Product Overview
Please note: The DS-2CD2185G0-IMS is discontinued and is no longer manufactured. Stock may be limited.
Built for outdoor ceiling and wall mounting in environments where direct monitor connection is required, the DS-2CD2185G0-IMS is an 8MP fixed dome camera from Hikvision that includes a Micro HDMI (Type D) output for connecting directly to a compatible display without a recorder. This makes it a practical option for standalone viewing points, counters, reception desks, or small sites where a full NVR setup is not required. Featuring a 1/2.5″ progressive scan CMOS sensor with a 2.8mm fixed lens, it captures footage at 3840 x 2160 resolution at up to 20fps. Equipped with EXIR LED technology, it delivers up to 30m of IR illumination in low-light conditions. With a 120dB Wide Dynamic Range and 3D Digital Noise Reduction, it handles challenging lighting environments including backlit doorways and sun-facing entrances. Its IP67 weather-proof and IK10 vandal-resistant housing suits exposed outdoor installations.
Key Capabilities
Micro HDMI Direct Output
The Type D Micro HDMI output allows the DS-2CD2185G0-IMS to connect directly to a compatible CCTV monitor without a recorder. This is useful for point-of-sale counters, receptions, or standalone viewing applications where simplicity is a priority.
8MP 4K Resolution at 20fps
The 1/2.5″ CMOS sensor captures video at 3840 x 2160 resolution, delivering sharp detail across wide dome coverage areas. At 20fps this suits environments where detailed identification of individuals or objects is important rather than fast-motion tracking.
120dB Wide Dynamic Range
A 120dB WDR rating allows the camera to balance bright and dark zones within the same frame. This is especially relevant for dome installations near doorways, windows, or outdoor areas with significant contrast between sunlight and shadow.
30m EXIR Night Vision
High-performance EXIR LEDs provide up to 30m of infrared illumination with a built-in IR-cut filter that switches automatically between day and night modes. This supports consistent image capture across outdoor entrances and covered areas after dark.
IP67 and IK10 Rated Housing
The dome housing carries IP67 full weatherproofing and IK10 impact resistance, making it suitable for exposed outdoor mounting positions including eave soffits, building facades, and areas prone to deliberate tampering or accidental contact.
Best For
- Direct Monitor Viewing Without a Recorder: The Micro HDMI output allows connection to a compatible display for live viewing without requiring an NVR, useful for small standalone installations or supplementary monitor points.
- Outdoor Entrance and Doorway Monitoring: The IP67 and IK10-rated dome housing, combined with 120dB WDR, suits backlit entrances, doorways, and covered outdoor areas where both weather exposure and lighting contrast are factors.
- Low-Light Outdoor Positions: Up to 30m of EXIR infrared range supports monitoring of pathways, car parks, and perimeter areas after dark without requiring supplementary lighting.
- Network-Integrated Sites Requiring High Resolution: H.265+ compression with dual streaming and PoE support makes the camera compatible with existing network infrastructure while reducing storage and bandwidth overhead at 8MP resolution.
Why Choose the DS-2CD2185G0-IMS
The DS-2CD2185G0-IMS stands apart from standard 8MP dome cameras through its built-in Micro HDMI output, a feature rarely found on network cameras at this resolution. This allows a direct connection to a monitor for live feed display without any recorder or software, which fills a specific need in retail counters, small offices, and reception areas requiring a visible display. The IK10 rating confirms genuine vandal resistance rather than cosmetic durability, and the IP67 housing provides full weatherproofing for exposed outdoor positions. H.265+ compression keeps storage and bandwidth requirements manageable at 4K resolution, and PoE support simplifies installation by carrying power and data over a single cable. Available at Security Wholesalers, the DS-2CD2185G0-IMS is suited to sites that need 8MP image quality with the added flexibility of direct HDMI monitor output alongside standard IP network connectivity.
Buyer Decision Tips
Buyer Tip: The HDMI output on the DS-2CD2185G0-IMS uses a Micro (Type D) connector. Confirm that your monitor has a compatible Micro HDMI input or that you have a suitable adapter before installation. The camera provides live output only via HDMI – recording still requires an NVR or VMS connected via the RJ45 network port. If HDMI direct viewing is not required for your installation, a standard 8MP dome without this port may offer a more cost-effective option.
