Product Overview
Wide-area monitoring across a retail floor, corporate lobby, or transport hub typically demands multiple cameras, complex cabling, and overlapping fields of view. The DS-2CD6395G1E-IVS addresses that challenge with a single ceiling-mounted fisheye device delivering full 360-degree panoramic coverage at 9MP resolution. Featuring a 1/1.8-inch progressive-scan CMOS sensor and a fixed 2 mm fisheye lens, it produces up to 3024 x 3024 imagery that can be dewarped into multiple views including panoramic, hemisphere, and PTZ-split modes. Equipped with Hikvision’s DeepinView AI engine, the camera supports people counting, heat-map generation, and intrusion detection for operational insight beyond basic recording. It also includes built-in IR illumination up to 15 m, a built-in microphone and speaker for two-way audio, onboard microSD storage up to 256 GB, and an IP67/IK10-rated housing rated from -30 degrees C to +60 degrees C, making it deployable in both controlled indoor environments and exposed outdoor positions.
Key Capabilities
9MP 360-Degree Fisheye Coverage
The fixed 2 mm fisheye lens paired with a 1/1.8-inch CMOS sensor delivers up to 3024 x 3024 resolution across a full panoramic scene. One ceiling-mounted device covers an entire room or open-plan floor area without the blind spots that multi-camera arrangements leave between fields of view.
Multi-Mode Dewarping
Raw fisheye imagery is corrected in-camera and via NVR or client software into panoramic, hemisphere, PTZ-split, and corridor views. Ceiling mount suits open-room 360-degree overhead views, while wall mount pairs with 180-degree panorama or PTZ-split modes for entrance and corridor applications.
DeepinView AI Analytics
Onboard DeepinView processing supports people counting, heat-map generation, and intrusion detection. Heat-map data highlights dwell-time patterns and high-traffic zones, giving retail, logistics, and facilities teams actionable intelligence without manual review of recorded footage.
Two-Way Audio
Both a built-in microphone and a built-in speaker are integrated into the housing, enabling real-time two-way voice communication. This supports visitor interaction, verbal deterrence, and audio-triggered event recording without requiring any external audio hardware.
IP67 and IK10 Rated Housing
Full dust and water ingress protection to IP67, combined with IK10 impact resistance, means the DS-2CD6395G1E-IVS can be surface-mounted on external walls, under canopies, or in high-traffic public areas where physical interference is a genuine risk.
Flexible Power and Local Storage
PoE (802.3af) support simplifies single-cable installation, while 12 V DC provides an alternative for locations without PoE infrastructure. A microSD/SDHC/SDXC slot accepts cards up to 256 GB for edge recording, providing continuity if the network recorder becomes temporarily unavailable.
Best For
- Single-Point Wide-Area Coverage: Ceiling-mounted deployment in large open spaces where one device must cover an entire floor area without blind-spot gaps between multiple camera fields of view.
- Retail and Operational Analytics: Environments requiring heat-map data and people counting alongside video surveillance, such as retail floors, supermarket aisles, or exhibition spaces tracking visitor movement and dwell time.
- Lobby and Reception Monitoring with Audio: Corporate or institutional reception areas where two-way audio allows security staff to communicate with visitors directly through the camera without secondary intercom hardware.
- Exposed Outdoor Positions: Canopy undersides, building soffits, or outdoor assembly areas where IP67 weather resistance and IK10 vandal resistance are required alongside panoramic coverage.
- Installations Prioritising Camera Count Reduction: Projects where reducing the number of devices, cable runs, and NVR channels is a priority, as the fisheye format replaces several standard fixed cameras with a single unit.
Why Choose the DS-2CD6395G1E-IVS
A standard fixed camera at 9MP covers a defined angle and produces one stream. The DS-2CD6395G1E-IVS produces a 3024 x 3024 fisheye stream that dewarps into multiple concurrent views from a single ceiling or wall position, reducing channel count, cabling costs, and installation time on large-floor projects. What separates it from a basic fisheye unit is the DeepinView AI layer: people counting and heat-map analytics are processed onboard, so the camera produces operational data as well as recorded footage. The IK10-rated housing and -30 to +60 degree C operating range extend its reach to outdoor and semi-exposed positions that a standard indoor fisheye could not handle. Two-way audio via the integrated microphone and speaker adds a communication function without secondary hardware. Available through Security Wholesalers, the DS-2CD6395G1E-IVS suits integrators and end users who need broad coverage, intelligent analytics, and durable construction from one device.
Buyer Decision Tips
Mount Position Determines Useful View Mode: Ceiling mounting produces the most useful 360-degree overhead coverage for open rooms and retail floors. Wall mounting redirects the fisheye lens horizontally, which suits corridors, entrance zones, and perimeter walls but limits the effective vertical panorama. Decide your mount position before installation, as the dewarp mode selection in your NVR or VMS should match the physical mount orientation to avoid distorted or unusable sub-streams.
IR Range Relative to Room Size: The built-in IR illumination reaches approximately 15 m, which is adequate for smaller rooms, corridors, and covered outdoor areas. In large warehouse floors or open atria exceeding 15 m radius from the camera, supplementary lighting will be needed for usable night-time imagery across the full panoramic scene. Plan mounting height between 2.5 m and 4 m to balance coverage radius and IR effectiveness.
