Product Overview
Installers working on surface-mounted Hikvision camera setups will find the DS-1280ZJ-TR13 junction box a practical addition to any professional installation. Built from aluminium alloy with a Hikvision white finish, this junction box is designed to sit between a compatible Hikvision turret camera and the mounting surface, providing an enclosed space to house cable tails, network plugs and connector joins that would otherwise be left exposed. Measuring Φ110mm × 144.3mm × 48mm and weighing approximately 187g, it suits both indoor and outdoor environments. It is particularly useful where there is no wall or ceiling cavity available to conceal cabling, such as brick walls, concrete surfaces or external fascia boards. The aluminium alloy construction keeps the unit lightweight while remaining durable enough for long-term outdoor installation. Note that the DS-1280ZJ-TR13 is a camera accessory only and does not include a camera. Lead time is 6 to 8 weeks.
Key Capabilities
Aluminium Alloy Construction
The aluminium alloy body keeps the junction box lightweight at approximately 187g while providing the durability needed for long-term indoor and outdoor use. It resists the warping and cracking that can affect plastic housings in weathered outdoor conditions.
Cable Concealment for Surface Mounts
When cameras are fixed to solid walls or external surfaces without a cavity, cable tails and connector joins have nowhere to go. The DS-1280ZJ-TR13 provides an enclosed chamber to house these connections neatly behind the camera, keeping the finished result tidy and protected.
Indoor and Outdoor Suitability
Hikvision lists the DS-1280ZJ-TR13 as suitable for both indoor and outdoor applications. This makes it a consistent accessory choice across installations ranging from internal office walls through to external building facades and covered outdoor structures.
Hikvision White Finish
The Hikvision white finish is matched to blend with the housing of many compatible Hikvision turret cameras. This gives wall-mounted setups a consistent, factory-finished appearance rather than an obvious afterthought bracket beneath the camera body.
Best For
- Surface-Mounted Camera Installations: Where brick, concrete or rendered walls leave no cavity for cable runs, the junction box gives cable tails a clean and enclosed termination point directly behind the camera.
- Outdoor Installations Needing Connector Protection: Network plugs, BNC connectors and DC joins left exposed on an external wall are vulnerable to weather and interference. The aluminium alloy enclosure helps keep these connections sheltered.
- Retrofit CCTV Upgrades: When replacing older cameras on existing cable routes that run on the surface rather than through the wall, this junction box allows the new camera to mount cleanly over the existing cabling without modification to the wall.
Why Choose the DS-1280ZJ-TR13
The DS-1280ZJ-TR13 is a genuine Hikvision accessory, which means the mounting hole pattern, base diameter and finish are designed to match compatible Hikvision camera housings rather than being an approximation from a third-party supplier. At Φ110mm base diameter and a depth of 48mm, there is enough internal clearance to house a network cable plug or camera tail without forcing tight bends that could damage connectors over time. The aluminium alloy body handles the expansion and contraction of outdoor temperature cycles better than plastic equivalents. The Hikvision white finish ensures the junction box does not stand out against the camera housing above it. For installers who want a clean, consistent result on solid-wall surface mounts, this is a straightforward accessory that does its job without compromise. The DS-1280ZJ-TR13 is available at Security Wholesalers and carries a lead time of 6 to 8 weeks, so ordering ahead of installation is recommended.
Buyer Decision Tips
Buyer Tip: Hikvision junction boxes are camera-specific, not universal. The DS-1280ZJ-TR13 is designed to align with compatible Hikvision turret camera bases. Before ordering, confirm that your camera model’s base footprint and fixing hole pattern match this junction box. This is especially important when ordering ahead of delivery, given the 6 to 8 week lead time. If you are unsure, check the Hikvision accessory compatibility list for your specific camera model before placing your order.
Key Features & Technical Specifications
| Model |
DS-1280ZJ-TR13 |
| Product Type |
Junction Box |
| Brand |
Hikvision |
| Material |
Aluminium Alloy |
| Colour / Finish |
Hikvision White |
| Dimensions |
Φ110mm x 144.3mm x 48mm |
| Weight |
Approx. 187g |
| Application |
Indoor and outdoor camera mounting |
| Camera Included |
No – accessory only |
| Compatibility |
Compatible Hikvision turret cameras (verify before ordering) |
| Lead Time |
6 to 8 weeks |
Ideal Use Cases
Brick and Concrete Wall Mounts
When cameras are fixed directly to solid masonry with no conduit or cavity, the DS-1280ZJ-TR13 provides the only enclosed space available for housing cable joins and plugs behind the camera body.
External Building Facades
On rendered or clad external walls where cable runs sit on the surface, the aluminium alloy junction box shields connector joins from UV exposure, rain and temperature fluctuation while keeping the camera mount looking intentional.
Retrofit Camera Replacements
Upgrading an existing camera on a surface-run cable route is straightforward with this junction box. The existing cable tail is housed inside the box and the new compatible camera mounts cleanly over the top without needing to reopen the wall.
Commercial and Industrial Installations
In warehouses, factories or commercial buildings where surface conduit is the standard cabling method, the DS-1280ZJ-TR13 integrates with the surface run to give a professional termination point at each camera position.
Choosing the Right Model
- Choose this model if: You are installing a compatible Hikvision turret camera onto a solid surface with no wall cavity, and you need an enclosed, aluminium alloy junction box in Hikvision white to house the cable connections neatly behind the camera.
- Choose a different model if: Your camera model is not listed as compatible with the DS-1280ZJ-TR13. Hikvision produces multiple junction box variants with different base diameters and fixing patterns to suit different camera series. Always verify the correct accessory reference for your specific camera before ordering, as an incorrect junction box will not align with the camera base.
FAQs
- What does the DS-1280ZJ-TR13 actually do?
It acts as a mounting base and cable housing for compatible Hikvision cameras installed on solid surfaces. The junction box sits between the camera and the wall, providing an enclosed chamber for cable tails, network plugs and connector joins that would otherwise be exposed behind the camera body.
- Will this junction box fit any Hikvision camera?
No. The DS-1280ZJ-TR13 is designed for specific compatible Hikvision turret cameras. The base footprint measures Φ110mm, and the fixing hole pattern is model-specific. Always confirm compatibility with your camera model before ordering. Using an incompatible junction box may result in the camera base not aligning with the mounting holes.
- Can it be used outdoors?
Yes. Hikvision lists the DS-1280ZJ-TR13 as suitable for both indoor and outdoor installations. For outdoor use, ensure all cable entry points are properly sealed with appropriate materials to reduce the risk of water ingress. The aluminium alloy construction handles outdoor temperature variations without warping.
- What are the dimensions of the DS-1280ZJ-TR13?
The junction box measures Φ110mm x 144.3mm x 48mm and weighs approximately 187g. The 48mm depth provides enough internal clearance to house a folded network cable plug or camera tail without forcing sharp bends on the connector.
- Does this product include a camera?
No. The DS-1280ZJ-TR13 is a standalone accessory. The camera is purchased and sold separately. This junction box is the mounting hardware only.
- How long does delivery take?
The DS-1280ZJ-TR13 carries a lead time of 6 to 8 weeks and is part of the Security Wholesalers range. It is recommended to order this accessory at the same time as your camera rather than after installation, to avoid delays in completing the mounting work.
Additional Information
No additional downloads available for this product.
