-18%

Hikvision DS-2CD2766G2T-IZS-BNC-BLK 6 MP AcuSense Motorised Varifocal Dome w/ BNC Output 2.8-12 mm Black

$415.74$507.00
SAVE $91.26FREE DELIVERYWARRANTY GUARANTEED
✔ Dedicated 5★ Customer Care Team   ✔ Fast & Responsive Tech Support

Hikvision DS-2CD2766G2T-IZS-BNC-BLK | 6 MP | AcuSense | Motorised Varifocal Dome | BNC Output | Black

The Hikvision DS-2CD2766G2T-IZS-BNC-BLK delivers a 6 MP motorised varifocal dome camera designed for installations requiring both IP network connectivity and analogue BNC video output for quick on-site verification. Featuring a 2.8-12 mm motorised zoom lens, the camera allows remote focus and zoom adjustment without the need for manual lens tuning. Built with AcuSense technology, it classifies detected motion as human or vehicle to reduce false alarms from irrelevant triggers. This makes it suitable for commercial sites, multi-entrance facilities, and installations where both IP and analogue monitoring are required.

Key Features

  • 6 MP Resolution: Captures high-detail footage at 3200 x 1800 for clear identification of people and vehicles.
  • Motorised Varifocal Lens: 2.8-12 mm lens with remote zoom and focus adjustment for flexible field-of-view configuration.
  • AcuSense Human/Vehicle Classification: Filters motion events by target type to minimise false alarm notifications.
  • BNC Analogue Output: Onboard BNC connector provides a local analogue video signal for direct monitor connection or on-site testing.
  • IR Night Vision: Up to 40 m infrared night vision range for reliable low-light and no-light surveillance.
  • Weatherproof Construction: Rated for outdoor use with protection against dust and water ingress.
6MP
40m Night Vision
Motorised Lens
Varifocal
Weatherproof
False Alarm Filter
Mobile Viewing

 

Additional Information

DS-2CD2766G2T-IZS-C Datasheet

$415.74 $507.00 inc GST +3 Year Warranty & Support

Product Overview

Combining AcuSense deep-learning analytics with a dedicated analogue BNC test output, the DS-2CD2766G2T-IZS-BNC-BLK is a 6MP motorised varifocal dome camera built for commercial ceiling and wall installations where both imaging performance and installation speed matter. Featuring a 1/2.4-inch progressive-scan CMOS sensor delivering 3200 x 1800 resolution, it captures fine detail across large indoor and outdoor areas. Equipped with a motorised 2.8-12 mm varifocal lens, the field of view can be adjusted remotely via NVR or web interface without physically handling the camera after mounting. The BNC output is a practical installer tool, allowing quick lens alignment on a standard analogue test monitor before the IP network is commissioned. Built with IP67 weatherproofing and IK10 vandal resistance, it suits covered outdoor positions such as building entrances, car park overheads, and warehouse ceilings. The black housing variant is suited to dark or architectural environments where a white dome would stand out. This model is well suited to commercial and institutional projects requiring dependable classification-based detection and flexible framing at install time.

Key Capabilities

BNC Analogue Test Output

The BNC output lets installers connect a standard analogue test monitor directly to the camera during setup, confirming the lens angle and scene framing without establishing a full network connection. This reduces setup time on large commercial jobs significantly.

Motorised 2.8-12 mm Varifocal Lens

The motorised varifocal lens covers a horizontal field of view from 106 degrees at wide end to 35 degrees at telephoto, giving installers the flexibility to frame wide car park overheads or tighter entry-point shots from the same camera model, adjusted remotely after mounting.

6MP Resolution at 3200 x 1800

Six megapixel imaging on a 1/2.4-inch CMOS sensor provides enough pixel density to extract useful detail from subjects at distance. At wider zoom settings, a single camera can cover areas that would otherwise require multiple lower-resolution units.

AcuSense Human and Vehicle Classification

AcuSense deep-learning analytics filters motion events by classifying detected objects as humans or vehicles rather than triggering on general motion. This reduces the volume of irrelevant alerts generated overnight in outdoor commercial environments where foliage, weather, or small animals are common triggers.

IR Night Vision to 40 m

With a minimum illumination of 0.003 lux in colour mode and 0 lux with IR active, the camera maintains usable imaging at night. The IR array extends to 40 m, covering the approach distances typical of building entrances, car park lanes, and covered walkways.

