Product Overview
Large-scale outdoor surveillance at ports, transport hubs, industrial perimeters and critical infrastructure sites demands a camera that can survey wide zones and then close in on fine detail without compromising image quality. The DS-2DF8C435MHS-DELW is Hikvision’s Ultra-Series PTZ speed dome built precisely for that role. Equipped with a dual 1/1.8″ progressive-scan CMOS sensor system delivering 4 MP (2560 x 1440) resolution, a 35x optical zoom spanning 5.9 mm to 206.5 mm, and DarkFighterX low-light imaging with IR illumination reaching approximately 300 metres, it maintains usable detail from dusk to full darkness. It also integrates face capture and vehicle detection analytics, 140 dB WDR, 3D DNR, and an IP67/IK10-rated housing with a built-in heater, wiper and demister for operation in conditions ranging from -40 degrees C to +70 degrees C. This makes it well suited to airports, railyards, coastal facilities and any exposed site where a single camera position must carry serious surveillance weight.
Key Capabilities
35x Optical Zoom with Full PTZ Range
The 5.9 mm to 206.5 mm motorised lens shifts from a 60.2 degree wide overview to a 2.24 degree telephoto in seconds, while 360 degree continuous pan and -20 to +90 degree tilt with auto-flip allows the camera to track movement across open sites without blind spots.
DarkFighterX Dual-Sensor Low-Light Imaging
The dual 1/1.8″ CMOS setup achieves a minimum illumination of approximately 0.0004 lux (colour) and 0.0001 lux (monochrome) at F1.6. In near-total darkness the integrated IR illuminators extend effective coverage to around 300 metres, maintaining detail well beyond what a standard PTZ sensor achieves.
4 MP Resolution for Identification at Range
At 2560 x 1440, the 4 MP output provides enough pixel density that zoomed-in footage of distant gates, vehicles or personnel retains sufficient detail for identification and investigation rather than just detection.
140 dB WDR, 3D DNR and EIS
140 dB wide dynamic range handles high-contrast scenes such as bright yard lighting against dark backgrounds or vehicle headlights at gates. 3D DNR reduces noise artefacts at long zoom distances, while EIS stabilises the image during vibration common on exposed industrial structures.
IP67/IK10 Housing with Heater, Wiper and Demister
The enclosure (excluding dome) carries full IP67 dust and water ingress protection and IK10 vandal resistance. The built-in heater, wiper and demister enable reliable operation from -40 degrees C to +70 degrees C, making it viable at coastal, alpine or industrial sites with no manual maintenance between cycles.
Face Capture and Vehicle Detection Analytics
Built-in analytics enable face capture and vehicle and traffic detection, allowing the system to trigger alarms, recordings or PTZ presets based on specific event types rather than general motion, reducing unnecessary footage review across busy large-site environments.
Best For
- Critical Infrastructure Perimeters: The 35x zoom and 300 m IR range let a single camera monitor long fence lines or access roads and still capture usable detail on individuals or vehicle plates at distance.
- Ports and Maritime Facilities: IP67/IK10 housing with heater and demister handles salt air and variable humidity, while long-range IR and PTZ tracking support continuous monitoring of docks, vessel movement and waterside approaches.
- Transport Hubs and Rail Environments: Wide PTZ coverage combined with face capture and vehicle detection analytics supports situational awareness and event-based recording at rail stations, transit corridors and road junctions.
- Large Open Sites Requiring a Single Coverage Point: Campuses, stadiums and public squares where running multiple fixed cameras is impractical benefit from the DS-2DF8C435MHS-DELW’s ability to pan, tilt and zoom across a large area from one mount.
- Harsh or Exposed Outdoor Environments: The -40 degrees C to +70 degrees C operating range and integrated wiper make it suitable for locations where standard outdoor domes would struggle with condensation, ice or extreme heat.