Key Features & Technical Specifications
| Resolution | 8MP (3840 x 2160) at up to 20fps (50Hz) |
| Image Sensor | 1/2.5″ progressive scan CMOS |
| Lens | 2.8mm fixed lens (supplied) |
| IR Range | Up to 30m (EXIR LED) |
| IR Cut Filter | Built-in, auto day/night switching |
| Wide Dynamic Range | 120dB |
| Noise Reduction | 3D Digital Noise Reduction |
| Video Compression | H.265+, H.265, H.264+, H.264, MJPEG |
| Video Streams | Dual simultaneous streams |
| HDMI Output | Micro HDMI (Type D, female connector) |
| Network Interface | RJ45 10M/100M Ethernet |
| Power Supply | DC12V and PoE (IEEE 802.3af) |
| Audio | Audio input and output ports |
| Alarm I/O | Alarm input and output supported |
| Weather Rating | IP67 |
| Vandal Rating | IK10 |
| Protocol Compliance | ONVIF compliant |
| Product Status | Discontinued – no longer manufactured |
Ideal Use Cases
Retail Counter Monitoring with Live Display
The Micro HDMI output enables a live feed to be shown on a counter display monitor without any additional hardware, useful for deterrence at checkout or service desk positions where a visible screen adds value.
Outdoor Building Entrances
IP67 weatherproofing combined with IK10 impact resistance suits mounting at exposed building entrances where the dome will face weather and potential contact. The 120dB WDR handles the contrast between indoor and outdoor lighting at these positions.
Car Parks and Covered Walkways After Dark
Up to 30m of EXIR IR illumination supports monitoring of unlit or poorly lit outdoor spaces. The fixed 2.8mm lens provides a wide field of view suited to open areas where broad scene coverage takes priority over long-distance detail.
Small Office and Reception Areas
The dome housing profiles neatly against a ceiling, and the camera can feed a desktop or wall monitor directly via HDMI for a simple standalone display in reception, stairwells, or lobby positions without requiring a full VMS deployment.
ONVIF-Compatible NVR Integration
ONVIF compliance allows the DS-2CD2185G0-IMS to integrate with a broad range of third-party NVRs and VMS platforms, making it a flexible addition to existing IP surveillance systems that require an 8MP dome at a specific coverage point.
Choosing the Right Model
- Choose this model if: Your installation requires an 8MP outdoor dome with a Micro HDMI output for direct monitor connection, combined with IP67 weatherproofing, IK10 vandal resistance, and PoE support in a single unit.
- Consider availability carefully: The DS-2CD2185G0-IMS is discontinued and is no longer manufactured. If ongoing supply of matching units is important for a multi-camera installation or future expansion, confirm stock levels before committing to this model as a site standard.
- Choose a different model if: You do not need the HDMI output and simply require an 8MP outdoor dome for NVR-based recording. A current-production 8MP dome without HDMI will offer the same resolution and IR performance with the benefit of ongoing manufacturer support and availability.
FAQs
- What does the HDMI output on the DS-2CD2185G0-IMS do?
The Micro HDMI (Type D) output allows the camera to send a live video signal directly to a compatible monitor without any NVR or recording software. This is useful for standalone viewing applications such as retail counters or reception desks. Recording still requires the camera to be connected to an NVR or VMS via the RJ45 network port. - What type of HDMI connector does this camera use?
The DS-2CD2185G0-IMS uses a Micro HDMI connector, also known as Type D. This is a smaller connector than standard HDMI. You will need a Micro HDMI to standard HDMI cable or adapter to connect to most monitors and displays. Confirm your monitor’s input type before installation. - Is the DS-2CD2185G0-IMS suitable for outdoor use?
Yes. The camera carries an IP67 weatherproof rating, meaning it is fully protected against dust ingress and water immersion at defined depths. It also has an IK10 vandal-resistant rating, confirming the housing can withstand significant impact. These ratings make it suitable for exposed outdoor mounting positions including facades, eaves, and covered walkways. - What is the IR range and does it work in complete darkness?
The EXIR LEDs provide up to 30m of infrared illumination. A built-in IR-cut filter automatically switches between colour daytime mode and monochrome IR night mode. In complete darkness, the camera produces a black-and-white image using IR light only, with no visible light source required at the camera itself. - Does the DS-2CD2185G0-IMS support PoE?
Yes. The camera supports Power over Ethernet (PoE) in addition to DC12V. PoE allows both power and data to travel over a single Cat5e or Cat6 cable, which simplifies installation and reduces the need for a separate power supply at the mounting point. A PoE switch or PoE injector is required to use this feature. - Is this product still available and supported?
The DS-2CD2185G0-IMS has been discontinued by Hikvision and is no longer in production. Stock availability may be limited. Security Wholesalers recommends confirming current stock levels before ordering, particularly for multi-camera projects where consistent supply is needed. For new installations, a current-production 8MP dome camera is generally preferable to ensure ongoing manufacturer support.
Additional Information






