IP67 Weatherproofing and IK10 Vandal Resistance

The IP67 rating prevents dust ingress and withstands water exposure at exposed outdoor positions. The IK10 impact rating means the dome casing resists deliberate physical force, making this camera appropriate for public-facing ceilings, car park columns, and building exteriors where tampering is a realistic concern.

Best For

  • Commercial Installation Projects: The BNC test output and motorised varifocal lens make this camera well suited to multi-camera commercial installs where fast alignment and remote field-of-view adjustment reduce time on ladders after mounting.
  • Car Parks and Building Entrances: The IP67 and IK10 ratings combined with 40 m IR range make it practical for covered outdoor positions where the dome needs to resist both weather and physical interference.
  • Sites Requiring Classification-Based Detection: AcuSense human and vehicle classification is well matched to overnight commercial monitoring where reducing false alarm volume from general motion is a priority for operators and monitoring centres.
  • Environments Requiring a Discreet Finish: The black dome housing blends into dark ceiling surfaces, architectural metalwork, and contemporary building interiors where a white camera would attract visual attention or conflict with the fitout.

Why Choose the DS-2CD2766G2T-IZS-BNC-BLK

The DS-2CD2766G2T-IZS-BNC-BLK stands apart from standard 6MP dome cameras because of its BNC analogue output, a feature absent from most IP-only dome models at this resolution. For installers commissioning multiple cameras across a site, the ability to verify lens angle on a portable test monitor before locking off the mount bracket is a practical time-saver. The motorised 2.8-12 mm varifocal lens extends that flexibility further, allowing zoom and focus to be dialled in remotely after the camera is secured. AcuSense classification adds a layer of intelligence that a basic motion detection camera cannot match, filtering events down to human and vehicle detections that are actionable. The IK10 vandal-resistance rating and IP67 weather sealing mean it can be placed in outdoor positions that would compromise a standard indoor dome. Available through Security Wholesalers, the DS-2CD2766G2T-IZS-BNC-BLK is backed by H.265+ compression to keep storage load manageable across multi-channel NVR deployments.

Buyer Decision Tips

BNC Variant vs. Standard Model: The BNC output on this model is specifically intended as an installation and test aid, not a secondary recording output. Final video recording and live monitoring run through the IP network connection only. If your project does not involve site testing with analogue test monitors, a non-BNC variant of the same camera will deliver identical IP performance. Choose this BNC variant when your installation workflow involves portable analogue monitors for lens alignment, or when maintenance access to camera views without network login is a regular requirement.

Motorised Zoom and Mounting Height: The 2.8-12 mm motorised varifocal range works best when the camera is mounted between 2.5 m and 4 m to achieve practical DORI distances for detection and identification. At wider zoom settings from 2.8 mm the camera covers broad areas such as car park bays or warehouse floors. At the 12 mm telephoto end it narrows to a focused corridor or entry channel. Plan the mounting position and target scene before finalising the bracket and cable length, as the motorised adjustment compensates for framing but not for a fundamentally unsuitable mounting location.

Key Features & Technical Specifications

Image Sensor 1/2.4-inch Progressive Scan CMOS
Max Resolution 3200 x 1800 (6MP)
Lens Type Motorised varifocal 2.8-12 mm, F1.6
Field of View (Horizontal) 106 degrees (2.8 mm) to 35 degrees (12 mm)
Field of View (Vertical) 56 degrees (2.8 mm) to 20 degrees (12 mm)
Minimum Illumination 0.003 lux (colour) at F1.6, 0 lux with IR active
IR Range Up to 40 m
WDR 120 dB True WDR
Video Compression H.265+, H.265, H.264+, H.264
Smart Analytics AcuSense human and vehicle classification
BNC Output Analogue video output for installation and test purposes
Audio Built-in microphone, audio input/output port
Ingress Protection IP67
Impact Protection IK10
Power Supply 12 V DC (±25%) or PoE IEEE 802.3af Class 3
Power Consumption Max 9.5 W
Dimensions 140 mm diameter x 127 mm
Weight Approx. 900 g
Mounting Options Wall, ceiling, pendant, or junction box
Housing Colour Black

Ideal Use Cases

Commercial Car Parks

The IP67 and IK10 ratings make this dome suitable for car park column and ceiling positions exposed to weather and potential impact. AcuSense vehicle classification assists in filtering out irrelevant motion events from parked cars shifting in wind or light reflections.

