Product Overview
Built for environments where corrosion, extreme temperatures, and long detection distances define the installation challenge, the DS-2DT8C442MXG-LWT is Hikvision’s 4 MP anti-corrosion PTZ speed dome engineered for demanding outdoor deployments. Featuring a 1/1.8-inch progressive-scan CMOS sensor with 2560 x 1440 resolution, it combines a 42x optical zoom (6.0-252 mm) with DarkFighter low-light imaging and hybrid illumination reaching up to 500 m IR and 100 m white light. The anti-corrosion polymer enclosure, rated IP67, is specifically designed to survive coastal salt spray, chemical atmospheres, and industrial outdoor conditions where standard PTZ housings deteriorate rapidly. Full 360-degree continuous pan and -20 to +90-degree tilt with auto-flip deliver complete scene coverage, while the wide-to-telephoto zoom range allows operators to shift between broad situational awareness and close-in subject detail without repositioning the camera. This makes it well suited to ports, rail corridors, chemical facilities, and large open perimeters requiring both long-range reach and all-weather durability.
Key Capabilities
42x Optical Zoom with Wide-to-Tele Range
The 6.0-252 mm motorised lens shifts from a 58.8-degree wide-angle overview down to a 1.97-degree telephoto view. This allows a single camera to cover broad site awareness and then zoom in to inspect distant vehicles, personnel, or infrastructure without any image degradation from digital interpolation.
Anti-Corrosion Polymer Housing
Unlike standard aluminium or polycarbonate PTZ enclosures, the polymer anti-corrosion body is engineered to withstand coastal salt air, industrial chemical exposure, and aggressive outdoor atmospheres. This extends operational lifespan in environments where conventional PTZ cameras require frequent replacement or recoating.
DarkFighter Low-Light Imaging
DarkFighter technology achieves colour imaging down to approximately 0.001 Lux at F1.2, with monochrome sensitivity to 0.0005 Lux. On large unlit sites such as port perimeters or rail yards, this means usable colour detail is retained in near-darkness before the hybrid illuminators are even needed.
500 m IR and 100 m White Light Hybrid Illumination
The hybrid illumination system provides IR coverage up to 500 m for long-range covert detection and white-light fill up to 100 m for colour-accurate close-range footage. Installers can configure the lighting mode to suit the monitoring priority at each zone of the site.
Full PTZ Mechanics with Auto-Flip
Continuous 360-degree pan and -20 to +90-degree tilt with auto-flip allow the camera to track moving subjects across an entire scene without dead zones. Preset positions, patrol routes, and scan patterns let operators automate coverage across multiple points of interest without manual intervention.
IP67 and Extended Temperature Range
The IP67 dust and water ingress rating combined with an operating temperature range of -40°C to +70°C means this camera maintains function through freezing winters, tropical humidity, heavy rain, and extreme heat – conditions common to exposed infrastructure, transport corridors, and coastal industrial sites.
Best For
- Coastal and Marine Facilities: The anti-corrosion polymer housing resists salt-laden air and sea spray that cause rapid deterioration in standard PTZ enclosures, making it a practical long-term investment for quays, wharves, and offshore support facilities.
- Chemical Plants and Industrial Sites: Aggressive airborne chemicals that corrode standard camera housings are addressed directly by the polymer enclosure, enabling reliable operation in environments that would compromise conventional PTZ cameras within months.
- Rail Corridors, Highways, and Transport Hubs: The 42x optical zoom and 500 m IR range allow a single camera to cover long linear approaches, while preset patrol routes automate monitoring of multiple zones along a corridor without operator input.
- Large Outdoor Perimeters and Open Sites: Sites such as port security zones, large campuses, or event venues benefit from the wide-to-tele zoom range, allowing the same camera to survey a broad area and then close in on a specific subject or vehicle at distance.
Why Choose the DS-2DT8C442MXG-LWT
The DS-2DT8C442MXG-LWT occupies a specific niche that most PTZ cameras cannot fill. A standard IP67-rated PTZ will protect against rain and dust, but the polymer anti-corrosion enclosure on this model goes further, resisting the chemical and salt-based degradation that occurs in coastal, petrochemical, and heavy industrial settings. Paired with a 42x optical zoom, DarkFighter low-light sensitivity, and a hybrid illumination system with 500 m IR reach, it delivers the kind of long-range coverage that larger sites simply cannot achieve with fixed cameras or short-range PTZs. The -40°C to +70°C operating range adds further confidence for installations in extreme climates. Available through Security Wholesalers, the DS-2DT8C442MXG-LWT is suited to integrators and facility managers who need a PTZ solution that holds up to the physical environment as well as it performs on camera.
Buyer Decision Tips
Power Supply Requirement: The DS-2DT8C442MXG-LWT requires 36V DC power. This is not a standard PoE camera and cannot be powered directly from a conventional PoE switch or NVR PoE port. Confirm your power infrastructure before purchasing – a suitable 36V DC power supply or midspan injector must be planned into the installation. This is a critical step for new installations and retrofit projects alike.
