Product SKU: SBO-100B1
Product Overview
Built for clean and practical cable management on Hanwha Wisenet outdoor camera installations, the SBO-100B1 is an aluminium junction box designed to suit the QNO-70(1-3/8)0R series and a broad range of HCO, QNO, and SCO cameras. It mounts directly beneath the camera body to conceal cabling at the wall or surface entry point, giving installations a neater finish while protecting the cable exit from the elements. Featuring 2 conduit holes and a compact footprint of 125.6 x 45mm, it accommodates standard conduit runs without requiring modification. The aluminium housing is suited to the outdoor environments these camera series are typically deployed in, including perimeter walls, building facades, car parks, and industrial sites. Installers fitting QNO bullet cameras or SCO box cameras on concrete, brick, or metal surfaces will find the SBO-100B1 a straightforward addition to a professional installation.
Key Capabilities
Aluminium Construction
The all-aluminium housing provides durability suited to outdoor wall-mount installations where the junction box is exposed to heat, moisture, and physical contact during and after installation. It holds its shape under standard conduit pressure without flex or distortion.
Dual Conduit Entry Points
2 conduit holes give installers flexibility when routing cabling from different directions on the wall surface. This is useful on brick or concrete surfaces where conduit entry angles are dictated by the structure rather than preference.
Compact and Camera-Matched Footprint
At 125.6 x 45mm, the SBO-100B1 is sized to complement the base of compatible Hanwha QNO, HCO, and SCO camera bodies. It sits flush against the mounting surface without protruding beyond the camera’s own footprint in most configurations.
Broad Camera Compatibility
Confirmed compatibility spans QNO 6000 and 7000 and 8000 series bullet cameras, HCO 6000 and 7000 series, and SCO 6083R and 6085R models. A single junction box SKU covers a wide installation scope without needing model-specific variants for most Wisenet deployments.
Best For
- Conduit-Fed Outdoor Installations: The 2 conduit holes make the SBO-100B1 suited to installations where rigid or flexible conduit is run along the wall surface to the camera mount point, keeping cabling protected from the mounting surface to the camera base.
- QNO Bullet Camera Deployments: Installers mounting QNO 6000, 7000, or 8000 series bullet cameras on exterior walls will find this junction box provides a tidy transition from conduit to camera without improvised cable covers or exposed glands.
- Professional Finish on Hard Surfaces: On brick, concrete, or rendered masonry where surface cabling is unavoidable, the aluminium junction box produces a cleaner result than bare cable entry and is consistent with Hanwha’s own mounting system.
Why Choose the SBO-100B1
The SBO-100B1 is the manufacturer-matched junction box for Hanwha Wisenet QNO, HCO, and SCO camera series, engineered to integrate directly with the camera’s mounting base rather than relying on aftermarket brackets or generic conduit boxes that may not align with Hanwha fixings. The aluminium build keeps weight low while providing a surface that won’t crack or distort under UV exposure or temperature variation common to Australian outdoor environments. With 2 conduit entry points, installers can route from either side without cutting additional holes on site, saving time on concrete or brick substrates. Compatibility across QNO 6000 through 8000 series means a single stock item covers a wide range of project types. The SBO-100B1 is available at Security Wholesalers as part of the Hanwha Wisenet accessories range, making it straightforward to add to any QNO or HCO camera order.
Buyer Decision Tips
Confirm Camera Series Before Ordering: The SBO-100B1 is compatible with specific HCO, QNO, and SCO series models only. Before purchasing, cross-check your camera model against the confirmed compatibility list. QNO 8000 series cameras such as the 8010R, 8020R, and 8030R are included, but models outside the listed series may require a different junction box. If you are mounting a PNF-9010R series camera, the short description confirms this model is also compatible.
Key Features & Technical Specifications
| Model |
SBO-100B1 |
| Product Type |
Installation junction box |
| Material |
Aluminium |
| Conduit Holes |
2 |
| Dimensions |
125.6 x 45mm |
| Compatible QNO Models |
QNO-6010R, 6012R, 6020R, 6022R, 6030R, 6032R, 6070R, 6072R, 6082R, 7010R, 7020R, 7030R, 7080R, 8010R, 8020R, 8030R |
| Compatible HCO Models |
HCO-6080, 6070R, 6080R, 7010R, 7030R, 7070R, 7080R, 7010RA, 7020R, 7020RA, 7030RA, 7070RA, 7080RV |
| Compatible SCO Models |
SCO-6083R, SCO-6085R |
| Compatible PNF Models |
PNF-9010R series |
| Brand |
Hanwha Wisenet |
Ideal Use Cases
Perimeter Wall Camera Mounting
On exterior perimeter walls at warehouses, industrial yards, or commercial buildings, the SBO-100B1 provides a tidy conduit transition point beneath QNO bullet cameras, covering the cable entry on masonry or rendered surfaces.
Car Park and Loading Dock Coverage
QNO series cameras installed on concrete walls or steel posts at car parks and loading docks frequently require conduit from the wall surface. The 2 conduit holes in the SBO-100B1 accommodate the routing options common to these environments.
Multi-Camera Commercial Projects
On projects deploying multiple QNO 7000 or 8000 series bullet cameras across a site, the SBO-100B1’s broad model compatibility allows installers to standardise on a single junction box SKU rather than sourcing different mounts for each camera variant.
Retrofit and Upgrade Installations
When upgrading existing Hanwha camera positions to newer QNO or HCO models, the SBO-100B1 can be used to tidy cable entries that were previously exposed or covered with third-party solutions, restoring a manufacturer-consistent installation finish.
Choosing the Right Model
- Choose this model if: You are mounting a Hanwha QNO, HCO, or SCO series camera from the confirmed compatibility list and need a manufacturer-matched junction box to manage conduit cabling at the wall mount point cleanly.
- Choose a different model if: Your camera model is not listed in the confirmed compatibility groups, or if you are mounting an indoor dome or turret camera where a surface conduit junction box is not required. Hanwha offers other mounting accessories suited to different camera housings and installation scenarios.
FAQs
- Which Hanwha cameras is the SBO-100B1 compatible with?
The SBO-100B1 is confirmed compatible with the QNO-6010R through QNO-8030R bullet camera range, the HCO-6080 through HCO-7080RV series, and the SCO-6083R and SCO-6085R models. It is also suited to the PNF-9010R series. Always check your specific camera model against the compatibility list before ordering.
- What are the dimensions of the SBO-100B1?
The junction box measures 125.6 x 45mm. These dimensions are designed to align with the base of compatible Hanwha bullet camera housings, keeping the installation footprint compact at the wall surface.
- How many conduit entries does the SBO-100B1 provide?
The SBO-100B1 has 2 conduit holes, allowing cable to be routed from either direction along the wall surface. This is particularly useful when conduit direction is constrained by the structure of the building rather than installer preference.
- Is the SBO-100B1 suitable for outdoor installations?
The aluminium housing is suited to outdoor use in the environments where compatible QNO and HCO cameras are typically deployed, such as perimeter walls, car parks, and industrial facades. It is intended to be used in combination with the camera’s own weatherproofing rather than as a standalone weatherproof enclosure.
- Where can I obtain the datasheet for the SBO-100B1?
The official Hanwha Wisenet datasheet for the SBO-100B1 is linked in the Additional Information section below. It covers mounting dimensions and compatibility details. The SBO-100B1 is available through Security Wholesalers as part of the Hanwha mounts and accessories range for trade and installer supply.
Additional Information
