Product SKU: SBV-120GW
Product Overview
Designed for clean and professional dome camera installations, the Hanwha Wisenet SBV-120GW is a dedicated back box engineered to suit the QNV-60x2R and QNV-80x0R camera series. Back boxes are used where cables are routed through a wall or ceiling cavity rather than surface-run, allowing the installer to terminate and conceal cabling behind the camera mounting point for a tidy, finished result. The SBV-120GW is matched specifically to the physical footprint and mounting pattern of the compatible Hanwha Wisenet QNV dome cameras, ensuring a secure and accurate fit without modification. It is well suited to new construction, concrete slab installations, and commercial fit-outs where conduit or in-wall cabling is used and a flush, professional appearance is required at the camera mount point.
Key Capabilities
Camera-Specific Fit
The SBV-120GW is purpose-matched to the QNV-60x2R and QNV-80x0R series, ensuring the mounting pattern, cable entry, and housing interface align precisely with these Hanwha Wisenet dome cameras without requiring adapters or modification.
Cable Concealment
Provides a dedicated enclosure behind the camera for cable termination and management, keeping network or coax cables fully hidden behind the wall or ceiling surface for a finished, professional installation appearance.
Conduit Installation Support
Suited to installations where cabling is run through conduit or in-wall, the back box provides a standard termination point that integrates with the camera mount and keeps the cable pathway enclosed from wall entry to camera connection.
Streamlined Installation
Using a manufacturer-matched accessory simplifies the installation process, reducing the need for custom bracket fabrication or workarounds and helping installers complete ceiling or wall mounts to a consistent standard across multiple camera positions.
Best For
- New Construction and Concrete Slab Installs: Where conduit is cast into slabs or wall cavities during the build phase, the SBV-120GW provides the correct back box for the QNV-60x2R and QNV-80x0R cameras to terminate neatly at the surface.
- Commercial and Corporate Fit-Outs: Environments where a flush, cable-free appearance at the camera mounting point is required to meet building standards or client presentation expectations.
- Professional CCTV Installers: Installers deploying multiple QNV-series dome cameras across a site who need consistent, manufacturer-matched mounting hardware for repeatable results.
Why Choose the SBV-120GW
The SBV-120GW is not a universal back box but a model-specific accessory designed by Hanwha Wisenet to integrate directly with the QNV-60x2R and QNV-80x0R dome camera series. Using a generic or aftermarket back box risks misaligned mounting holes, cable entry points that do not correspond to the camera’s internal layout, or a housing gap that compromises the finished appearance of the installation. The SBV-120GW eliminates these issues by providing an exact-fit enclosure that matches the camera’s physical footprint, ensuring the installation meets the same engineering standard as the camera itself. For installers working on commercial projects where presentation and compliance matter, specifying the correct Hanwha Wisenet accessory is the straightforward choice. The SBV-120GW is available at Security Wholesalers as part of the broader Hanwha Wisenet accessories range.
Buyer Decision Tips
Confirm Your Camera Series Before Ordering: The SBV-120GW is confirmed compatible with the QNV-60x2R and QNV-80x0R camera series only. If you are installing a different Hanwha Wisenet dome model, verify the correct back box part number for that series before purchasing, as mounting footprints differ between camera families.
Key Features & Technical Specifications
| Product Name |
Hanwha Wisenet SBV-120GW Back Box |
| SKU |
SBV-120GW |
| Product Type |
Back Box / Junction Box |
| Brand |
Hanwha Wisenet |
| Compatible Camera Series |
QNV-60x2R series, QNV-80x0R series |
| Primary Application |
In-wall and conduit cable concealment for ceiling and wall dome camera installations |
| Mounting Type |
Surface-back or flush-back box to suit dome camera base |
| Colour |
White |
| Category |
Hanwha Mounts and Accessories |
Ideal Use Cases
Concrete Ceiling Slab Installs
When conduit is cast into concrete before the build is complete, the SBV-120GW provides the correct back box termination point for QNV-series dome cameras, allowing cables to emerge cleanly at the camera position.
Commercial Office Environments
Office and corporate fit-outs require a clean camera mounting finish. The SBV-120GW keeps cabling fully concealed, presenting a professional appearance that is consistent across all camera positions throughout the building.
Retail and Hospitality Venues
Venues where exposed cabling at the camera mount point would be visually unacceptable benefit from the back box approach, with the SBV-120GW ensuring the QNV dome camera sits flush and neatly against the ceiling or wall surface.
Multi-Site Commercial Projects
Installers deploying QNV-60x2R or QNV-80x0R cameras across multiple sites benefit from specifying the SBV-120GW as a standard accessory, ensuring consistent installation quality and finish at every camera position.
Choosing the Right Model
- Choose this model if: You are installing QNV-60x2R or QNV-80x0R series dome cameras and require a manufacturer-matched back box to conceal in-wall or conduit cabling at the camera mounting point.
- Choose a different model if: You are installing a Hanwha Wisenet dome camera from a different series, as the mounting footprint and cable entry layout may differ and a separate back box part number will be required for a correct fit.
FAQs
- Which cameras is the SBV-120GW compatible with?
The SBV-120GW is confirmed compatible with the Hanwha Wisenet QNV-60x2R and QNV-80x0R dome camera series. It is a model-specific accessory, so it should not be assumed to fit other Hanwha Wisenet dome cameras without verifying the correct part number for those models.
- Do I need a back box for every dome camera installation?
No. A back box is required only when cabling is run through a wall or ceiling cavity, such as through conduit or in-slab wiring. If cables are surface-run or dropped through an open ceiling void directly into the camera base, a back box may not be necessary. It is primarily a finish accessory for concealed cabling installations.
- Does the SBV-120GW affect the IP weather rating of the compatible cameras?
The SBV-120GW is a mounting accessory and its use should be assessed in the context of the camera’s own installation requirements. For outdoor or weatherproof installations using QNV-series cameras, always follow Hanwha Wisenet’s installation guidelines to ensure the camera’s rated sealing is maintained when a back box is used.
- Can the SBV-120GW be used with cameras from other brands?
The SBV-120GW is engineered to match the physical mounting footprint and cable entry layout of the QNV-60x2R and QNV-80x0R series. Using it with cameras from other manufacturers is not recommended, as mounting hole patterns and base dimensions are unlikely to align correctly.
- Where can I purchase the SBV-120GW in Australia?
The SBV-120GW is part of the Hanwha Wisenet mounts and accessories range supplied through Security Wholesalers. It is stocked as a specialist accessory to complement QNV-series dome camera deployments on professional installation projects.
Additional Information
No additional downloads available for this product.
