Product SKU: PNM-C16083RVQ
Product Overview
Wide-area monitoring from a single ceiling mount is the defining strength of the Hanwha PNM-C16083RVQ, a 4-sensor dome camera built for commercial and public-space installations where blanket directional coverage matters as much as reducing infrastructure costs. Each of its 4 independent 1/2.8-inch CMOS sensors delivers 4 MP resolution at 2592 x 1520, combining for up to 16 MP of simultaneous multi-directional awareness from one compact ø250 mm aluminium housing. Featuring 3.3-5.7 mm motorised varifocal lenses on all 4 channels, installers can tune each direction individually to frame specific zones across large open areas. Equipped with deep-learning AI analytics including person, face, vehicle, and licence plate classification, the PNM-C16083RVQ delivers actionable intelligence at the edge rather than relying solely on back-end processing. It also integrates WiseStream III compression, dual SD edge storage up to 1 TB, 120 dB WDR, and 15 m WiseIR illumination. Rated IP66, IK10, and NEMA 4X, it is well suited to exposed outdoor and undercover ceiling mounts across transport hubs, retail complexes, campuses, and logistics yards.
Key Capabilities
4 x 4 MP Multi-Sensor Coverage
Four independent sensors deliver 16 MP of combined coverage from a single ceiling mount. This removes the need for multiple single-channel cameras across large open spaces, cutting cabling, bracket, and licence costs significantly on complex sites.
Per-Channel Motorised Varifocal Lenses
Each of the 4 channels carries a 3.3-5.7 mm motorised varifocal lens with a horizontal field of view ranging from 100 degrees (wide) to 53 degrees (telephoto). Installers can set each direction independently to match zone depth and framing requirements without a physical lens swap.
Deep-Learning AI Analytics
On-board AI classifies people, faces, vehicles, and licence plates, and triggers event rules for loitering, line crossing, intrusion, defocus, tampering, and sound classification. Analytics run at the edge, reducing server load and enabling faster alarm response across all 4 channels simultaneously.
120 dB WDR and Low-Light Performance
A 120 dB wide dynamic range keeps detail visible in high-contrast scenes such as covered car parks with direct sunlight at entry points. Minimum illumination reaches 0.0075 Lux in monochrome mode, with 15 m WiseIR allowing useful footage in complete darkness.
WiseStream III Compression and Dual Edge Storage
WiseStream III content-adaptive encoding reduces bandwidth and storage consumption compared to standard H.265. Dual micro SD/SDHC/SDXC slots support up to 1 TB total local storage, enabling edge recording for continuous or event-triggered backup independent of the network recorder.
TPM 2.0 Cybersecurity Architecture
A hardware-based TPM 2.0 secure chip with FIPS 140-2 Level 2 certification protects cryptographic keys and supports signed firmware validation. This level of cybersecurity architecture is particularly relevant to government, critical infrastructure, and enterprise deployments with compliance requirements.
Best For
- Transport Terminals and Station Concourses: The 4-channel multi-directional layout monitors passenger flow from all angles simultaneously, with AI loitering and intrusion detection covering multiple gates or platforms from a single overhead mount.
- Retail Mall Atria and Concourses: Wide-area coverage across large open floorplates reduces camera count, while person and vehicle classification supports queue management and after-hours perimeter detection.
- Campus Intersections and Courtyards: A single PNM-C16083RVQ mounted overhead at a pathway intersection can cover all approach directions, replacing 3 or 4 individual cameras that would otherwise require separate conduit runs and mounting hardware.
- Open-Air and Covered Car Parks: The 120 dB WDR handles the contrast between shaded interiors and bright entry points, while licence plate classification at the edge supports vehicle activity logging without additional VMS processing.
- Logistics Yards and Industrial Facilities: IP66, IK10, and NEMA 4X ratings ensure continued operation in dusty, wet, or chemically exposed outdoor environments, and the -40 degrees C cold-start rating suits facilities in harsh climates.
