure your Hikvision system operates flawlessly.
- Genuine Products & Fast Dispatch
All Hikvision stock is sourced from authorised Australian distributors and shipped promptly from our local warehouse. No delays, no grey-market risks, no international return hassles.
- Industry-Wide Trust
Our clients range from councils and schools to enterprise businesses and security professionals — all trusting us for exceptional service, product reliability, and expert advice.
- Real-World Security Expertise
Unlike generic electronics stores, we specialise in security. Our team includes qualified installers and consultants offering tailored recommendations based on real-world experience — not just inventory lists.
- 3 Years Manufacturer Warranty ensuring your security system remains reliable for years to come.
At SecurityWholesalers.com.au, we’re committed to more than just competitive pricing — we offer true partnership and protection through every stage of your Hikvision journey. We’re not your average security equipment supplier — choose the team that industry professionals trust.