Key Features & Technical Specifications
| Model |
DS-2CD6395G1E-IVS |
| Camera Type |
9MP DeepinView Fisheye Network Camera |
| Image Sensor |
1/1.8-inch progressive-scan CMOS |
| Max Resolution |
3024 x 3024 |
| Lens |
Fixed 2 mm fisheye (360-degree field of view) |
| IR Illumination Range |
Up to approximately 15 m |
| AI Analytics |
DeepinView: people counting, heat-map generation, intrusion detection |
| Audio |
Built-in microphone and built-in speaker (two-way audio) |
| Video Compression |
H.265+, H.265, H.264+, H.264 |
| Local Storage |
microSD/SDHC/SDXC up to 256 GB |
| Ingress Protection |
IP67 |
| Vandal Resistance |
IK10 |
| Power Supply |
PoE 802.3af / 12 V DC |
| Operating Temperature |
-30 degrees C to +60 degrees C |
| Dimensions |
Diameter 149 mm x 50 mm |
| Weight |
Approximately 800 g |
Ideal Use Cases
Retail Floors and Supermarkets
Ceiling-mounted above product aisles or checkout zones, the DS-2CD6395G1E-IVS provides a single overhead panoramic view of the entire floor area. Heat-map analytics identify the highest-traffic zones and dwell-time patterns, giving store managers both security footage and customer flow data from one device.
Corporate and Hotel Lobbies
A single ceiling-mounted unit eliminates the blind spots that conventional fixed cameras leave in open lobby spaces. The built-in two-way audio allows reception or security staff to communicate directly with visitors through the camera, reducing the need for a separate intercom at unstaffed entry points.
Warehouses and Distribution Centres
Mounted on structural columns or overhead racking, the fisheye format covers large floor areas and loading bay zones from fewer camera positions. People counting analytics support occupancy tracking and operational compliance without a separate sensor system.
Transport Hubs and Public Waiting Areas
Station concourses, bus terminals, and airport waiting zones require coverage of large, constantly shifting crowds. The 360-degree fisheye view tracks movement across the full scene, while intrusion detection flags unauthorised access to restricted areas beyond platform barriers or service zones.
Education Campuses and Assembly Areas
Mounting the DS-2CD6395G1E-IVS in hall ceilings or outdoor canopy soffits covers assembly areas, dining halls, and covered walkways with one device. IK10 impact resistance protects the unit in environments where physical contact with fixtures is common.
Outdoor Canopies and Semi-Exposed Positions
The IP67 weather rating and operating range down to -30 degrees C make this camera suitable for undercover outdoor positions such as building entrance canopies, covered car park entries, and outdoor event structures where a weatherproof panoramic unit is required.
Choosing the Right Model
- Choose this model if: You need to cover a large open area from a single camera position, require onboard AI analytics including heat mapping and people counting, and want two-way audio integrated without additional hardware. The IK10/IP67 rating also makes it suitable where vandal resistance and outdoor exposure are factors.
- Choose a different model if: Your site requires IR coverage beyond 15 m in pitch-dark conditions, as the built-in illuminators will not reach across a large unlit warehouse floor. A standard fixed lens camera with longer-range IR would be more appropriate for those distances. Similarly, if your monitoring requirement is a defined narrow angle rather than a full panoramic scene, a conventional turret or bullet camera will deliver higher pixel density across that specific zone without the fisheye distortion correction overhead.
FAQs
- What resolution does the DS-2CD6395G1E-IVS produce, and does it stay sharp after dewarping?
The camera captures at up to 3024 x 3024 pixels using a 1/1.8-inch CMOS sensor. Dewarping a 9MP fisheye source into multiple sub-streams still leaves considerably more pixel detail per view than a standard 2MP or 4MP fixed camera would provide. Detail retention across dewarped views is one of the practical reasons for choosing a high-resolution fisheye over a lower-resolution equivalent.
- Which mount orientation works best for ceiling versus wall positions?
Ceiling mounting points the fisheye lens directly downward, producing the most even 360-degree overhead view of the space below. Wall mounting redirects the lens horizontally, which is better suited to corridors, entrance approaches, and perimeter walls but reduces the effective vertical coverage angle. The dewarp mode selected in your NVR or VMS client should match the physical mount orientation to produce a correctly oriented panoramic or PTZ-split output.
- Does the camera support two-way audio out of the box?
Yes. The DS-2CD6395G1E-IVS includes both a built-in microphone and a built-in speaker within the housing. No external audio hardware is required. Two-way communication is available through compatible Hikvision NVRs or the iVMS-4200 client software when the camera is connected to the network.
- What analytics does the DeepinView engine support on this camera?
The onboard DeepinView AI engine processes people counting, heat-map generation, and intrusion detection directly on the camera without requiring a separate analytics server. Heat-map data is accumulated over configurable time periods and exported via the camera’s web interface or compatible VMS software, making it useful for retail analysis, facilities management, and occupancy reporting.
- How far does the built-in IR reach, and is it sufficient for outdoor use at night?
