Product Overview
Built for installations where standard metal brackets corrode prematurely, the DS-1276ZJ-SUS is a wall mount bracket machined from SUS304 stainless steel for use with Hikvision bullet cameras in demanding environments. Featuring an integrated cable routing channel, it keeps cabling protected and neatly concealed from installation day forward. With a rated load capacity of approximately 3 kg and an operating temperature range of -40 degrees C to +60 degrees C, this bracket is sized for commercial and industrial bullet camera installations rather than lightweight consumer hardware. It is particularly well suited to coastal sites, food processing facilities, industrial yards, and public infrastructure locations where salt air, humidity, or airborne contaminants shorten the lifespan of zinc or powder-coated steel brackets. The DS-1276ZJ-SUS delivers a long-service mounting solution that maintains structural integrity and finish where the installation environment itself is the primary challenge.
Key Capabilities
SUS304 Stainless Steel Construction
SUS304 is a marine-grade austenitic steel grade with inherent resistance to rust, salt spray, and oxidation. Unlike painted or galvanised steel brackets, SUS304 maintains its structural integrity and surface finish in coastal, humid, and chemically active environments without protective coatings that can chip or degrade over time.
Integrated Cable Routing Channel
The bracket includes a built-in cable channel that routes and conceals camera cabling cleanly through the mount. This protects the cable at the wall entry point, reduces UV and mechanical wear on the cable jacket, and produces a professional finish that matters in customer-facing or public-access locations.
3 kg Load Rating
A maximum load capacity of approximately 3 kg accommodates the weight of full-size Hikvision bullet cameras including those housed in heavy-duty metal enclosures. This rating provides confidence that the mount will hold position under wind load or minor physical contact without flexing or loosening at the wall fixing point.
Wide Operating Temperature Range
Rated from -40 degrees C to +60 degrees C with humidity tolerance up to 95% RH, the DS-1276ZJ-SUS remains dimensionally stable and structurally secure across extreme climate conditions. This range covers outdoor wall installations in far north Queensland summers and alpine or refrigerated industrial sites alike.
Best For
- Coastal and Marine Sites: SUS304 stainless steel resists salt air and salt spray corrosion that degrades standard zinc or painted steel brackets within months in beachside or harbour-front locations.
- Industrial and Chemical Environments: The non-reactive stainless steel surface withstands airborne chemical contaminants, cleaning agents, and high ambient humidity in factories, refineries, and processing plants.
- Food Processing and Pharmaceutical Facilities: Stainless steel is the preferred material in hygiene-critical environments where standard brackets cannot be used due to corrosion or contamination risk.
- Public Infrastructure and High-Exposure Outdoor Walls: The 3 kg load rating and -40 degrees C to +60 degrees C operating range support long-term bullet camera installations on bridges, tunnels, transport terminals, and exposed exterior walls.
Why Choose the DS-1276ZJ-SUS
Standard aluminium or zinc-die-cast camera brackets are adequate for sheltered indoor locations or mild climates, but they corrode, discolour, and weaken in the environments where the DS-1276ZJ-SUS is genuinely needed. The SUS304 grade used here is a deliberate engineering choice: it provides corrosion resistance without a surface coating that can fail, flake, or trap contaminants. The integrated cable channel adds practical value by protecting the cable at the most vulnerable point in a wall-mount run, the wall exit. With a 3 kg load capacity and operating tolerance down to -40 degrees C, this bracket handles full-size Hikvision bullet cameras across extreme climates without compromise. For installers specifying mounts in coastal developments, industrial CCTV upgrades, or hygienic facility environments, the DS-1276ZJ-SUS available at Security Wholesalers is the appropriate choice where bracket longevity and material compliance are part of the project specification.
Buyer Tip: Before ordering, confirm the mounting footprint of your specific Hikvision bullet camera model against the DS-1276ZJ-SUS fixing pattern. While this bracket is compatible with a range of Hikvision bullet cameras, not every bullet camera in the Hikvision lineup shares the same base dimension. If your installation involves a non-standard or very compact bullet model, verify compatibility with your supplier before committing to this mount.
