Product SKU: SBP-125WMW
Product Overview
Designed specifically for the Hanwha Wisenet QNE-8011R and QNE-8012R multi-sensor cameras, the SBP-125WMW is a dedicated wall mount bracket finished in white. When deploying multi-sensor panoramic cameras across commercial facades, building exteriors, or outdoor perimeter positions, using the manufacturer-matched bracket ensures the camera housing seats correctly and the mounting geometry aligns with the camera’s design intent. The white finish suits installations on rendered walls, soffits, and building exteriors where a clean, unobtrusive appearance is preferred. This mount is a direct Hanwha Wisenet accessory, so installers can be confident the mechanical fit, cable routing clearance, and load rating are appropriate for the paired cameras without any guesswork or third-party bracket adaptation.
Key Capabilities
Dedicated Camera Compatibility
Engineered specifically for the QNE-8011R and QNE-8012R, this bracket matches the mounting footprint and cable exit points of these cameras exactly, removing the fit uncertainty that comes with generic third-party mounts.
Wall Mount Design
The wall mount configuration positions the paired camera out from a vertical surface, making it suitable for building exteriors, facade corners, and perimeter walls where ceiling or soffit mounting is not available.
White Finish
The white colour suits rendered building exteriors, light-coloured facades, and commercial shopfronts where a dark bracket would stand out unnecessarily and detract from a tidy installation finish.
Manufacturer-Matched Accessory
As a genuine Hanwha Wisenet accessory, the SBP-125WMW is designed alongside the cameras it supports, meaning load ratings, fixing patterns, and cable management are validated for these specific models by the manufacturer.
Best For
- QNE-8011R and QNE-8012R Installations: The only confirmed compatible cameras for this bracket, making it the correct choice when mounting either of these Hanwha multi-sensor models to a wall surface.
- Light-Coloured Exterior Walls: The white finish blends with rendered, painted, or light-coloured building exteriors for a professional, tidy appearance.
- Installations Without Ceiling or Soffit Access: Where the installation position is a vertical wall surface rather than an overhead mounting point, this bracket provides the correct standoff geometry for the paired cameras.
Why Choose the SBP-125WMW
The SBP-125WMW is the manufacturer-specified wall mount for the QNE-8011R and QNE-8012R cameras, which means it is the safest and most reliable choice when installing either of these models to a wall surface. Generic brackets may appear to fit but can misalign cable entries, place stress on the camera housing, or simply not provide the correct standoff distance for the lens geometry of these multi-sensor units. Specifying the correct Hanwha Wisenet accessory avoids rework and ensures the installation reflects the manufacturer’s design intent. The white finish is a practical choice for most commercial exterior applications where a black bracket would create an unnecessary contrast against light-coloured surfaces. Available through Security Wholesalers, the SBP-125WMW is straightforward to specify alongside the cameras it supports.
Buyer Decision Tips
Confirm Your Camera Model Before Ordering: The SBP-125WMW is confirmed for use with the QNE-8011R and QNE-8012R only. If your installation involves a different Hanwha camera model, verify compatibility with the relevant Hanwha Wisenet accessory guide before purchasing this bracket, as mounting footprints vary across the range.
Key Features & Technical Specifications
| Brand |
Hanwha Wisenet |
| Model |
SBP-125WMW |
| Mount Type |
Wall Mount |
| Colour |
White |
| Compatible Cameras |
QNE-8011R, QNE-8012R |
| Product Type |
Camera Mounting Accessory |
| Category |
Hanwha Mounts and Accessories |
Ideal Use Cases
Commercial Building Exteriors
Wall-mounted positioning on rendered or painted commercial facades suits the white finish of this bracket, keeping the installation tidy alongside the QNE-8011R or QNE-8012R camera.
Perimeter Walls and Fence Lines
Where perimeter coverage is required from a vertical wall surface rather than an overhead position, this bracket provides the correct mounting geometry for the paired multi-sensor cameras.
Car Parks and External Structures
External concrete or masonry walls in car parks and multi-level structures are common wall mount positions for wide-area cameras, where this bracket keeps the installation secure and correctly oriented.
Retail and Hospitality Exteriors
Light-coloured shopfronts and hospitality venues benefit from the white finish, allowing the bracket and camera to sit neatly against the building without drawing unnecessary attention.
Choosing the Right Model
- Choose this model if: You are installing a QNE-8011R or QNE-8012R camera to a vertical wall surface and require the manufacturer-specified white wall mount bracket for a clean, confirmed-compatible installation.
- Choose a different model if: Your camera model is not the QNE-8011R or QNE-8012R, or if you require a ceiling, pendant, or pole mount configuration. Hanwha Wisenet offers a range of mounting accessories suited to different camera models and installation positions.
FAQs
- Which cameras is the SBP-125WMW confirmed to work with?
The SBP-125WMW is confirmed for use with the Hanwha Wisenet QNE-8011R and QNE-8012R cameras. These are the only models this bracket is specified for. If you are installing a different Hanwha camera, check the relevant accessory compatibility list before selecting a bracket.
- Can this bracket be used for ceiling or pendant mounting?
No. The SBP-125WMW is a wall mount bracket designed to mount the QNE-8011R and QNE-8012R to a vertical wall surface. For ceiling, pendant, or pole configurations, a different Hanwha Wisenet accessory would be required for those mounting positions.
- Why use the manufacturer bracket instead of a generic wall mount?
Generic brackets may not align with the camera’s mounting footprint, cable exit, or standoff distance. Using the SBP-125WMW ensures the mechanical fit matches what Hanwha Wisenet validated for the QNE-8011R and QNE-8012R, reducing the risk of rework or misalignment during installation.
- Is the white finish weather-resistant for outdoor use?
The SBP-125WMW is a Hanwha Wisenet accessory intended for use with cameras that are themselves rated for outdoor installation. While the bracket’s specific ingress rating is not confirmed in the available product data, it is designed to accompany outdoor-rated Hanwha cameras in exterior applications. Confirm specific environmental ratings with the full Hanwha datasheet if your site has extreme conditions.
- Where can I purchase the SBP-125WMW alongside the cameras it supports?
The SBP-125WMW is part of the Security Wholesalers range, where it can be sourced together with the QNE-8011R and QNE-8012R cameras for straightforward project procurement.
Additional Information
No additional downloads available for this product.