Building Entrances and Lobbies

Ceiling mounting above entry doors benefits from the motorised zoom to frame the entry channel precisely. The 120 dB True WDR handles the backlight challenge common at glass entry doors, where exterior daylight behind subjects would otherwise wash out facial and clothing detail.

Warehouse and Industrial Interiors

Mounted from ceiling height in warehouses, the 2.8-12 mm varifocal range can be adjusted to cover broad storage bay aisles or narrowed to watch loading dock access points. The black dome finish suits industrial ceiling environments where white housings look out of place.

Multi-Site Commercial Installs

Installers commissioning multiple cameras across large commercial sites benefit directly from the BNC test output, using a portable analogue monitor to confirm each camera’s angle before closing off cable penetrations and locking brackets, avoiding repeat access visits.

Covered Outdoor Perimeters

Under-eave and covered walkway positions that experience periodic rainfall and condensation are served well by the IP67 seal. The 40 m IR range covers typical perimeter approach distances at night, and AcuSense human classification focuses alert generation on genuine intrusion events rather than environmental triggers.

Choosing the Right Model

  • Choose this model if: You need a 6MP outdoor dome with motorised varifocal framing flexibility, AcuSense classification to reduce false alerts, and a BNC test output to speed up lens alignment during installation or maintenance.
  • Choose this model if: Your installation environment has dark or architectural ceilings where the black housing blends in better than a white dome, or where a white finish would be visually inappropriate for the space.
  • Choose a different model if: Your project requires full-colour night imaging rather than IR-based black-and-white low-light performance. A full-colour dome variant with a white-light supplement would be a better match for environments where colour retention at night is critical for identification purposes.
  • Choose a different model if: The BNC test output is not a workflow requirement and cost is a constraint. An IP-only dome at the same resolution without the BNC output may be available at a lower price point if the analogue test function adds no value to your specific installation process.

FAQs

  1. What is the BNC output on the DS-2CD2766G2T-IZS-BNC-BLK actually used for?
    The BNC output provides an analogue video signal from the camera that can be viewed on a standard test monitor or portable LCD screen. It is intended as an installation and maintenance aid, allowing the installer to verify the camera’s field of view, lens position, and aim before the IP network is set up. It does not carry recorded footage and should not be connected to an analogue DVR as a primary recording feed.
  2. How does the motorised varifocal lens get adjusted after installation?
    The 2.8-12 mm motorised lens can be adjusted remotely through a compatible Hikvision NVR’s camera management interface or through the camera’s own web interface via a browser. This removes the need to physically access the camera after mounting to turn a manual zoom ring, which is particularly useful when the camera is installed at ceiling height or in a difficult-to-reach position.
  3. Does this camera work in complete darkness?
    Yes. The DS-2CD2766G2T-IZS-BNC-BLK switches to IR mode at 0 lux, meaning it can operate with no ambient light at all. The IR array illuminates to a range of up to 40 m, producing monochrome imaging in full darkness. In low-light conditions above 0.003 lux the camera retains colour imaging at F1.6 aperture before transitioning to IR.
  4. What does AcuSense classification do differently from standard motion detection?
    Standard motion detection triggers on any pixel change within the detection zone, including wind-blown foliage, rain, insects crossing the sensor, or headlight sweeps. AcuSense applies deep-learning analysis to classify moving objects as humans or vehicles before generating an alert. Events triggered by non-human, non-vehicle motion are filtered out, which reduces the volume of notifications sent to monitoring systems or operators significantly on busy outdoor sites.
  5. Is the dome housing suitable for outdoor installation?
    Yes. The DS-2CD2766G2T-IZS-BNC-BLK carries an IP67 rating, meaning it is fully dust-tight and can withstand water immersion at shallow depth, covering all typical outdoor rain and wash-down scenarios. The IK10 impact rating confirms the dome casing resists up to 20 joules of impact force, which is sufficient for vandal-exposed positions on building exteriors, car park structures, and public-facing ceilings.
  6. What power options does this camera support?
    The camera accepts 12 V DC with a tolerance of plus or minus 25 percent, or Power over Ethernet via IEEE 802.3af Class 3, drawing a maximum of 9.5 W. PoE simplifies cabling on new installations by carrying both data and power over a single CAT5e or CAT6 cable run to the camera, while the 12 V DC option suits retrofits into existing cable infrastructure.
  7. Where can I find compatible mounting brackets for the DS-2CD2766G2T-IZS-BNC-BLK?
    Compatible mounting accessories for the DS-2766 series are listed on the product page, including wall mount, pendant, and pole mount bracket options suited to ceiling, wall, and structural column positions. Security Wholesalers stocks a range of Hikvision mounting brackets for this series, and the existing product page includes a bracket selection table to assist with choosing the correct fitting for your installation scenario.

