Product Overview
Built as a dedicated mounting solution for Hikvision mini dome cameras, the DS-1280ZJ-DM46 junction box provides a clean and structurally sound base for installations on flat walls or ceilings. Constructed from aluminium alloy with a surface spray treatment, this white junction box is designed to conceal cabling and protect the rear of compatible dome cameras from exposure. Featuring an interchangeable bottom waterproof cover and side gland nut, it offers flexibility for routing cables from different directions to suit the specific demands of each installation. Waterproof rubber is required for outdoor deployments to maintain environmental protection. With a maximum load capacity of 4.5 kg, it accommodates the weight of compatible mini dome cameras with a secure margin. Confirmed compatible models include the DS-2CD2166, DS-2CD2566, DS-2CD2186, and DS-2CD2185G0-IMS series, making it a practical add-on for those installing these cameras in locations where surface-mounted conduit or exposed cabling is not acceptable.
Key Capabilities
Aluminium Alloy Construction
The aluminium alloy body with surface spray treatment resists everyday wear and provides a durable, rigid base for mini dome cameras in both indoor and outdoor-adjacent locations. The white finish blends cleanly with ceilings and wall surfaces.
Interchangeable Waterproof Cover and Gland Nut
The bottom waterproof cover and side gland nut can be swapped to suit the cable entry direction required on-site. This interchangeability makes it easier to adapt to existing conduit runs or wall penetrations without forcing cables into awkward angles.
Wall and Ceiling Mount Compatibility
Designed for flat wall or ceiling surfaces, the DS-1280ZJ-DM46 suits a wide range of installation positions common in commercial and residential settings, from corridor ceilings to external eave soffits where the surface is flat and structurally sound.
4.5 kg Load Capacity
With a confirmed maximum load of 4.5 kg, this junction box comfortably supports the weight of compatible Hikvision mini dome cameras and their associated hardware, providing a stable and safe mounting point across both wall and ceiling orientations.
Best For
- Concealed Cable Entry: Installers routing cables through walls or ceilings benefit from the enclosed junction box design, which hides the cable penetration point and produces a cleaner finished result compared to surface-mounting without a back box.
- Outdoor-Ready Installations: When waterproof rubber is added, the DS-1280ZJ-DM46 is suitable for outdoor locations where the junction point needs protection from moisture ingress, such as building eaves or covered external walls.
- Compatible Mini Dome Camera Models: Specifically suited to the DS-2CD2166, DS-2CD2566, DS-2CD2186, and DS-2CD2185G0-IMS series, making it the correct bracket choice when installing these cameras on flat surfaces without an existing mounting point.
Why Choose the DS-1280ZJ-DM46
The DS-1280ZJ-DM46 is a purpose-built junction box engineered specifically for Hikvision mini dome cameras, not a generic bracket that may or may not align correctly with the camera’s base. The aluminium alloy body provides structural integrity that plastic alternatives cannot match, and the surface spray treatment maintains appearance in locations where the bracket is visible to occupants or visitors. The interchangeable waterproof cover and gland nut is a practical feature that distinguishes this box from simpler fixed-entry designs, allowing cable direction to be decided on-site rather than forcing a single entry point. The confirmed 4.5 kg load capacity ensures the installation meets basic safety requirements for overhead ceiling mounting. Available through Security Wholesalers, the DS-1280ZJ-DM46 is a straightforward addition to any order that includes compatible Hikvision mini dome cameras from the DS-2CD2166, DS-2CD2566, DS-2CD2186, or DS-2CD2185G0-IMS series.
Buyer Decision Tips
Buyer Tip: Before ordering, confirm your cable entry direction. The DS-1280ZJ-DM46 allows cable to enter from the bottom or the side via the interchangeable cover and gland nut, but you will need to determine which suits your conduit or in-wall cable run before completing the installation. Also confirm that your mounting surface, whether wall or ceiling, can support at least 3 times the combined weight of the camera and bracket before drilling anchor points.
