Product SKU: XNV-C8083R
Product Overview
Built for ceiling and soffit mounting in demanding indoor and outdoor environments, the Hanwha Vision XNV-C8083R is a 6MP AI vandal dome camera engineered for commercial and institutional surveillance where both image detail and analytical intelligence are required. Featuring a 4.4-9.3mm motorised varifocal lens, it allows remote zoom and focus adjustment without physically repositioning the unit, which makes it practical for entry points, corridors, car parks, and perimeter-facing mounting positions. Equipped with WiseIR illumination reaching up to 40m and extremeWDR rated at 120-150dB, the XNV-C8083R maintains usable footage through high-contrast lighting and complete darkness. It also integrates AI-based detection and classification of people, vehicles, faces, and licence plates, alongside behavioural analytics including intrusion detection, loitering, and line crossing. The housing carries IP66, IP67, IK10, and NEMA4X ratings, making it appropriate for exposed outdoor installation where impact and weather resistance are non-negotiable.
Key Capabilities
6MP Resolution on a 1/1.8″ Sensor
The 1/1.8″ CMOS sensor captures video at 3328 x 1872 at up to 30fps, delivering the image detail needed to distinguish individuals, read signage, and identify vehicles across wide coverage zones in commercial and institutional settings.
Motorised Varifocal Lens (4.4-9.3mm)
The 2.1x motorised varifocal lens lets installers remotely adjust zoom and field of view after the camera is mounted and cabled. This is especially useful in corridors, entrances, and perimeter locations where precise framing cannot always be confirmed before installation is complete.
AI Object Detection and Behavioural Analytics
Onboard AI classifies people, vehicles, faces, and licence plates, and triggers alerts for intrusion, loitering, and line crossing. This shifts monitoring from reactive to proactive, reducing the volume of irrelevant motion alerts in high-traffic areas.
WiseIR Night Vision up to 40m
Integrated WiseIR illumination adapts IR intensity based on the subject distance to prevent overexposure at close range, maintaining consistent and usable footage in low-light and zero-light conditions up to approximately 40 metres.
IK10 Vandal-Resistant Housing with IP66/IP67 and NEMA4X
The dome housing is rated IK10 for impact resistance and IP66/IP67 and NEMA4X for weatherproofing, making the XNV-C8083R appropriate for public-facing installations and exposed external mounting positions where tamper and environmental risk are ongoing concerns.
Best For
- Perimeter Entry Points: The motorised varifocal lens and 40m WiseIR range make this camera well suited to building entrances and gate approaches where framing precision and night visibility are both required.
- Car Parks and Loading Areas: AI-based vehicle detection and 6MP resolution allow the camera to monitor movement across open areas and support after-incident review with sufficient image detail.
- Retail and Commercial Interiors: The vandal-resistant dome form and AI people detection suit busy public-facing indoor environments including retail floors, lobbies, and corridors where ceiling mounting is standard.
- High-Contrast Lighting Environments: The extremeWDR rated at 120-150dB addresses locations where bright daylight and deep shadow coexist, such as covered car park entries, loading dock doors, and glass-fronted building entrances.
Why Choose the XNV-C8083R
The XNV-C8083R sits in a practical position for installers who need AI analytics and flexible optics in a vandal-resistant dome format. The motorised varifocal lens means field-of-view decisions do not have to be finalised before the camera is physically mounted, which reduces rework on commercial sites. The AI engine goes beyond standard motion detection by classifying object types and triggering behavioural events, which is meaningful for sites where alert fatigue from generic motion triggers is a real operational issue. The 1/1.8″ CMOS sensor gives the 6MP output a larger photon-capture area than smaller-format sensors at the same resolution, supporting better low-light performance before the IR illuminator activates. Combined with IK10 impact resistance, IP67 sealing, and NEMA4X certification, the XNV-C8083R is available at Security Wholesalers as a well-specified option for commercial installations that require durability, analytical capability, and optical flexibility in a single dome-format unit.
Buyer Decision Tips
Motorised Varifocal vs Fixed Lens: The 4.4-9.3mm motorised varifocal range of the XNV-C8083R covers a meaningful zoom span for a dome camera, shifting from a broader field suitable for open areas to a tighter view appropriate for entry monitoring. If your installation site has a fixed, well-known coverage requirement and cost is a priority, a fixed-lens dome may be sufficient. Choose the varifocal if the coverage zone may need refinement after installation, or if the same camera model needs to serve multiple site types across a project.
AI Analytics and VMS Compatibility: The AI capabilities of the XNV-C8083R, including behavioural event triggers and object classification, deliver the most value when integrated into a video management system that can act on those metadata outputs. Confirm that your NVR or VMS platform supports Hanwha AI event streams before relying on edge-based analytics as a core part of the monitoring workflow.
