Product Overview
Upgrading an existing analogue coax installation to high-definition without relaying cable is one of the most common challenges in site renovations, and the DS-2CE16H8T-IT3F is built specifically for that scenario. This 5MP outdoor bullet camera operates over existing coaxial infrastructure using Hikvision TVI 4.0, delivering 2560 x 1944 resolution imagery without the cost of a full IP network rebuild. Featuring EXIR technology with 60m infrared range, the bullet housing makes it well suited to wall or eave mounting along perimeters, driveways, loading zones, and car parks where directional long-range coverage is needed. Equipped with 130dB Wide Dynamic Range and 3D DNR, it handles high-contrast environments such as entry points lit by direct sunlight. The 4-in-1 output supports TVI, AHD, CVI, and CVBS formats, and Up the Coax (Hikvision-C) control simplifies OSD adjustment from the recorder. An IP67 weatherproof rating suits permanent outdoor installation across Australian conditions.
Key Capabilities
5MP TVI 4.0 Over Coax
Transmits 2560 x 1944 resolution video over existing coaxial cable using TVI 4.0, allowing sites to move from standard-definition analogue to 5MP surveillance without replacing infrastructure. A practical upgrade path for commercial and industrial sites with established coax runs.
60m EXIR Night Vision
EXIR technology distributes infrared illumination more evenly across the field of view compared to standard IR, reducing overexposure at close range while maintaining usable detail at distances up to 60m. This is especially useful along driveways, car parks, and fence lines at night.
130dB Wide Dynamic Range
A 130dB WDR rating handles scenes where bright and dark areas exist simultaneously, such as entry points with direct sunlight behind subjects or exterior walls next to lit signage. This retains readable detail in both the shadowed and highlighted areas of the image simultaneously.
4-in-1 Format Output
Supports TVI, AHD, CVI, and CVBS output formats from a single unit, providing compatibility across a wide range of HD-over-coax recorders. Installers can adapt the camera to different site recorder brands without replacing hardware, and format selection is managed via the OSD menu or Up the Coax control.
IP67 Weatherproof Housing
The IP67 rating provides full dust protection and withstands temporary submersion in water, making the bullet housing suitable for exposed outdoor mounting in Australian conditions including heavy rain, dust, and humidity. It is rated for permanent installation on exterior walls, eaves, and perimeter structures.
Best For
- Coax Upgrade Projects: Sites with existing RG59 or RG6 coax runs can move to 5MP TVI 4.0 resolution without relaying cable, making the DS-2CE16H8T-IT3F a cost-effective upgrade from standard-definition analogue cameras.
- Outdoor Perimeter Coverage: The bullet housing mounts directionally on walls and eaves for focused coverage of driveways, gates, loading areas, and fence lines where a wide 2.8mm field of view is appropriate.
- High-Contrast Entry Points: The 130dB WDR performance makes this camera practical at entry doors, boom gates, and building facades where backlit conditions would wash out lower-grade cameras.
- Multi-Recorder Compatibility: The 4-in-1 output format means this camera can be deployed across different recorder brands supporting TVI, AHD, or CVI, giving installers flexibility on mixed sites.
Why Choose the DS-2CE16H8T-IT3F
The DS-2CE16H8T-IT3F separates itself from lower-tier TVI cameras primarily through its combination of 5MP resolution, 130dB WDR, and EXIR illumination over standard coax cabling. A basic HD-TVI camera at 2MP or 4MP with standard IR will not match the image quality in high-contrast or low-light conditions that this model delivers. The TVI 4.0 standard supports 5MP transmission reliably over existing coax runs, which is a meaningful advantage over cameras that require a network upgrade or new cabling to achieve equivalent resolution. The Up the Coax control channel means configuration changes can be pushed from the recorder without physical access to each camera, saving time on multi-camera installations. Available through Security Wholesalers, this is a practical choice for integrators and installers managing coax-based site upgrades across commercial and industrial properties.
Buyer Decision Tips
Coax vs. IP Network: This camera transmits video over coaxial cable only, not Cat5e or Cat6. If the site does not have existing coax runs or is being built from scratch with network cabling, an IP bullet camera connected via PoE will be a more practical choice. The DS-2CE16H8T-IT3F is specifically designed to extract 5MP performance from coax infrastructure that would otherwise be decommissioned.
Fixed Lens Field of View: The 2.8mm fixed lens provides a wide angle of view, which suits entry points, open car parks, and wide approaches where broader coverage is more useful than optical zoom or narrow framing. If the installation requires a tighter field of view to capture detail at distance, such as a long driveway or a narrow corridor, a camera with a longer focal length or varifocal lens should be considered instead.
