Product Overview
Built for wall-mounting compact PTZ cameras in locations where a ceiling or pole mount is not practical, the DS-1294ZJ-PT provides a stable, purpose-designed mounting solution for specific Hikvision and HiLook PTZ models. Constructed from a combination of plastic and steel, the bracket balances lightweight handling during installation with the structural rigidity needed to hold a PTZ camera securely against a wall surface. Measuring 223.5 x 125.8 x 80mm and weighing 480g, it is compact enough to suit confined spaces such as corridor ends, room corners, and building exteriors where a lower-profile mounting position is preferred. The DS-1294ZJ-PT is confirmed compatible with the DS-2DE2A404IW-DE3 and the HiLook PTZ-N2404I-DE3, making it a matched accessory for installers deploying either of those PTZ models. Checking camera compatibility before purchasing is strongly recommended, as this bracket is not a universal fit for all PTZ housings.
Key Capabilities
Steel and Plastic Construction
The combination of steel and plastic keeps the bracket lightweight at 480g while providing the rigidity required to hold a PTZ camera steady during pan and tilt operation. This material mix also makes handling and positioning during installation easier compared to all-metal brackets of equivalent load capacity.
Compact Wall-Mount Profile
At 223.5 x 125.8 x 80mm, the DS-1294ZJ-PT projects minimally from the wall surface. This low-profile design suits installations in corridors, room corners, and building facades where a bulky mounting arm would obstruct movement or look out of place.
Confirmed Camera Compatibility
The bracket is specifically confirmed for use with the Hikvision DS-2DE2A404IW-DE3 and the HiLook PTZ-N2404I-DE3. Purchasing a matched bracket eliminates fitting uncertainty and ensures the camera housing seats correctly against the mount without improvised adapters.
Wall Surface Installation
Designed for direct wall attachment, the DS-1294ZJ-PT allows installers to position compatible PTZ cameras on vertical surfaces where ceiling mounting is not feasible. This is particularly useful in open-span areas with high ceilings or external walls where cable routing to a ceiling point would be impractical.
Best For
- Installers deploying the DS-2DE2A404IW-DE3: This bracket is a confirmed compatible wall mount for that specific PTZ model, removing any guesswork around fitting and structural support.
- HiLook PTZ-N2404I-DE3 installations: Where a wall-mounted position is required for the HiLook PTZ model, the DS-1294ZJ-PT is the matched bracket option.
- Locations without suitable ceiling mounting: The wall-mount design suits corridors, external building walls, and spaces where running cable to a ceiling position is not practical or cost-effective.
Why Choose the DS-1294ZJ-PT
Using a bracket that is specifically confirmed compatible with a camera model matters more for PTZ cameras than for fixed cameras, because the housing shape, weight distribution, and mounting interface vary significantly between PTZ models. The DS-1294ZJ-PT is designed to suit the DS-2DE2A404IW-DE3 and HiLook PTZ-N2404I-DE3, meaning the camera will seat properly, cables can be routed cleanly, and the bracket can handle the weight of 480g at the mount point without strain. A generic bracket sourced separately may not align correctly with the camera’s mounting collar, leading to vibration during pan and tilt cycles or misalignment that affects camera aim. Available at Security Wholesalers, the DS-1294ZJ-PT is a straightforward solution for installers who want a matched wall mount without sourcing and testing alternatives.
Buyer Decision Tips
Confirm your camera model before ordering: The DS-1294ZJ-PT is confirmed compatible with the DS-2DE2A404IW-DE3 and the HiLook PTZ-N2404I-DE3 only. If you are mounting a different PTZ model, verify bracket compatibility against that camera’s datasheet before purchasing, as PTZ mounting interfaces are not standardised across model families.
Key Features & Technical Specifications
| Model |
DS-1294ZJ-PT |
| Type |
Wall mount bracket |
| Material |
Plastic and steel |
| Dimensions |
223.5 x 125.8 x 80mm |
| Weight |
480g |
| Compatible Camera Models |
DS-2DE2A404IW-DE3, HiLook PTZ-N2404I-DE3 |
| Mount Type |
Wall mount |
| Brand |
Hikvision |
Ideal Use Cases
Corridor and Hallway Walls
The compact 223.5 x 125.8 x 80mm profile keeps the bracket close to the wall surface, making it suitable for corridor installations where ceiling cable runs are not practical and a low-projection mount is preferred.
External Building Walls
For outdoor PTZ deployments using the DS-2DE2A404IW-DE3, this wall mount provides a secure attachment point on rendered, brick, or concrete surfaces where ceiling or soffit mounting is not available.
Replacement Bracket Installations
Where an existing bracket has been damaged or was originally incorrectly specified for the DS-2DE2A404IW-DE3 or HiLook PTZ-N2404I-DE3, the DS-1294ZJ-PT provides a confirmed replacement that fits without modification.
New PTZ System Completions
Installers completing a new PTZ camera deployment with the HiLook PTZ-N2404I-DE3 can source this matched wall mount alongside the camera to ensure the full installation is ready to proceed without a secondary bracket sourcing step.
Choosing the Right Model
- Choose this model if: You are installing the DS-2DE2A404IW-DE3 or the HiLook PTZ-N2404I-DE3 on a wall surface and need a confirmed compatible bracket with a compact 223.5 x 125.8 x 80mm footprint.
- Choose a different model if: You are mounting a different PTZ camera model, need a pole mount or ceiling mount, or require a heavy-duty bracket rated for a larger or heavier PTZ housing. Confirm the compatible bracket reference in your camera’s datasheet before ordering.
FAQs
- Which cameras is the DS-1294ZJ-PT confirmed compatible with?
The DS-1294ZJ-PT is confirmed compatible with the Hikvision DS-2DE2A404IW-DE3 and the HiLook PTZ-N2404I-DE3. If you are deploying a different PTZ model, check its datasheet for the bracket reference before purchasing this mount.
- What material is the bracket made from?
The DS-1294ZJ-PT is constructed from a combination of plastic and steel. This mix keeps the bracket’s weight at 480g, which simplifies handling during installation while maintaining the structural support needed for a PTZ camera.
- How large is the DS-1294ZJ-PT?
The bracket measures 223.5 x 125.8 x 80mm. The 80mm depth indicates how far the camera will project from the wall surface once mounted. This compact projection makes it suited to corridors and other spaces where a large arm bracket would be obstructive.
- Can this bracket be used for ceiling or pole mounting?
The DS-1294ZJ-PT is designed for wall mounting. It is not confirmed for ceiling or pole installation. If you need a ceiling or pole mount for compatible PTZ models, a different bracket designed for those surface types should be selected.
- Where can I get the datasheet for this bracket?
The datasheet for the DS-1294ZJ-PT is available through Security Wholesalers. A direct download link is provided in the Additional Information section below. The datasheet confirms dimensions, weight, material, and compatible camera models.
Additional Information
