Product Overview
Covering perimeter approaches, loading docks, and car park entries demands a camera that can separate genuine threats from environmental noise. The DS-2CD2T66G2-2I is a 6MP outdoor EXIR bullet camera powered by Hikvision’s AcuSense Gen 2 deep learning technology, which classifies detected motion as either a person or a vehicle and discards triggers caused by animals, wind-blown foliage, or other irrelevant movement. Featuring a 2.8mm fixed lens with a 105.1-degree horizontal field of view, it covers wide outdoor approaches from a wall or eave mount. Equipped with DarkFighter technology and a 60m EXIR night vision range, it maintains usable detail after dark without supplementary lighting. Built to IP67 standards, it withstands rain, dust, and temperature extremes common to Australian outdoor installations. It also supports H.265+ compression and local microSD recording up to 128GB, giving operators flexible storage options without full network dependency.
Key Capabilities
AcuSense Gen 2 Human and Vehicle Classification
Deep learning algorithms classify motion events as human or vehicle targets, filtering out animals and environmental movement. Alarm events are tagged and searchable in recorded footage, cutting the time required to locate specific incidents during a review.
60m EXIR Night Vision Range
The EXIR array delivers even IR illumination across the full 60m range, avoiding the overexposed centre and dark edges common to standard IR LEDs. This is practical for monitoring long driveways, fence lines, and open yards where perimeter coverage extends well beyond a building wall.
6MP Resolution at 20fps
Recording at 3072 x 2048 pixels provides sufficient detail to identify individuals and read vehicle registration plates within the camera’s DORI recognition range of 15.7m, supporting post-incident evidence review across commercial and industrial sites.
DarkFighter Low-Light Imaging
DarkFighter technology produces colour-rich images in near-darkness by maximising sensor light sensitivity. Combined with 120dB wide dynamic range, the camera handles mixed lighting scenes such as car park entries lit by a single overhead light alongside ambient darkness.
IP67 Weatherproof Bullet Housing
The bullet form factor allows direct wall or eave mounting with a fixed directional angle, suited to monitoring known outdoor approaches. IP67 certification ensures the housing withstands full dust ingress protection and sustained water exposure, keeping it operational through Australian summer storms and coastal conditions.
Best For
- Perimeter Fence Lines and Entry Points: The 60m EXIR range and 105-degree horizontal FOV cover wide outdoor approaches from a fixed wall mount, making it well suited to monitoring gates, fence lines, and site boundaries where consistent night-time coverage is required.
- Car Parks and Loading Docks: AcuSense Gen 2 filters vehicle and pedestrian motion events separately, allowing operators to configure targeted alerts for after-hours vehicle or person activity without constant false triggers from passing headlights or wind movement.
- Industrial Yards and Warehouses: The IP67-rated bullet housing tolerates dust, grime, and heavy rain typical of industrial outdoor environments. The visible bullet profile also provides a deterrence presence at monitored locations.
- Sites Where Storage Efficiency Matters: H.265+ compression significantly reduces file size compared to H.264 at equivalent quality, lowering NVR storage requirements and extending recording retention periods without adding hardware.
Why Choose the DS-2CD2T66G2-2I
The DS-2CD2T66G2-2I goes beyond standard outdoor bullet cameras by combining AcuSense Gen 2 classification with DarkFighter sensitivity in a single IP67-rated housing. A basic bullet camera records movement and triggers alerts indiscriminately. This model uses deep learning to distinguish people and vehicles from irrelevant triggers, then tags those events so they are directly searchable during footage review. The practical outcome is fewer wasted hours of manual playback and more targeted incident response. The 6MP sensor captures enough detail at the DORI recognition distance of 15.7m to support post-incident identification, while the 60m EXIR range keeps approaches visible well after dark. The combination of PoE and 12VDC power options also gives installers cabling flexibility on existing sites. The DS-2CD2T66G2-2I is available at Security Wholesalers and includes a 3-year warranty with local support.
Buyer Decision Tips
Lens and DORI Range: The 2.8mm fixed lens gives a wide 105-degree horizontal FOV suited to covering broad outdoor areas from a single mounting point. If your primary goal is to identify individuals at distances beyond 15.7m or to monitor a long narrow approach such as a driveway or corridor from a distance greater than 20m, consider a model with a longer focal length lens. The 2.8mm version is best used where the camera is positioned within 15-20m of the area requiring person-level detail.