Key Features & Technical Specifications
| Model |
DS-2CE16H8T-IT3F |
| Image Sensor |
5MP high-performance CMOS |
| Resolution |
2560 x 1944 |
| Lens |
2.8mm fixed |
| Video Standard |
TVI 4.0 |
| Video Output Format |
4-in-1 (TVI / AHD / CVI / CVBS) |
| IR Technology |
EXIR |
| IR Range |
Up to 60m |
| Wide Dynamic Range |
130dB |
| Noise Reduction |
3D DNR |
| OSD Menu |
Yes |
| Control Interface |
Up the Coax (Hikvision-C) |
| Weatherproof Rating |
IP67 |
| Power Supply |
12VDC |
| Housing Type |
Outdoor bullet |
Ideal Use Cases
Existing Coax Site Upgrades
Commercial and industrial sites with legacy coaxial wiring can adopt 5MP TVI 4.0 performance through the DS-2CE16H8T-IT3F without replacing cable runs. This reduces upgrade costs significantly while delivering a substantial resolution improvement over standard-definition analogue systems.
Car Parks and Parking Areas
The wide 2.8mm lens combined with 5MP resolution covers broad open areas in a single camera position, capturing vehicle registration detail across multiple lanes. The 60m EXIR range maintains usable night imagery across the length of a standard car park bay row.
Building Entry and Access Points
The 130dB WDR rating handles backlit entry conditions where subjects approach from outside into a lit doorway or gatehouse. Detail is retained on faces and signage even when the background is significantly brighter than the foreground, which is a common challenge at perimeter access control points.
Warehouse and Loading Dock Perimeters
Mounted on exterior walls or under eave overhangs, the IP67-rated bullet housing tolerates dust and moisture exposure common to industrial environments. The directional mounting profile allows coverage along loading dock approaches, roller door entries, and yard boundaries without a wide-angle dome compromising range.
Driveways and Gated Entries
Wall or post-mounted along residential or commercial driveways, the 2.8mm lens frames approaching vehicles and pedestrians across a wide angle, while the 60m EXIR range covers the full length of a standard driveway approach in darkness. The 4-in-1 output is compatible with existing TVI or AHD recorders already installed on site.
Choosing the Right Model
- Choose this model if: You are upgrading an existing site with analogue coaxial cabling and need 5MP resolution with strong low-light and high-contrast performance. The TVI 4.0 protocol and 4-in-1 output make this camera compatible with a range of HD-over-coax recorders without replacing the cable infrastructure.
- Choose a different model if: The installation site is being cabled fresh with Cat5e or Cat6, or the site already runs a full IP network. In those cases, an IP bullet camera with PoE will deliver greater flexibility, remote management capability, and access to IP-based analytics that this coax camera does not support.
- Choose a different model if: The scene requires a narrower field of view to resolve detail at distance, such as monitoring a long narrow lane or reading signage at the far end of a property. A longer focal length fixed lens or a varifocal bullet camera would be more appropriate for that application.
FAQs
- Can this camera be used with an existing analogue DVR?
The DS-2CE16H8T-IT3F requires a recorder that supports TVI 4.0, AHD, CVI, or at minimum CVBS. A standard analogue DVR that does not support any of these HD-over-coax standards will only receive a CVBS signal at standard definition. To take advantage of the full 5MP resolution, a recorder with TVI 4.0 support is required.
- What does the 4-in-1 output actually mean in practice?
The camera can output video in TVI, AHD, CVI, or CVBS format. The active format is selected through the OSD menu or via Up the Coax control from a compatible recorder. This means a single camera model can work across recorders from different brands, which is useful for multi-site installations or when replacing cameras on an existing mixed-brand system.
- How does EXIR differ from standard infrared illumination?
Standard IR arrays can produce a bright central hotspot that overexposes subjects at close range while the edges of the image remain underlit. EXIR uses a lens-based approach to spread the infrared output more evenly across the field of view, which reduces this hotspot effect and produces a more consistently lit night image across the 60m range.
- Is the camera suitable for permanent outdoor mounting in Australian conditions?
Yes. The IP67 rating provides complete protection against dust ingress and resistance to water immersion up to 1 metre for 30 minutes. In practice this means the camera handles heavy rain, outdoor humidity, and dust exposure without risk of moisture entering the housing, making it suitable for year-round outdoor installation across most Australian climates.
- What does Up the Coax control allow me to do?
Up the Coax (Hikvision-C) allows the camera’s OSD menu to be accessed and adjusted remotely from a compatible Hikvision recorder via the same coaxial cable carrying the video signal. This means installers can adjust settings such as WDR level, IR intensity, and image parameters without physical access to the camera after it has been mounted, which reduces time on site.
- Where can I find the datasheet and is technical support available?
The DS-2CE16H8T-IT3F datasheet is linked in the Additional Information section below. The camera is part of the Security Wholesalers product range, where technical pre-sales guidance is available for installers and integrators working through product selection or compatibility questions for their site.
Product Video Samples
Note: The following footage is representative 5MP sample footage and was not captured with this specific camera model.
Additional Information