Key Features & Technical Specifications
| Model |
Hanwha Vision XNV-C8083R |
| Resolution |
6MP (3328 x 1872) |
| Image Sensor |
1/1.8″ CMOS |
| Lens Type |
Motorised varifocal |
| Focal Length |
4.4-9.3mm (2.1x zoom) |
| Frame Rate |
Up to 30fps |
| IR Range |
Up to approximately 40m (WiseIR) |
| Wide Dynamic Range |
extremeWDR, 120-150dB |
| Video Compression |
H.265, H.264, MJPEG |
| AI Analytics |
People, vehicle, face, and licence plate detection and classification; intrusion, loitering, line crossing |
| Local Storage |
microSD card support |
| Weather Protection |
IP66, IP67, NEMA4X |
| Vandal Resistance |
IK10 |
| Camera Type |
Vandal dome |
Ideal Use Cases
Building Entrances and Lobbies
The dome profile suits ceiling mounting at entry points where appearance matters. AI face and people detection adds operational value at access-controlled entry points in commercial buildings and multi-tenanted facilities.
Covered and Open Car Parks
The 6MP resolution and AI vehicle detection support both incident review and real-time alerting in car parks. The extremeWDR handles the contrast between shaded lower levels and daylight entry points where overexposure is a common problem.
Retail Floors and Corridors
The ceiling-mounted vandal dome form is unobtrusive in customer-facing environments. AI people detection and loitering alerts provide operational analytics alongside standard security monitoring in retail and hospitality settings.
Perimeter Walls and External Mounting Points
IP67 sealing, IK10 impact resistance, and NEMA4X certification allow the XNV-C8083R to be installed on exposed external surfaces. The 40m WiseIR range and intrusion detection analytics suit fence-line and perimeter approaches on commercial and industrial sites.
Schools and Institutional Facilities
The IK10-rated dome housing resists tampering in high-traffic public areas. AI-based behavioural detection including loitering and line crossing supports monitoring of access-restricted zones in educational and government buildings.
Choosing the Right Model
- Choose this model if: You need a vandal-resistant dome with AI behavioural analytics, a motorised varifocal lens for post-installation framing adjustment, and full outdoor weatherproofing including IK10, IP67, and NEMA4X ratings across a commercial or institutional site.
- Choose a different model if: Your installation site requires a fixed focal length to reduce cost and complexity, or if you need active deterrence features such as an audible siren or visible warning light built into the camera housing. A bullet-format camera may also be preferable for highly directional long-range outdoor approaches where the dome profile offers no mounting advantage.
FAQs
- What AI analytics does the XNV-C8083R support?
The camera detects and classifies people, vehicles, faces, and licence plates using its onboard AI engine. It also triggers behavioural event alerts for intrusion, loitering, and line crossing. These analytics operate at the edge, meaning the camera processes the classifications without requiring a dedicated server-side AI module.
- Can the lens be adjusted after the camera is installed and cabled?
Yes. The motorised varifocal lens covers 4.4-9.3mm and can be adjusted remotely via the camera’s web interface or compatible VMS. This removes the need to physically reposition the camera after the cabling run is complete, which is a practical advantage on multi-point commercial installations.
- Is the XNV-C8083R suitable for installation in exposed outdoor locations?
Yes. The housing is rated IP66 and IP67 for water and dust ingress, IK10 for resistance to physical impact, and NEMA4X for outdoor environmental protection. These ratings make it appropriate for exposed external walls, eaves, and perimeter mounting points, not just sheltered indoor or undercover positions.
- What is the benefit of the 1/1.8″ sensor size at 6MP?
A larger sensor format at 6MP means each pixel captures more light compared to a smaller-format sensor at the same resolution. This supports better low-light performance before the IR illuminator activates, and reduces noise in footage captured at dusk, dawn, or in artificially lit indoor environments with variable illumination.
- Does the XNV-C8083R support local storage?
Yes. The camera includes a microSD card slot for local edge storage. This can serve as a backup recording option if the primary network connection or NVR is unavailable, depending on the recording configuration used. Through Security Wholesalers, the XNV-C8083R is supplied as a standalone camera unit, with storage cards available separately.
- How does extremeWDR affect footage quality at building entrances?
Building entrances commonly produce high-contrast scenes where the exterior is brightly lit and the interior is relatively dark, or vice versa. The extremeWDR rated at 120-150dB on the XNV-C8083R processes these contrast differences to retain visible detail in both the bright and shadowed areas of the same frame, reducing overexposed or silhouetted subjects that make identification difficult.
Additional Information