Storage Planning: The DS-2CD2T66G2-2I supports local microSD recording up to 128GB as a standalone fallback option. For continuous multi-camera recording, pair it with a compatible Hikvision NVR. H.265+ compression reduces storage consumption significantly compared to older H.264 systems, so factor this in when sizing drives if you are upgrading an existing installation.
Key Features & Technical Specifications
| Model |
Hikvision DS-2CD2T66G2-2I |
| Resolution |
6MP (3072 x 2048) |
| Frame Rate |
Up to 20fps at 6MP |
| Lens Type |
Fixed focal lens |
| Focal Length |
2.8mm |
| Field of View |
Horizontal 105.1°, Vertical 53.4°, Diagonal 128.6° |
| DORI Distances |
Detect 78.6m, Observe 31.2m, Recognise 15.7m, Identify 7.9m |
| IR Night Vision Range |
Up to 60m (EXIR) |
| Analytics |
AcuSense Gen 2 – human and vehicle deep learning classification |
| Low-Light Technology |
DarkFighter |
| Wide Dynamic Range |
120dB |
| Image Enhancements |
3D DNR, BLC, HLC |
| Video Compression |
H.265+, H.265, H.264+, H.264 |
| Local Storage |
MicroSD up to 128GB |
| Power Supply |
12VDC, PoE IEEE 802.3af Class 3 |
| Weather Rating |
IP67 |
| Housing Type |
Outdoor bullet |
Ideal Use Cases
Car Park Monitoring
AcuSense Gen 2 classifies vehicle movement separately from pedestrian activity, allowing targeted after-hours alerts for vehicle intrusion. The 105-degree FOV from a wall mount can cover a wide bay area from a single camera position.
Industrial Perimeter Fencing
The 60m EXIR night vision range and IP67-rated bullet housing make this camera appropriate for fence line and boundary monitoring on industrial sites where lighting is limited and the environment is dusty or wet.
Loading Dock and Warehouse Entry
Mounted above loading dock doors or roller shutters, the DS-2CD2T66G2-2I monitors after-hours access with human classification alerts. DarkFighter keeps images colour-accurate under low-level dock lighting.
Commercial Building Exterior
Wall or eave-mounted on a commercial building exterior, the bullet housing directs coverage along pathways, alleyways, and entry approaches. The searchable AcuSense event log speeds up footage review after a reported incident.
Construction Site Boundaries
On construction sites where temporary power or cabling is limited, PoE delivery from a single Cat5e/Cat6 cable simplifies installation. IP67 protection handles dust and rain exposure throughout the build period.
Choosing the Right Model
- Choose this model if: You need a 6MP outdoor bullet camera with AcuSense Gen 2 human and vehicle classification, 60m EXIR night vision, and IP67 weatherproofing for perimeter, car park, or industrial boundary monitoring where wide-area coverage from a single fixed point is the priority.
- Choose a different model if: Your site requires active deterrence with a built-in strobe and audible warning to challenge intruders on detection. You may also want a longer focal length fixed lens or a varifocal bullet if your primary coverage zone is a narrow approach at distances beyond 20m, where the 2.8mm FOV captures more scene width than is practical for subject identification.
FAQs
- What does AcuSense Gen 2 actually do differently from standard motion detection?
Standard motion detection triggers on any pixel change, including leaves, shadows, and animals. AcuSense Gen 2 uses a deep learning model trained to identify human and vehicle shapes specifically. When a trigger matches one of those categories, the camera logs a classified alarm event that is searchable in the NVR timeline, so operators can filter for person or vehicle events without scrubbing through hours of irrelevant footage.
- What is the effective night vision range, and how does EXIR differ from standard IR?
The DS-2CD2T66G2-2I has an EXIR range of up to 60m. Standard IR arrays concentrate brightness in the centre of the frame, causing overexposure close to the camera and dark edges further away. EXIR uses a structured lens and LED arrangement to distribute IR illumination more evenly across the frame, producing consistent brightness from near to far within that 60m range.
- How wide is the coverage area with the 2.8mm lens?