The integrated IR illuminators are rated to approximately 15 m. This is adequate for enclosed rooms, covered walkways, canopy undersides, and lobbies. For larger outdoor areas without supplementary lighting, the 15 m range may not fully illuminate the complete panoramic scene. In those cases, adding external IR flood illuminators to the installation will extend usable night-time coverage across the full fisheye field of view.
- Can the camera record locally if the NVR goes offline?
Yes. The DS-2CD6395G1E-IVS includes a microSD/SDHC/SDXC card slot supporting cards up to 256 GB. When configured for edge recording, the camera will write footage to the local card during a network or NVR outage and resume uploading or syncing when connectivity is restored, depending on your NVR or VMS configuration.
- Is this camera available in Australia, and where can it be purchased?
The DS-2CD6395G1E-IVS is part of the Security Wholesalers range and is available for purchase through Security Wholesalers, which supplies Hikvision cameras and accessories to security installers and integrators across Australia. A datasheet is linked in the Additional Information section below for specification verification prior to ordering.
Product Video Samples
Additional Information
Hikvision Warranty
3-Year Manufacturer Warranty
All Hikvision IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty and authorised dealer partner support.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit www.securitywholesalers.com.au/terms-and-conditions
Official Hikvision Partner for 2026
Authorised Hikvision Dealer Partner for 2026
As a Trusted Hikvision Dealer Partner and Hikvision Authorised Store, SecurityWholesalers.com.au is more than just a reseller — we’re a nationally recognised partner delivering genuine Hikvision solutions, backed by expert technical support and deep industry knowledge.
Our team supports systems across all major sectors — including residential homes, commercial businesses, schools, government infrastructure, warehouses, and local councils. When you choose us, you’re selecting a Hikvision-certified partner with a proven track record in performance, reliability, and customer satisfaction.
- Official Hikvision Product Support
Get access to genuine Hikvision technical resources and support, delivered by trained professionals who work with these systems daily.
- Comprehensive System Assistance
From product selection to setup, configuration, remote access support, and firmware upgrades — we offer step-by-step guidance to ensure your system is optimal.
- Reliable After-Sales Service
We provide continued support for configuration, troubleshooting, and warranty claims. Whether you’re a first-time user or a seasoned installer, we ensure your Hikvision system operates flawlessly.
- Genuine Products & Fast Dispatch
All Hikvision stock is sourced from authorised Australian distributors and shipped promptly from our local warehouse. No delays, no grey-market risks, no international return hassles.
- Industry-Wide Trust
Our clients range from councils and schools to enterprise businesses and security professionals — all trusting us for exceptional service, product reliability, and expert advice.
- Real-World Security Expertise
Unlike generic electronics stores, we specialise in security. Our team includes qualified installers and consultants offering tailored recommendations based on real-world experience — not just inventory lists.
- 3 Years Manufacturer Warranty ensuring your security system remains reliable for years to come.
At SecurityWholesalers.com.au, we’re committed to more than just competitive pricing — we offer true partnership and protection through every stage of your Hikvision journey. We’re not your average security equipment supplier — choose the team that industry professionals trust.
Free Express Shipping*
Shipping & Delivery
At SecurityWholesalers.com.au, we prioritise fast and reliable delivery across Australia. Whether you’re ordering for home or business, you can expect professional service, tracked shipments, and speedy fulfilment — every time.
✔ FREE Shipping Australia-Wide on Orders Over $100
Enjoy free express shipping on all orders over $100. For orders under $100, a flat rate of $20.00 applies. We proudly offer nationwide delivery using trusted courier partners for your peace of mind.
✔ Same-Day Despatch for Fast Delivery
Place your order before 10am (Sydney time) on any business day and we’ll do our best to despatch it the same day, subject to stock availability. We receive new stock into our warehouse every second day, so we always strive to ship the freshest arrivals directly to you. Most orders are received within 1-3 business days via the Express Post network, covering Australian capital cities and major metro areas. Deliveries to regional locations typically take 2–5 business days.
For urgent orders, please contact our customer care team to expedite the delivery and ensure that we can get your equipment to your project site on time.
✔ Reliable Couriers You Can Trust
We primarily use StarTrack Express for fast, secure shipping. Depending on warehouse availability, we may also use Toll or Couriers Please — whichever gets your order to you fastest.
✔ Order Processing & Tracking
Orders are processed Monday to Friday (excluding public holidays) and shipped within 24 hours. Tracking numbers are emailed to you by 11pm on the day your order ships. You can monitor your delivery through:
✔ Missed a Delivery?
If you’re not home at the time of delivery, your parcel will be left in a secure location if considered safe. If not, a collection card will be left and the parcel will be held at the nearest depot or post office for pickup.
✔ Need Help?
If you haven’t received your order within 4 business days, please contact us with your full name and order number. We’ll follow up promptly. Also, be sure to check your email spam folder for shipping notifications or attempted delivery messages.
Trade Discounts Available
Want even more savings? Register instantly for a Trade Account and, once approved, you’ll gain access to exclusive discounts on a wide range of products. It’s our way of supporting installers, resellers, and industry professionals with better pricing and priority service.