Key Features & Technical Specifications
| Model |
DS-1276ZJ-SUS |
| Material |
SUS304 stainless steel |
| Mount Type |
Wall mount bracket |
| Compatible Camera Type |
Hikvision bullet cameras |
| Maximum Load Capacity |
Approx. 3 kg |
| Cable Management |
Integrated cable routing channel |
| Corrosion Resistance |
Anti-rust, anti-corrosion SUS304 grade |
| Operating Temperature |
-40 degrees C to +60 degrees C |
| Operating Humidity |
Up to 95% RH |
| Finish |
Stainless steel brushed finish with concealed wiring |
| Installation Type |
Wall-mounted, fixed bracket |
| Maintenance |
Low maintenance, no surface coating required |
Ideal Use Cases
Coastal and Marine Environments
Salt air and spray cause standard steel brackets to rust rapidly in beachside, marina, and harbour installations. The SUS304 construction of the DS-1276ZJ-SUS resists salt-induced corrosion, maintaining holding strength and appearance over extended service periods without the bracket needing replacement.
Industrial Facilities and Refineries
Factories, chemical plants, and refineries expose mounting hardware to airborne contaminants and high ambient humidity. The non-reactive stainless surface handles these conditions without surface degradation, and the -40 degrees C to +60 degrees C operating range covers both cold-store and high-heat industrial zones.
Food Processing and Pharmaceutical Sites
Hygiene-critical facilities often require stainless steel hardware throughout. The DS-1276ZJ-SUS meets that material preference with its SUS304 grade, which is compatible with cleaning and sanitising routines common in food-grade and pharmaceutical manufacturing environments.
Public Infrastructure
Bridges, tunnels, transport terminals, and public car parks require mounting hardware that holds up under heavy exposure without maintenance cycles. The 3 kg load capacity supports full-size bullet cameras, and the integrated cable channel protects cabling in locations where cable runs are difficult to service after installation.
Commercial Outdoor Walls in High-Humidity Climates
In tropical or high-rainfall regions of Australia, painted or galvanised brackets deteriorate within a few seasons. The DS-1276ZJ-SUS provides a long-life mounting option for commercial perimeter bullet cameras where bracket replacement would require scaffold or elevated access, making durability a direct cost-saving factor.
Choosing the Right Model
- Choose this model if: Your installation is in a coastal, industrial, high-humidity, or hygiene-critical environment where SUS304 stainless steel is required and you are mounting a compatible Hikvision bullet camera weighing within the 3 kg load rating.
- Choose a different model if: Your installation is in a sheltered indoor or low-humidity environment where corrosion is not a concern. In those situations a standard aluminium or zinc-cast Hikvision wall bracket provides the same mechanical function at a lower cost, and the stainless material specification adds no practical benefit.
FAQs
- What makes SUS304 stainless steel suitable for outdoor CCTV brackets in coastal areas?
SUS304 is an austenitic stainless steel grade containing chromium and nickel, which form a passive oxide layer on the surface that resists rust, salt spray, and oxidation. Unlike powder-coated or galvanised steel brackets, SUS304 does not rely on a surface coating to prevent corrosion, so it continues to perform even if the surface is scratched or abraded during installation or maintenance.
- What is the maximum weight the DS-1276ZJ-SUS can support?
The bracket is rated to a maximum load capacity of approximately 3 kg. Most standard Hikvision bullet cameras fall well within this limit. However, if you are mounting a large-body camera with an add-on housing or heavy lens, confirm the combined weight of all mounted components before installation to ensure you stay within the rated load.
- Does this bracket include cable management for the camera cable?
Yes. The DS-1276ZJ-SUS incorporates an integrated cable routing channel that guides the camera cable through the bracket body. This conceals and protects the cable at the wall entry point, reducing UV exposure and mechanical wear on the cable jacket and producing a cleaner installation finish.
- Is this bracket suitable for use in food processing or pharmaceutical facilities?
Stainless steel is a standard material specification in food-grade and pharmaceutical environments due to its non-reactive surface and resistance to cleaning agents and sanitisers. The DS-1276ZJ-SUS, with its SUS304 construction, is appropriate for these facility types. Always confirm with your site’s compliance requirements that the specific grade and finish meet your facility’s standards before installation.
- Where can I source the DS-1276ZJ-SUS in Australia?
The DS-1276ZJ-SUS is part of the Security Wholesalers range and is available for order through their platform. It is supplied as a standalone wall mount bracket and does not include cameras or cabling. Installers sourcing brackets for a multi-site project should confirm stock availability before scheduling installation dates.
Additional Information
No additional downloads available for this product.