Zoom Range vs. Coverage Planning: At the 6.0 mm wide end, the horizontal field of view is approximately 58.8 degrees, which is suitable for general scene awareness. At full 252 mm telephoto, this narrows to approximately 1.97 degrees, ideal for inspecting distant subjects but not for broad coverage simultaneously. For sites requiring both wide-area monitoring and close-range detail at the same time, plan for additional fixed cameras to complement PTZ deployment rather than relying solely on the DS-2DT8C442MXG-LWT to cover both tasks at once.
Key Features & Technical Specifications
| Resolution |
4 MP (2560 x 1440) |
| Image Sensor |
1/1.8-inch progressive-scan CMOS |
| Optical Zoom |
42x |
| Digital Zoom |
16x |
| Focal Length |
6.0-252 mm motorised |
| Horizontal Field of View |
Approx. 58.8° (wide) to 1.97° (tele) |
| Min. Illumination (Colour) |
~0.001 Lux @ F1.2 |
| Min. Illumination (B/W) |
~0.0005 Lux @ F1.2 |
| Min. Illumination (with Hybrid Light) |
0 Lux |
| IR Range |
Up to ~500 m |
| White Light Range |
Up to ~100 m |
| Pan Range |
360° continuous |
| Tilt Range |
-20° to +90° (auto-flip) |
| Ingress Protection |
IP67 |
| Housing |
Anti-corrosion polymer |
| Operating Temperature |
-40°C to +70°C |
| Power Supply |
36V DC |
Ideal Use Cases
Port and Wharf Security
Salt air and sea spray accelerate housing corrosion on standard PTZ cameras. The anti-corrosion polymer enclosure and IP67 rating allow the DS-2DT8C442MXG-LWT to operate continuously on quays, wharves, and marine terminals without the housing degradation that affects conventional metal-bodied cameras.
Chemical and Petrochemical Facilities
Airborne chemical vapours and reactive agents in processing plant environments attack standard camera enclosures over time. The polymer anti-corrosion housing is specifically suited to these atmospheres, supporting long-term deployment at perimeter fences, tank farms, and loading zones.
Railway and Highway Surveillance
Long linear corridors benefit from the 42x optical zoom and 500 m IR range, which allow a single mounted camera to observe approaching trains, vehicles, or personnel from considerable distance. Preset patrol functions automate monitoring of multiple positions along the corridor.
Large Open-Air Venues and Campuses
The wide-angle end of the zoom range provides broad situational awareness across open grounds, while the telephoto end allows operators to zoom in on specific activity without deploying additional cameras. Auto-flip tilt ensures full vertical coverage when subjects pass directly beneath the camera.
Extreme Climate Installations
With an operating temperature range of -40°C to +70°C, the DS-2DT8C442MXG-LWT maintains function through freezing alpine winters and high-heat tropical or desert environments. This makes it suitable for infrastructure monitoring in regions where seasonal temperature extremes would disable standard outdoor cameras.
Choosing the Right Model
- Choose this model if: Your installation is in a corrosive environment such as a coastal facility, chemical plant, or heavy industrial site, and you require long-range PTZ coverage with 42x optical zoom and 500 m IR reach in a housing built specifically to resist chemical and salt-based degradation.
- Choose a different model if: Your site does not involve corrosive atmospheres and a standard IP67-rated PTZ would suffice – the anti-corrosion polymer construction adds cost that is not necessary for sheltered urban or suburban installations. Similarly, if your installation requires PoE power delivery from an NVR or switch, a standard PoE PTZ camera would simplify cabling, as this model requires a dedicated 36V DC supply.
FAQs
- What makes the anti-corrosion polymer housing different from a standard IP67 PTZ camera?
IP67 protects against water and dust ingress, but the enclosure material itself can still corrode in salt-laden or chemically reactive environments. The polymer anti-corrosion body on the DS-2DT8C442MXG-LWT is specifically formulated to resist the surface degradation that affects standard metal or polycarbonate housings in coastal, marine, and industrial chemical settings – IP67 protection and corrosion resistance are two separate properties.
- Does this camera support PoE power from a standard NVR or switch?
No. The DS-2DT8C442MXG-LWT requires 36V DC power and is not compatible with standard 802.3af or 802.3at PoE. A dedicated 36V DC power supply must be provided at or near the installation point. Plan this into your cable routing and power infrastructure before purchasing.
- How does the 42x optical zoom differ from digital zoom in practical use?
Optical zoom uses the physical lens elements to bring subjects closer, maintaining full 4 MP image resolution throughout the zoom range. Digital zoom simply enlarges a cropped portion of the sensor output, reducing effective resolution as zoom increases. The DS-2DT8C442MXG-LWT’s 42x optical zoom delivers clean 2560 x 1440 detail at the telephoto end, whereas the additional 16x digital zoom is best used only where optical range has already been maximised.
- What is the practical nighttime detection range on an unlit site?
The hybrid illumination system provides IR coverage up to approximately 500 m for long-range detection in complete darkness. White-light illumination extends to approximately 100 m for colour-accurate footage of subjects at closer range. DarkFighter sensitivity also enables usable colour imaging down to approximately 0.001 Lux before the illuminators activate, which covers many partially lit outdoor environments without requiring the lights to run continuously.
