Product Overview
Built for demanding outdoor and industrial environments, the DS-1701ZJ-AC1(OS) is a heavy-duty wall mount bracket finished in stainless steel with an anticorrosive coating and a silver moon gray appearance. Weighing approximately 3800 g, this bracket is constructed to support larger Hikvision camera housings in locations where standard powder-coated steel brackets would be vulnerable to rust, salt air, or chemical exposure. Featuring a substantial profile at 228 mm x 140 mm x 412.5 mm, it provides the reach and rigidity needed to position cameras correctly on building facades, perimeter walls, and industrial structures. It is suited to both indoor and outdoor installation, making it a consistent hardware choice across mixed-environment deployments where bracket longevity and finish integrity matter over time.
Key Capabilities
Stainless Steel Construction
Fabricated from stainless steel rather than standard mild steel, this bracket resists surface rust and structural degradation in wet, humid, and coastal conditions where painted steel brackets typically fail within a few seasons.
Anticorrosive Coating
The anticorrosive coating adds a secondary layer of protection over the stainless steel substrate, extending service life in environments exposed to salt spray, cleaning chemicals, or industrial airborne contaminants.
Indoor and Outdoor Rated
Confirmed for both indoor and outdoor installation, this bracket can be used consistently across a single site without specifying different hardware for internal and external camera positions, simplifying procurement and stock management.
Substantial Build Weight
At approximately 3800 g, the bracket’s solid mass reflects the structural rigidity required to hold larger camera housings firmly in position, reducing vibration-induced image blur on exposed exterior walls and industrial structures.
Best For
- Coastal and Marine Environments: The stainless steel body and anticorrosive coating make this bracket appropriate for installations near the ocean or in high-humidity locations where standard brackets corrode quickly.
- Industrial and Chemical Exposure Sites: Warehouses, processing facilities, and sites with airborne chemicals benefit from a bracket that resists surface degradation without requiring frequent replacement.
- Long-Term Commercial Installations: For installations where bracket replacement is disruptive or costly, the stainless steel and anticorrosive finish supports a longer service life than standard mounting hardware.
Why Choose the DS-1701ZJ-AC1(OS)
The DS-1701ZJ-AC1(OS) is not a standard painted wall bracket. Its stainless steel body combined with an anticorrosive coating places it in a category of mounting hardware suited to environments where bracket longevity is a genuine operational concern. A lightweight powder-coated bracket will show rust within a year in coastal or industrial conditions, creating callbacks and repeat installation labour costs. This bracket is designed to avoid that outcome. Its dimensions at 228 mm x 140 mm x 412.5 mm and its 3800 g mass indicate it is built for larger camera housings that require secure, vibration-resistant support on exterior walls. Available through Security Wholesalers, this bracket suits installers who specify hardware to last the full life of a surveillance system rather than treating brackets as a consumable item.
Buyer Decision Tips
Buyer Tip: Confirm the camera housing weight before ordering. This bracket weighs approximately 3800 g empty, which indicates it is engineered for larger and heavier camera bodies. If you are mounting a compact mini dome or lightweight turret, a smaller bracket in this range may be more appropriate. The DS-1701ZJ-AC1(OS) is best matched to full-size bullet or box-style housings where a solid, corrosion-resistant mount is required for long-term outdoor or industrial deployment.
Key Features & Technical Specifications
| Model |
DS-1701ZJ-AC1(OS) |
| Bracket Type |
Wall mount |
| Material |
Stainless steel |
| Surface Finish |
Anticorrosive coating |
| Appearance |
Silver moon gray |
| Application |
Suitable for indoor and outdoor installation |
| Dimensions |
228 mm x 140 mm x 412.5 mm (8.98″ x 5.51″ x 16.24″) |
| Weight |
Approx. 3800 g (8.38 lb.) |
Ideal Use Cases
Coastal Commercial Properties
Properties within salt air proximity, such as marinas, waterfront retail, and coastal warehouses, benefit from the stainless steel construction and anticorrosive coating, which resist the accelerated oxidation common in these environments.
Industrial Facility Perimeters
Factories, processing plants, and industrial yards with chemical exposure or high-pressure washdown areas require mounting hardware that holds up beyond a single wet season. This bracket is built to those demands.
External Building Facades
The bracket’s 412.5 mm arm length provides the standoff distance required to position cameras correctly on rendered or brick facades without obstruction from eaves or architectural features.
Long-Term Multi-Site Rollouts
Installers deploying systems across multiple commercial sites specify corrosion-resistant hardware to standardise maintenance schedules. The silver moon gray finish and stainless steel build provide a consistent, durable appearance across all locations.
Choosing the Right Model
- Choose this model if: You are mounting a larger, heavier camera housing in a coastal, industrial, or high-humidity outdoor location where stainless steel and an anticorrosive coating are necessary for long-term bracket integrity.
- Choose a different model if: Your installation is a sheltered indoor environment with no moisture or chemical exposure, where a standard painted steel or aluminium bracket would provide equivalent performance at a lower cost.
- Choose a different model if: The camera you are mounting is lightweight and compact. The mass and dimensions of this bracket are suited to larger housings, and a smaller bracket in the Hikvision range may be a better physical and aesthetic match for mini-format cameras.
FAQs
- What makes this bracket different from a standard painted steel wall mount?
The DS-1701ZJ-AC1(OS) is fabricated from stainless steel and finished with an anticorrosive coating, whereas standard wall mounts use mild steel with a powder coat. Powder coat scratches and eventually lifts in outdoor conditions, allowing rust to develop beneath the surface. Stainless steel with an anticorrosive coating resists this process in coastal, humid, and chemically exposed environments.
- Is this bracket suitable for outdoor installation?
Yes. The DS-1701ZJ-AC1(OS) is confirmed for both indoor and outdoor installation. The stainless steel body and anticorrosive coating make it appropriate for exposed outdoor wall mounting where weather resistance and corrosion resistance are required over the long term.
- What are the dimensions of the bracket arm?
The bracket measures 228 mm x 140 mm x 412.5 mm (8.98″ x 5.51″ x 16.24″). The 412.5 mm length provides a meaningful standoff from the wall surface, which is important when positioning cameras to achieve the correct field of view without obstruction from building features.
- How heavy is this bracket and what does that indicate about the cameras it supports?
The bracket weighs approximately 3800 g (8.38 lb.) unloaded. This mass reflects the stainless steel construction and indicates the bracket is designed to support heavier camera housings. It is not intended for compact lightweight cameras, and its structural rating is consistent with full-size bullet or large housing cameras.
- Where can I purchase the DS-1701ZJ-AC1(OS) in Australia?
The DS-1701ZJ-AC1(OS) is part of the Security Wholesalers range, available for trade and installer purchase. It is designed for professional installation projects and is stocked alongside compatible Hikvision camera housings and accessories for consolidated ordering.
Additional Information
No additional downloads available for this product.