Why Choose the DS-2DF8C435MHS-DELW
Where a standard fixed outdoor camera or even a basic PTZ simply cannot span the distances and lighting challenges found at ports, industrial plants, airports or large perimeter sites, the DS-2DF8C435MHS-DELW steps into a different category. The dual 1/1.8″ sensor arrangement is not a spec-sheet formality; it delivers a minimum illumination figure around 0.0004 lux in colour, which is exceptional for a PTZ at this zoom ratio. Pairing that with approximately 300 metres of IR throw means distant targets remain visible without any supplemental lighting infrastructure. The 35x optical zoom, combined with 16x digital zoom, provides a total reach that covers both wide situational overviews and close-up inspection without repositioning the mount. The IP67/IK10 build with heater, wiper and demister removes the maintenance burden typical of exposed installations. Available through Security Wholesalers, the DS-2DF8C435MHS-DELW is specified for projects where camera failure or degraded performance carries real operational risk.
Buyer Decision Tips
Zoom Setting vs. Coverage Trade-off: At 5.9 mm (wide), the DS-2DF8C435MHS-DELW covers approximately 60.2 degrees horizontal, suitable for general scene awareness across an open yard or dock. At 206.5 mm (full telephoto), that narrows to approximately 2.24 degrees, giving tight detail on a subject 200+ metres away. Plan your PTZ presets and auto-tracking zones around these two extremes so the camera is doing both jobs efficiently rather than sitting at mid-zoom where it does neither well.
Lead Time Planning: The DS-2DF8C435MHS-DELW carries a 6-8 week lead time. If this camera is part of a staged construction or infrastructure project, confirm your order date against your site commissioning schedule. Substituting a different camera at short notice for a role this specific is rarely straightforward, so early procurement is strongly recommended.
Key Features & Technical Specifications
| Resolution |
4 MP (2560 x 1440) |
| Image Sensor |
Dual 1/1.8″ progressive-scan CMOS |
| Optical Zoom |
35x (5.9 mm to 206.5 mm motorised) |
| Digital Zoom |
16x |
| Horizontal Field of View |
Approx. 60.2 degrees (wide) to 2.24 degrees (telephoto) |
| Minimum Illumination |
Colour: approx. 0.0004 lux @ F1.6; B/W: approx. 0.0001 lux @ F1.6; 0 lux with IR active |
| IR Illumination Range |
Approx. 300 m |
| WDR |
140 dB |
| Noise Reduction |
3D DNR |
| Image Stabilisation |
EIS (Electronic Image Stabilisation) |
| Pan Range |
360 degrees continuous |
| Tilt Range |
-20 degrees to +90 degrees (with auto-flip) |
| Ingress Protection |
IP67 / IK10 (excluding dome) |
| Operating Temperature |
-40 degrees C to +70 degrees C |
| Built-in Accessories |
Heater, wiper, demister |
| Analytics |
Face capture, vehicle detection, traffic detection |
| Low-Light Technology |
DarkFighterX |
Ideal Use Cases
Ports and Waterfront Facilities
The IP67/IK10 housing with demister and heater withstands salt air, humidity and temperature extremes typical of coastal sites, while the 300 m IR range and 35x zoom allow monitoring of dockside approaches, vessel movement and restricted-access zones from a single elevated mount.
Airports and Aviation Infrastructure
Wide pan and tilt coverage combined with face capture analytics supports perimeter monitoring, access-point surveillance and incident response across large tarmac and terminal forecourt areas where fixed cameras would require many more mounting positions.
Rail Stations and Transit Corridors
Vehicle and traffic detection analytics allow the camera to flag specific events along busy corridors, while PTZ tracking enables operators to follow incidents across platforms, concourses or road junctions without switching between fixed camera feeds.
Power Stations and Substations
Critical infrastructure sites with expansive outdoor layouts and strict access control requirements benefit from the combination of long-range IR illumination, 4 MP detail at zoom and an enclosure rated for operation across a -40 to +70 degree C temperature window.
Industrial Yards and Mining Sites
EIS stabilisation manages vibration from nearby machinery, the wiper keeps the dome clear in dusty or wet conditions, and 140 dB WDR handles the stark contrast between floodlit work areas and unlit surrounds common in industrial night operations.