- Can the DS-2DT8C442MXG-LWT be mounted on a wall bracket or does it require a dedicated pole?
The 8-inch speed dome form factor is designed for external mounting and is compatible with standard pole, wall, and pendant mounting configurations. The appropriate mounting accessory will depend on your specific installation surface and orientation. Confirm bracket compatibility with your installer before finalising the mounting approach.
- How does the operating temperature range affect installation planning?
The confirmed operating range of -40°C to +70°C means the camera is suitable for extreme climate deployments – from sub-zero alpine winters to high-heat tropical or industrial environments. This reduces the need for additional housing heaters or cooling provisions in most outdoor settings, simplifying installation and reducing ongoing maintenance overhead.
- Is the DS-2DT8C442MXG-LWT available in Australia and what support is provided?
Yes, the DS-2DT8C442MXG-LWT is part of the Security Wholesalers range and is stocked for the Australian market. A manufacturer datasheet is available for download via the Additional Information section below. Check stock availability before ordering as lead times can vary for specialised industrial PTZ models.
Additional Information
Hikvision Warranty
3-Year Manufacturer Warranty
All Hikvision IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty and authorised dealer partner support.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit www.securitywholesalers.com.au/terms-and-conditions
Official Hikvision Partner for 2026
Authorised Hikvision Dealer Partner for 2026
As a Trusted Hikvision Dealer Partner and Hikvision Authorised Store, SecurityWholesalers.com.au is more than just a reseller — we’re a nationally recognised partner delivering genuine Hikvision solutions, backed by expert technical support and deep industry knowledge.
Our team supports systems across all major sectors — including residential homes, commercial businesses, schools, government infrastructure, warehouses, and local councils. When you choose us, you’re selecting a Hikvision-certified partner with a proven track record in performance, reliability, and customer satisfaction.
- Official Hikvision Product Support
Get access to genuine Hikvision technical resources and support, delivered by trained professionals who work with these systems daily.
- Comprehensive System Assistance
From product selection to setup, configuration, remote access support, and firmware upgrades — we offer step-by-step guidance to ensure your system is optimal.
- Reliable After-Sales Service
We provide continued support for configuration, troubleshooting, and warranty claims. Whether you’re a first-time user or a seasoned installer, we ensure your Hikvision system operates flawlessly.
- Genuine Products & Fast Dispatch
All Hikvision stock is sourced from authorised Australian distributors and shipped promptly from our local warehouse. No delays, no grey-market risks, no international return hassles.
- Industry-Wide Trust
Our clients range from councils and schools to enterprise businesses and security professionals — all trusting us for exceptional service, product reliability, and expert advice.
- Real-World Security Expertise
Unlike generic electronics stores, we specialise in security. Our team includes qualified installers and consultants offering tailored recommendations based on real-world experience — not just inventory lists.
- 3 Years Manufacturer Warranty ensuring your security system remains reliable for years to come.
At SecurityWholesalers.com.au, we’re committed to more than just competitive pricing — we offer true partnership and protection through every stage of your Hikvision journey. We’re not your average security equipment supplier — choose the team that industry professionals trust.
Free Express Shipping*
Shipping & Delivery
At SecurityWholesalers.com.au, we prioritise fast and reliable delivery across Australia. Whether you’re ordering for home or business, you can expect professional service, tracked shipments, and speedy fulfilment — every time.
✔ FREE Shipping Australia-Wide on Orders Over $100
Enjoy free express shipping on all orders over $100. For orders under $100, a flat rate of $20.00 applies. We proudly offer nationwide delivery using trusted courier partners for your peace of mind.
✔ Same-Day Despatch for Fast Delivery
Place your order before 10am (Sydney time) on any business day and we’ll do our best to despatch it the same day, subject to stock availability. We receive new stock into our warehouse every second day, so we always strive to ship the freshest arrivals directly to you. Most orders are received within 1-3 business days via the Express Post network, covering Australian capital cities and major metro areas. Deliveries to regional locations typically take 2–5 business days.
For urgent orders, please contact our customer care team to expedite the delivery and ensure that we can get your equipment to your project site on time.
✔ Reliable Couriers You Can Trust
We primarily use StarTrack Express for fast, secure shipping. Depending on warehouse availability, we may also use Toll or Couriers Please — whichever gets your order to you fastest.
✔ Order Processing & Tracking
Orders are processed Monday to Friday (excluding public holidays) and shipped within 24 hours. Tracking numbers are emailed to you by 11pm on the day your order ships. You can monitor your delivery through:
✔ Missed a Delivery?
If you’re not home at the time of delivery, your parcel will be left in a secure location if considered safe. If not, a collection card will be left and the parcel will be held at the nearest depot or post office for pickup.
✔ Need Help?
If you haven’t received your order within 4 business days, please contact us with your full name and order number. We’ll follow up promptly. Also, be sure to check your email spam folder for shipping notifications or attempted delivery messages.
Trade Discounts Available
Want even more savings? Register instantly for a Trade Account and, once approved, you’ll gain access to exclusive discounts on a wide range of products. It’s our way of supporting installers, resellers, and industry professionals with better pricing and priority service.