Why Choose the PNM-C16083RVQ
Where a standard single-sensor camera covers one direction, the PNM-C16083RVQ covers 4 simultaneously, each with its own 4 MP sensor, independently adjustable motorised lens, and full AI analytics pipeline. This is not a fisheye camera with a single heavily distorted image: each channel produces a clean, rectilinear 4 MP stream that can be de-warped, cropped, and analysed individually. The deep-learning AI running across all 4 channels includes licence plate and face classification that simpler multi-sensor cameras do not provide natively at the edge. The dual SD slots allowing up to 1 TB of local storage and the TPM 2.0 / FIPS 140-2 Level 2 security architecture set this model apart for compliance-conscious deployments. Available at Security Wholesalers, the PNM-C16083RVQ represents a practical reduction in per-location infrastructure spend on large commercial, campus, and public-space projects.
Buyer Decision Tips
PoE+ Switch Requirement: The PNM-C16083RVQ draws up to 25.5 W and requires a PoE+ switch or injector rated to IEEE 802.3at Type 2. Standard 802.3af PoE switches that provide a maximum of 15.4 W per port will not power this camera. Confirm your switch port budget before installation, particularly on multi-camera deployments where port wattage is shared across a switch backplane.
Per-Channel Zone Calibration: Because each of the 4 motorised lenses covers a distinct directional zone, AI analytics rules such as line-crossing boundaries and intrusion polygons must be configured separately for each channel. Allow additional commissioning time compared to a single-sensor camera, and confirm that your VMS or NVR can ingest and display all 4 streams simultaneously without channel licensing gaps.
Key Features & Technical Specifications
| Model |
PNM-C16083RVQ |
| Image Sensor |
1/2.8-inch CMOS x 4 |
| Max Resolution |
2592 x 1520 (4 MP per channel, 16 MP combined) |
| Lens |
3.3-5.7 mm motorised varifocal (F1.5-F1.9) per channel |
| Field of View (H/V/D) |
100-53 degrees / 54-30 degrees / 125-61 degrees |
| Min Illumination |
Colour 0.075 Lux @ F1.5 / B&W 0.0075 Lux / 0 Lux (IR on) |
| WDR |
120 dB |
| IR Range |
15 m (WiseIR) |
| AI Analytics |
Person, face, vehicle, licence plate classification; loitering, intrusion, line crossing, defocus, tampering, audio, sound classification |
| Compression |
H.265, H.264, MJPEG / WiseStream III |
| Audio I/O |
1 In (selectable Mic/Line), 1 Out (Line) |
| Alarm I/O |
2 configurable (extendable via SPM-4210) |
| Network Interface |
10/100/1000 Base-T RJ-45 |
| Protocols |
IPv4/IPv6, HTTP(S), RTSP, SNMP, MQTT, ONVIF S/T compatible |
| Edge Storage |
Dual Micro SD/SDHC/SDXC slots (max 1 TB total) |
| Power |
PoE+ (IEEE 802.3at Type 2), typical 22 W / max 25.5 W |
| Operating Temperature |
-40 degrees C to +55 degrees C (cold start at -35 degrees C or above) |
| Ingress / Impact / Corrosion Rating |
IP66 / IK10 / NEMA 4X |
| Dimensions / Weight |
ø250 x 114.2 mm / 2.73 kg |
| Body Material |
Aluminium, white RAL 9003 |
| Cybersecurity |
TPM 2.0 with FIPS 140-2 Level 2 certification, signed firmware |
| Certifications |
FCC, CE, RCM, UL 62368-1 / IP66 / IK10 / NEMA 4X |
Ideal Use Cases
Transport Terminals
Airports, train stations, and bus interchanges benefit from the PNM-C16083RVQ’s 4-direction coverage at concourse decision points. AI loitering and intrusion detection across all channels supports security staff with automated alerts across high-footfall zones.
Shopping Centre Concourses
A single ceiling-mounted PNM-C16083RVQ at a central atrium or food court intersection replaces 3-4 individual cameras. Person and vehicle classification at the edge reduces the processing demand on central VMS servers during busy trading periods.
