Product Overview
For installers who need to power a single high-draw PoE device without replacing an existing non-PoE switch, the Hikvision LAS60-57CN-RJ45 provides a straightforward inline solution. This single-port midspan injector sits between a standard network switch and a compatible PoE-powered device, delivering up to 60W at 56VDC through a Gigabit Ethernet connection. Featuring built-in surge protection, it suits professional security and network installations where power stability matters. The compact midspan format is particularly practical when only one additional PoE run is needed, such as adding a PTZ camera, wireless bridge, or access control unit to an existing non-PoE infrastructure. Confirm the connected device’s PoE standard, wattage, cable length, and cable category before deployment to ensure compatibility with the LAS60-57CN-RJ45.
Key Capabilities
60W PoE Power Output
With 60W available from a single port, this injector supports higher-power PoE devices that fall beyond the range of standard 15W or 30W injectors, making it suitable for demanding endpoints such as PTZ cameras or wireless bridges.
Single-Port Midspan Design
The inline midspan format inserts between an existing switch port and the powered device. This allows PoE to be added to one network run without any switch replacement, keeping infrastructure changes minimal on established installations.
Gigabit Ethernet Support
Gigabit Ethernet throughput means the injector does not become a data bottleneck for bandwidth-intensive devices such as high-resolution IP cameras or wireless access points that require fast network connectivity alongside power.
56VDC Output Voltage
The 56VDC output is suited to compatible higher-power PoE devices. Verify the powered device supports this voltage and PoE standard before installation to ensure correct operation.
Built-In Surge Protection
Integrated surge protection reduces exposure to electrical surges on the network or power line, providing an added layer of protection for both the connected device and the injector itself in professional installation environments.
Best For
- Non-PoE Switch Extensions: Adds PoE to a single port on an existing non-PoE switch without requiring a full infrastructure change.
- High-Power Single-Device Runs: Practical where the connected device requires up to 60W, beyond the capacity of standard low-power injectors.
- Gigabit-Dependent Devices: Maintains full Gigabit data throughput alongside power delivery for cameras or network devices that require high-speed connectivity.
- Surge-Sensitive Installations: Suited to sites where protecting powered equipment from line surges is a priority, supported by the injector’s built-in surge protection.
Why Choose the LAS60-57CN-RJ45
Where a standard PoE injector maxes out at 15W or 30W, the LAS60-57CN-RJ45 steps up to 60W, making it a more capable option for power-hungry PoE devices that lower-rated injectors cannot support. The Gigabit Ethernet interface ensures the injector does not limit data speeds for high-bandwidth endpoints, and the 56VDC output is matched to compatible higher-power PoE equipment. Built-in surge protection adds practical value in commercial and security installations where equipment exposure to power fluctuations needs to be managed. Available through Security Wholesalers, this injector is best selected after confirming the powered device’s PoE standard, wattage draw, cable run length, and cable category to ensure a compatible and stable deployment.
Buyer Decision Tips
Power Compatibility Tip: Before ordering the LAS60-57CN-RJ45, check the powered device’s PoE standard and maximum wattage. A device rated below 60W is generally compatible, but the PoE standard must align. Devices requiring a different PoE negotiation standard or voltage range may not operate correctly with this injector, so reviewing the device datasheet first is recommended.
Single vs. Multi-Port Consideration: The LAS60-57CN-RJ45 powers one device only. If 2 or more PoE devices need to be added to an existing non-PoE switch, a dedicated PoE switch with the required port count and total power budget is a more practical solution than multiple individual injectors.
Key Features & Technical Specifications
| Model |
LAS60-57CN-RJ45 |
| Product Type |
Single-port PoE midspan injector |
| PoE Power Output |
60W |
| Output Voltage |
56VDC |
| Network Interface |
RJ45 Ethernet |
| Ethernet Speed |
Gigabit Ethernet |
| Port Count |
1 PoE output port |
| Surge Protection |
Built-in |
| Installation Type |
Inline midspan between network switch and powered device |
| Typical Applications |
IP cameras, access control devices, intercom equipment, wireless bridges, remote PoE network endpoints |
| Brand |
Hikvision |
| Installation Consideration |
Confirm device PoE standard, wattage, cable length, cable category, and power outlet location before installation |
Ideal Use Cases
PTZ Camera Power Supply
PTZ cameras often draw more power than fixed cameras. The 60W output of the LAS60-57CN-RJ45 provides the headroom needed to power compatible high-draw PTZ units from an existing non-PoE switch port.
Wireless Bridge Installations
Wireless bridge units used for long-range point-to-point links often require higher PoE wattage. This injector supports compatible devices while maintaining Gigabit Ethernet data throughput across the link.
Access Control and Intercom Endpoints
Access control panels and intercom door stations requiring PoE power can be connected through the LAS60-57CN-RJ45 where the existing switch does not supply PoE on that port.
Retrofit PoE for Existing Infrastructure
Where a non-PoE switch is already installed and only one additional PoE device is being added, the LAS60-57CN-RJ45 avoids the cost and disruption of a full switch replacement.
Remote Network Device Power
For network devices located away from a power outlet, the Gigabit PoE injection from the LAS60-57CN-RJ45 allows power and data to reach the endpoint over a single Ethernet cable run.
Choosing the Right Model
- Choose this model if: You need a single-port 60W PoE midspan injector with Gigabit Ethernet, 56VDC output, and surge protection to power one compatible high-draw PoE device from a non-PoE switch.
- Choose a different solution if: You need to power 2 or more PoE devices – a multi-port PoE switch with sufficient total power budget is a more practical option. Similarly, if the powered device requires a lower voltage or a different PoE standard, confirm compatibility before selecting this injector.
FAQs
- What does a midspan PoE injector do?
A midspan injector sits inline between a network switch and a PoE-powered device. It takes the data signal from a standard non-PoE switch port and combines it with power before delivering both over a single Ethernet cable to the connected device. The LAS60-57CN-RJ45 uses this format to add 60W PoE to one network run without changing the switch.
- How much power does the LAS60-57CN-RJ45 deliver?
It delivers up to 60W PoE output at 56VDC. This is higher than standard PoE injectors rated at 15W or 30W, making it suitable for compatible higher-power endpoints. The connected device must be rated to accept this power level and compatible with the PoE standard provided.
- Does the injector slow down my network connection?
No. The LAS60-57CN-RJ45 supports Gigabit Ethernet, so it passes data at up to Gigabit speeds. It will not create a bottleneck for bandwidth-heavy devices such as high-resolution IP cameras or wireless bridges that rely on fast network throughput.
- Can I use this injector outdoors?
The product data does not confirm an outdoor or weatherproof rating for the LAS60-57CN-RJ45. It is recommended for indoor installation. For outdoor PoE injection, a suitably rated enclosure or outdoor-certified PoE device should be used instead.
- What does the surge protection on this injector cover?
The built-in surge protection helps reduce the risk of damage from electrical surges on the network line or power input. It is an added layer of protection rather than a replacement for proper site grounding, earthing, and electrical installation practices at the installation location.
- Can this injector power more than 1 device at a time?
No. The LAS60-57CN-RJ45 has a single PoE output port and is designed to power one compatible device per injector. For multi-device PoE requirements, a dedicated PoE switch with the appropriate port count and total power budget is the correct solution.
- Where can I get the LAS60-57CN-RJ45 and what should I check before ordering?
The LAS60-57CN-RJ45 is available through Security Wholesalers. Before ordering, confirm the powered device’s PoE standard, maximum wattage, Ethernet speed requirement, cable run length, cable category, and whether the installation environment is suitable for an indoor injector.
Additional Information
No additional downloads available for this product.