Large Public Spaces and Stadiums
A single DS-2DF8C435MHS-DELW can sweep a stadium forecourt, park or public square using 360 degree pan and zoom from wide overview to tight detail, reducing the total number of camera positions required while retaining the ability to capture identification-grade imagery when an event occurs.
Choosing the Right Model
- Choose this model if: Your site is a large outdoor environment requiring 300 m IR coverage, 35x optical zoom for distant identification, DarkFighterX low-light performance and a housing designed for harsh conditions including extreme temperatures and coastal exposure.
- Choose a different model if: Your application is a small commercial or residential property where a mid-range PTZ with a shorter zoom ratio and standard IR range would meet the requirement at a lower cost and with standard stock availability rather than a 6-8 week lead time.
- Choose a different model if: Your coverage need is best addressed by multiple fixed wide-angle cameras rather than a single PTZ, for example an indoor corridor or retail space where continuous wide coverage is more useful than a remotely directed zoom lens.
- Choose a different model if: You need full 360 degree simultaneous coverage with no blind spots during pan movement. A PTZ covers one zone at a time, so panoramic or multi-sensor cameras may be more appropriate for intersections or areas where simultaneous multi-direction monitoring is critical.
FAQs
- What is DarkFighterX and how does it differ from standard low-light cameras?
DarkFighterX is Hikvision’s dual-sensor low-light system that uses 2 separate 1/1.8″ CMOS sensors to improve brightness capture, colour fidelity and dynamic range in near-dark conditions. On the DS-2DF8C435MHS-DELW this results in a minimum illumination of approximately 0.0004 lux in colour mode, which is considerably lower than typical single-sensor PTZ cameras, maintaining usable colour imagery at light levels where standard sensors switch to monochrome or produce heavy noise.
- How far does the IR illumination reach and is it effective at full 35x zoom?
The built-in IR illuminators are rated to approximately 300 metres. The IR system is designed to complement the zoom lens so that at telephoto settings the illumination pattern narrows with the field of view, concentrating IR intensity on the distant subject rather than wasting it across a wide area that is no longer in frame. This maintains effective night-time imaging even when the lens is at or near its 206.5 mm maximum.
- Is the DS-2DF8C435MHS-DELW suitable for coastal or high-humidity environments?
Yes. The housing is rated IP67 for full dust exclusion and water ingress resistance, IK10 for mechanical impact resistance (excluding dome), and includes a built-in heater, wiper and demister. The operating temperature range of -40 degrees C to +70 degrees C covers most Australian coastal, alpine and industrial site conditions. The wiper keeps the dome surface clear in rain, salt spray or dust accumulation without requiring manual cleaning intervals.
- What analytics does the camera support and how are they triggered?
The DS-2DF8C435MHS-DELW supports face capture and vehicle and traffic detection. These analytics allow the system to generate alarms or trigger PTZ actions based on specific event types rather than general pixel-level motion. For large outdoor sites this is particularly useful for filtering genuine access events from background activity such as foliage movement or lighting changes.
- How does EIS help at high zoom levels on an exposed outdoor mount?
Electronic Image Stabilisation compensates for minor vibration introduced by wind load, nearby machinery or structural movement. At 35x zoom even a small amount of physical camera shake is amplified significantly in the image. EIS reduces this effect, keeping the footage usable during adverse weather or in industrial environments where the mounting structure is subject to ongoing vibration.
- What is the lead time for the DS-2DF8C435MHS-DELW and how should I plan my order?
This model carries a 6-8 week lead time. For project installations at infrastructure sites, it is important to place your order well before your commissioning date. Security Wholesalers recommends confirming stock availability and expected delivery timing at the point of specification so that procurement aligns with your site programme rather than delaying final commissioning.
- What mounting and power infrastructure does a PTZ like this typically require?
A camera of this size and capability generally requires a robust pole, wall bracket or parapet mount rated for the camera’s weight and wind load at the intended installation height. Power and data requirements should be confirmed against the product datasheet, as high-performance PTZ cameras at this specification level typically require a dedicated power supply rather than relying on standard PoE. Cabling runs should account for the camera’s operating current especially when the heater and IR are active simultaneously.