Product Video Samples

Additional Information

Add Options

ImageNamePriceBuy
Hikvision Wall Mount Bracket DS-1473ZJ-155 to suit HIK-2CD27x5 Series Cameras$55.00 inc GST +3 Year Warranty & Support

Colour

Hikvision DS-1280ZJ-DM55 CCTV Camera Bracket$32.00 inc GST +3 Year Warranty & Support
Hikvision DS-1475ZJ-SUS Vertical Pole Mount Bracket to suit 26x5, 27x5 and 2Hx5 Series Cameras$57.00 inc GST +3 Year Warranty & Support
Hikvision DS-1476ZJ-SUS CCTV Camera Bracket$57.00 inc GST +3 Year Warranty & Support
Hikvision DS-1271ZJ-135 Pendant Mount Bracket to suit DS-27x2 Series Cameras$62.00 inc GST +3 Year Warranty & Support
SKU: DS-​2CD2766G2T‌-​IZS-​BNC-​BLK Category:

3 Years Warranty

All Hikvision IP cameras and recording device (NVR’s/DVR’s) are covered by a 3 year back-to-base manufacturer warranty.

(Note disk drives limited to 1 one year)

Our warranty is limited to the replacement of faulty items or parts and does not include damage due to incorrect fitting of parts or accessories.

Consumer Law, Return, Refund and Exchange Policy:
(a) ACL: Certain legislation including the Australian Consumer Law (ACL) in the Consumer and Competition Act 2010 (Cth), and similar consumer protection laws and regulations may confer you with rights, warranties, guarantees and remedies relating to the provision of goods or services to you by us via the Site which cannot be excluded, restricted or modified. Our liability is governed solely by the ACL and these Terms.
(b) Goods: If you are a consumer as defined in the ACL, the following notice applies to you: “Our goods come with warranties and guarantees that cannot be excluded under the Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or a refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure
(c) Our warranties: To the extent permitted by law, we exclude all express and implied warranties, and all material and work is provided to you without warranties of any kind, either express or implied. We expressly disclaim all warranties including but not limited to implied warranties of merchantability and fitness for a particular purpose.
(d) Manufacturer warranties: Certain products, including particular models of IP security cameras and DVR/NVR equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is in addition to but may overlap with any rights and remedies you may have under applicable law, including any Consumer Guarantees. If you are not considered a “consumer” within the meaning of the ACL, the manufacturer’s warranty may be your sole remedy. You should check the manufacturer’s warranty, as many manufacturers’ warranties do not apply in a business or commercial setting. Please contact the manufacturer if you would like to make a claim under the manufacturer’s warranty.
(e) Repair, replacement or a refund: If you wish to seek repair, replacement or a refund for a product, please contact us and we will explain the requirements to you. This may include you providing evidence of the faulty product to us.
(f) Refund: You are not entitled to a refund for change of mind. If you are entitled to a refund, we will only give you the refund once evidence of faulty product is received by us, or we have received the product at our warehouse and inspected it and assessed whether it is eligible for a refund under these Terms. Any refund we make will be by the same payment method used to purchase the product.
(g) Installed: Subject to this clause, we will not accept for return any product that has been used, connected, installed, attempted to be connected or installed, or if your product is custom-made or is a special buy product.
(h) Packaging: You must adequately package any product you are returning for our collection to ensure that it is not damaged during return delivery to our warehouse. You are also responsible for arranging the return delivery and the costs involved.
(i) Duty of care: You have a duty of care for the product while it is in your possession. If you damage products, then subsequently return the products, you may be liable to pay to repair the product to its original condition. In these circumstances, where a repair is not economically viable, no refund will be made.

More Terms & Conditions here – https://www.securitywholesalers.com.au/terms-and-conditions/

We make product support and ordering easy! Reach out to our help team :)
Trade Customers: Log In or Register to Unlock Even Better Prices.

Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)

Hikvision DS-2CD2766G2T-IZS-BNC-BLK 6 MP AcuSense Motorised Varifocal Dome w/ BNC Output 2.8-12 mm Black
$415.74 $507.00 inc GST +3 Year Warranty & Support