Campus and University Grounds
Outdoor courtyard intersections and pedestrian pathways on education campuses can be covered comprehensively from a single overhead mount. The NEMA 4X and IP66 rating handles all-weather outdoor exposure, and the -40 degrees C operating range suits campuses in cold climates.
Car Parks and Entry Plazas
The 120 dB WDR handles the harsh contrast at car park entry and exit points. Built-in licence plate classification supports vehicle logging directly at the edge, and dual SD storage up to 1 TB retains local records independent of NVR connectivity.
Logistics Yards and Industrial Sites
Loading dock intersections and yard entry zones require durable, low-maintenance cameras. The IK10 vandal rating, NEMA 4X corrosion resistance, and wide operating temperature range make the PNM-C16083RVQ suitable for chemical, food processing, and heavy industrial environments.
Choosing the Right Model
- Choose this model if: You need simultaneous multi-directional 4 MP coverage from a single ceiling mount, require on-board AI classification including licence plates and faces, need compliant cybersecurity with TPM 2.0 and FIPS 140-2, and have a PoE+ switch infrastructure capable of 25.5 W per port.
- Choose a different model if: Your coverage requirement is a single fixed direction only, in which case a standalone fixed or varifocal dome will deliver higher per-channel resolution at lower cost. If you need optical zoom beyond 1.7x with the ability to dynamically reposition between scenes, a motorised PTZ camera would be more appropriate. If your network switch is limited to standard 802.3af PoE (15.4 W), this camera cannot be powered without a switch upgrade or a standalone PoE+ injector.
FAQs
- How does a 4-sensor dome reduce installation costs compared to using 4 separate cameras?
A single PNM-C16083RVQ requires one cable run, one PoE+ port, one mounting bracket, and one NVR channel licence per sensor rather than separate brackets, conduit runs, and power drops for each camera. On large commercial sites with dozens of intersection points, the savings in materials and labour can be significant across the full project scope.
- Can each lens direction be adjusted and configured independently?
Yes. Each of the 4 channels has its own 3.3-5.7 mm motorised varifocal lens that can be set to a different focal length and field of view independently. AI event zones such as line-crossing boundaries and intrusion polygons are also configured per channel, giving installers precise control over what each direction monitors and triggers on.
- What AI classifications and event types does this camera support natively?
The PNM-C16083RVQ classifies people, faces, vehicles, and licence plates at the edge using deep-learning inference. Event detection includes loitering, intrusion, line crossing, virtual area monitoring, defocus detection, tampering, audio detection, and sound classification. All of these run on-board without requiring a separate AI processing server.
- Does this camera require PoE or PoE+ to operate?
It requires PoE+ (IEEE 802.3at Type 2) with a maximum draw of 25.5 W. Standard PoE (802.3af) switches that cap at 15.4 W per port are not sufficient. You will need to confirm that each switch port allocated to this camera is rated for PoE+ and that the switch’s total power budget can accommodate the full installed camera count.
- Can the camera store footage locally without an NVR?
Yes. Dual micro SD/SDHC/SDXC slots support up to 1 TB of total local storage. Edge recording can be configured for continuous or event-triggered modes, providing a local backup that remains accessible even if the network connection to the NVR is interrupted. This is particularly useful in remote installations with unreliable network links.
- How does the TPM 2.0 security chip benefit enterprise and government installations?
The hardware TPM 2.0 chip with FIPS 140-2 Level 2 certification stores cryptographic keys in tamper-resistant hardware rather than software, and supports signed firmware validation to prevent unauthorised firmware modification. This architecture meets cybersecurity baseline requirements for many government, critical infrastructure, and finance sector deployments, and is one reason the PNM-C16083RVQ is available through Security Wholesalers as part of the Hanwha P Series premium range.
- What mounting brackets are compatible with this camera?
Hanwha’s SBP-250HMW and SBP-276HMW hanging mounts are confirmed compatible, along with other Wisenet series brackets. Because the camera weighs 2.73 kg, the mounting surface and bracket load rating should be verified before installation, particularly for suspended ceiling tile mounts or single-fixing pendant arms.
Product Video Samples
Additional Information