Additional Information
Hikvision Warranty
3-Year Manufacturer Warranty
All Hikvision IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty and authorised dealer partner support.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit www.securitywholesalers.com.au/terms-and-conditions
Official Hikvision Partner for 2026
Authorised Hikvision Dealer Partner for 2026
As a Trusted Hikvision Dealer Partner and Hikvision Authorised Store, SecurityWholesalers.com.au is more than just a reseller — we’re a nationally recognised partner delivering genuine Hikvision solutions, backed by expert technical support and deep industry knowledge.
Our team supports systems across all major sectors — including residential homes, commercial businesses, schools, government infrastructure, warehouses, and local councils. When you choose us, you’re selecting a Hikvision-certified partner with a proven track record in performance, reliability, and customer satisfaction.
- Official Hikvision Product Support
Get access to genuine Hikvision technical resources and support, delivered by trained professionals who work with these systems daily.
- Comprehensive System Assistance
From product selection to setup, configuration, remote access support, and firmware upgrades — we offer step-by-step guidance to ensure your system is optimal.
- Reliable After-Sales Service
We provide continued support for configuration, troubleshooting, and warranty claims. Whether you’re a first-time user or a seasoned installer, we ensure your Hikvision system operates flawlessly.
- Genuine Products & Fast Dispatch
All Hikvision stock is sourced from authorised Australian distributors and shipped promptly from our local warehouse. No delays, no grey-market risks, no international return hassles.
- Industry-Wide Trust
Our clients range from councils and schools to enterprise businesses and security professionals — all trusting us for exceptional service, product reliability, and expert advice.
- Real-World Security Expertise
Unlike generic electronics stores, we specialise in security. Our team includes qualified installers and consultants offering tailored recommendations based on real-world experience — not just inventory lists.
- 3 Years Manufacturer Warranty ensuring your security system remains reliable for years to come.
At SecurityWholesalers.com.au, we’re committed to more than just competitive pricing — we offer true partnership and protection through every stage of your Hikvision journey. We’re not your average security equipment supplier — choose the team that industry professionals trust.
Free Express Shipping*
Shipping & Delivery
At SecurityWholesalers.com.au, we prioritise fast and reliable delivery across Australia. Whether you’re ordering for home or business, you can expect professional service, tracked shipments, and speedy fulfilment — every time.
✔ FREE Shipping Australia-Wide on Orders Over $100
Enjoy free express shipping on all orders over $100. For orders under $100, a flat rate of $20.00 applies. We proudly offer nationwide delivery using trusted courier partners for your peace of mind.
✔ Same-Day Despatch for Fast Delivery
Place your order before 10am (Sydney time) on any business day and we’ll do our best to despatch it the same day, subject to stock availability. We receive new stock into our warehouse every second day, so we always strive to ship the freshest arrivals directly to you. Most orders are received within 1-3 business days via the Express Post network, covering Australian capital cities and major metro areas. Deliveries to regional locations typically take 2–5 business days.
For urgent orders, please contact our customer care team to expedite the delivery and ensure that we can get your equipment to your project site on time.
✔ Reliable Couriers You Can Trust
We primarily use StarTrack Express for fast, secure shipping. Depending on warehouse availability, we may also use Toll or Couriers Please — whichever gets your order to you fastest.
✔ Order Processing & Tracking
Orders are processed Monday to Friday (excluding public holidays) and shipped within 24 hours. Tracking numbers are emailed to you by 11pm on the day your order ships. You can monitor your delivery through:
✔ Missed a Delivery?
If you’re not home at the time of delivery, your parcel will be left in a secure location if considered safe. If not, a collection card will be left and the parcel will be held at the nearest depot or post office for pickup.
✔ Need Help?
If you haven’t received your order within 4 business days, please contact us with your full name and order number. We’ll follow up promptly. Also, be sure to check your email spam folder for shipping notifications or attempted delivery messages.
Trade Discounts Available
Want even more savings? Register instantly for a Trade Account and, once approved, you’ll gain access to exclusive discounts on a wide range of products. It’s our way of supporting installers, resellers, and industry professionals with better pricing and priority service.