The 2.8mm fixed lens produces a 105.1-degree horizontal field of view. At a mounting height of around 3m, this covers a broad area in front of the camera. The DORI recognition distance is 15.7m, meaning a person can be identified at up to roughly 15-16m from the lens. Beyond that distance, detection is still possible but image detail reduces progressively toward the 78.6m detect threshold.
- Can the camera record locally without a network recorder?
Yes. The DS-2CD2T66G2-2I supports a microSD card up to 128GB for local on-camera recording. This functions as a standalone fallback or as an edge storage option in addition to a connected NVR. For continuous long-term recording across multiple cameras, a dedicated NVR with sufficient channel capacity and storage is the more practical solution.
- Does this camera support PoE, and what standard does it use?
The DS-2CD2T66G2-2I is powered via PoE to IEEE 802.3af Class 3, which is the most widely supported PoE standard. This means a standard PoE switch or PoE NVR with 802.3af ports will power the camera over a single Cat5e or Cat6 cable, removing the need for a separate 12VDC power supply at the camera location. It also accepts 12VDC if PoE is not available.
- Is this camera suitable for mounting on an exposed outdoor wall in a coastal or high-humidity environment?
The IP67 rating certifies full dust ingress protection and protection against sustained water immersion, which covers rain, hose-down situations, and high-humidity coastal environments. The bullet housing is designed for wall or eave mounting with the lens pointed downward at an angle, which also helps prevent water accumulation on the lens face. The DS-2CD2T66G2-2I is part of the Security Wholesalers range and carries a 3-year warranty covering defects under normal installation conditions.
Product Video Samples
Additional Information
Specifications Summary
3 Year Warranty
All Hikvision IP cameras and recording device (NVR’s/DVR’s) are covered by a 3 year back-to-base manufacturer warranty.
(Note disk drives limited to 1 one year)
Our warranty is limited to the replacement of faulty items or parts and does not include damage due to incorrect fitting of parts or accessories.
Consumer Law, Return, Refund and Exchange Policy:
(a) ACL: Certain legislation including the Australian Consumer Law (ACL) in the Consumer and Competition Act 2010 (Cth), and similar consumer protection laws and regulations may confer you with rights, warranties, guarantees and remedies relating to the provision of goods or services to you by us via the Site which cannot be excluded, restricted or modified. Our liability is governed solely by the ACL and these Terms.
(b) Goods: If you are a consumer as defined in the ACL, the following notice applies to you: “Our goods come with warranties and guarantees that cannot be excluded under the Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or a refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure
(c) Our warranties: To the extent permitted by law, we exclude all express and implied warranties, and all material and work is provided to you without warranties of any kind, either express or implied. We expressly disclaim all warranties including but not limited to implied warranties of merchantability and fitness for a particular purpose.
(d) Manufacturer warranties: Certain products, including particular models of IP security cameras and DVR/NVR equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is in addition to but may overlap with any rights and remedies you may have under applicable law, including any Consumer Guarantees. If you are not considered a “consumer” within the meaning of the ACL, the manufacturer’s warranty may be your sole remedy. You should check the manufacturer’s warranty, as many manufacturers’ warranties do not apply in a business or commercial setting. Please contact the manufacturer if you would like to make a claim under the manufacturer’s warranty.
(e) Repair, replacement or a refund: If you wish to seek repair, replacement or a refund for a product, please contact us and we will explain the requirements to you. This may include you providing evidence of the faulty product to us.
(f) Refund: You are not entitled to a refund for change of mind. If you are entitled to a refund, we will only give you the refund once evidence of faulty product is received by us, or we have received the product at our warehouse and inspected it and assessed whether it is eligible for a refund under these Terms. Any refund we make will be by the same payment method used to purchase the product.
(g) Installed: Subject to this clause, we will not accept for return any product that has been used, connected, installed, attempted to be connected or installed, or if your product is custom-made or is a special buy product.
(h) Packaging: You must adequately package any product you are returning for our collection to ensure that it is not damaged during return delivery to our warehouse. You are also responsible for arranging the return delivery and the costs involved.
(i) Duty of care: You have a duty of care for the product while it is in your possession. If you damage products, then subsequently return the products, you may be liable to pay to repair the product to its original condition. In these circumstances, where a repair is not economically viable, no refund will be made.
More Terms & Conditions here – https://www.securitywholesalers.com.au/terms-and-conditions/