Key Features & Technical Specifications
| Product Name |
Hikvision DS-1280ZJ-DM46 Junction Box |
| Colour |
White |
| Material |
Aluminium alloy with surface spray treatment |
| Mount Type |
Flat wall or ceiling mount |
| Maximum Load Capacity |
4.5 kg |
| Cable Entry |
Bottom or side (interchangeable cover and gland nut) |
| Waterproof Cover |
Included (interchangeable with side gland nut) |
| Outdoor Suitability |
Requires waterproof rubber for outdoor application |
| Compatible Camera Models |
DS-2CD2166, DS-2CD2566, DS-2CD2186, DS-2CD2185G0-IMS series |
| Structural Requirement |
Mounting surface must support at least 3 times the total weight of the camera and mount |
Ideal Use Cases
Commercial Corridor Ceilings
Where in-ceiling cable runs terminate at the surface, the DS-1280ZJ-DM46 provides a clean transition point between the ceiling penetration and the mini dome camera base, avoiding exposed cabling in high-visibility areas.
External Wall Mounting
When mounting compatible mini dome cameras on external walls with conduit or through-wall cable entry, the side gland nut option allows the cable to enter from the side, keeping the installation tidy and the junction sealed for outdoor environments when waterproof rubber is fitted.
Retail and Office Fit-Outs
The white aluminium alloy finish suits office and retail environments where the bracket is visible from below. It provides a more finished appearance than a bare wall penetration and matches standard ceiling and wall colours common in commercial interiors.
Multi-Camera Commercial Installations
Installers deploying multiple DS-2CD2166, DS-2CD2566, DS-2CD2186, or DS-2CD2185G0-IMS cameras across a site will benefit from a consistent, purpose-matched junction box that aligns correctly with each camera’s base diameter without requiring modification.
Choosing the Right Model
- Choose this model if: You are installing one of the confirmed compatible Hikvision mini dome cameras (DS-2CD2166, DS-2CD2566, DS-2CD2186, or DS-2CD2185G0-IMS series) on a flat wall or ceiling and require a tidy, enclosed junction point for the cable entry.
- Choose a different model if: Your camera is a larger dome housing or a different Hikvision dome series that does not appear in the confirmed compatibility list. Using an incorrectly matched junction box may result in misaligned fixing holes or an improper seal between the box and camera base. Check Hikvision’s compatibility documentation for your specific camera model before ordering.
FAQs
- Which Hikvision cameras is the DS-1280ZJ-DM46 confirmed to suit?
The DS-1280ZJ-DM46 is confirmed compatible with the DS-2CD2166, DS-2CD2566, DS-2CD2186, and DS-2CD2185G0-IMS series mini dome cameras. These are all Hikvision mini dome models. If your camera model is not in this list, verify compatibility with the camera’s mounting base dimensions before purchasing this junction box.
- Can the DS-1280ZJ-DM46 be used outdoors?
It can be used in outdoor locations, but waterproof rubber must be fitted to the cable entry points to prevent moisture ingress. This is not included and must be sourced separately. The bracket is not rated for submersion and should be positioned under eaves or in covered locations where direct water exposure is minimised.
- Can the cable enter from either the bottom or the side of the junction box?
Yes. The bottom waterproof cover and the side gland nut on the DS-1280ZJ-DM46 are interchangeable. You can choose which opening to use for cable entry based on how the cable arrives at the mounting point, either through the wall surface beneath the box or horizontally through the side. Only one entry point should be used at a time, with the other sealed.
- What is the maximum weight this junction box can support?
The DS-1280ZJ-DM46 has a confirmed maximum load capacity of 4.5 kg. Hikvision also specifies that the mounting surface, whether wall or ceiling, must be capable of supporting at least 3 times the combined weight of the camera and the junction box. Verify the structural capacity of your surface before drilling anchor points, particularly for ceiling installations.
- Where can I purchase the DS-1280ZJ-DM46 in Australia?
The DS-1280ZJ-DM46 is part of the Security Wholesalers range and is available for order online. It is typically purchased alongside compatible Hikvision mini dome cameras for complete installation projects. Ordering the bracket at the same time as your cameras avoids delays on-site.
Additional Information
No additional downloads available for this product.
