Product SKU: HanwhaKit_4CH
Product Overview
Purpose-built for small commercial premises, shopfronts, and residential properties requiring complete outdoor coverage, this Hanwha Wisenet NEW-Q 4-channel kit pairs 4 x HAN-QNE-8011R 5MP flateye cameras with the HAN-QRN-430S PoE NVR and a pre-installed 3TB surveillance-grade HDD. The flateye turret design keeps the profile compact for eave, soffit, and wall mounting while delivering IP67 weatherproofing and IK10 vandal resistance at every camera position. Equipped with H.265 compression and WiseStream II technology, the system can cut bandwidth consumption by up to 75 percent compared to H.264 alone, extending the practical life of the 3TB storage. Featuring 120dB Wide Dynamic Range and 20m IR illumination, the cameras maintain clear imagery across high-contrast scenes and through complete darkness. With PoE connectivity on all 4 ports, a single Cat5e or Cat6 run to each camera carries both power and data, making installation straightforward with no separate power cabling required.
Key Capabilities
5MP Flateye Resolution
Each HAN-QNE-8011R captures at 2592 x 1944 at up to 30fps, providing enough detail for forensic review of faces and licence plates. The flat-lens design also eliminates the dome cover that can be scratched or fogged over time on conventional turret cameras.
H.265 and WiseStream II Compression
WiseStream II combined with H.265 reduces bandwidth and storage requirements by up to 75 percent versus H.264. On a 4-camera system with a 3TB HDD, this translates directly into longer continuous recording retention without upgrading storage.
120dB Wide Dynamic Range
The 120dB WDR rating handles scenes where bright exterior light and shaded indoor areas appear in the same frame, such as shopfronts, entry points, and driveways. Detail is retained in both the bright and dark zones simultaneously.
IP67 and IK10 Outdoor Protection
All 4 cameras are fully dust-sealed and rated to withstand sustained water ingress, along with IK10 impact resistance. This suits exposed mounting positions on exterior walls and eaves where weather and physical contact are ongoing concerns.
4-Port PoE NVR with 3TB Pre-Installed
The HAN-QRN-430S powers and connects all 4 cameras over a single cable run per camera. The 3TB surveillance HDD is pre-installed and supported by up to 40Mbps total throughput and 8MP recording capability, ready to record immediately out of the box.
Best For
- Small Commercial Premises: Four camera positions cover entry points, car parks, and rear access areas typical of small retail shops, offices, and service businesses.
- Exposed Outdoor Mounting: IP67 and IK10 ratings mean these cameras can be installed on exterior eaves, walls, and soffits without sheltering.
- High-Contrast Environments: The 120dB WDR makes this system appropriate for entrances and driveways where direct sunlight and shadow appear in the same shot throughout the day.
- Simplified Single-Cable Runs: PoE on all 4 NVR ports suits installers working in locations where running separate power to each camera is impractical or cost-prohibitive.
Why Choose the Hanwha 5MP NEW-Q Flateye 4-Channel Kit
Where a basic entry-level kit relies on standard H.264 compression and generic weatherproofing, this Hanwha Wisenet NEW-Q bundle delivers a meaningful step up at every component. The HAN-QNE-8011R cameras carry IK10 vandal resistance alongside IP67 weatherproofing, a combination not always present on cameras at this price tier. WiseStream II with H.265 means the 3TB HDD works harder for longer before footage cycles, rather than requiring an upgrade within months. The HAN-QRN-430S NVR supports up to 8MP recording per channel, so the system is not bottlenecked by the recorder if camera positions are later reviewed. The 2.8mm fixed lens provides a wide field of view suited to monitoring open areas and approaches without requiring manual focus adjustment on-site. Available through Security Wholesalers, this kit is supplied as a matched Hanwha Wisenet system, so component compatibility is confirmed rather than assumed.
Package Inclusions
Buyer Decision Tips
Fixed Lens Coverage Planning: All 4 cameras ship with a 2.8mm fixed lens, which produces a wide field of view well suited to open yards, car parks, and wide building frontages. For tighter corridors, longer driveways, or situations where you need to read number plates at distance beyond 8-10m, a 4mm lens variant may suit better. Confirm your mounting positions and approximate distances before installation, since these lenses are not adjustable after purchase.
Storage Retention Estimate: The 3TB HDD combined with H.265 and WiseStream II compression gives practical continuous recording at 5MP across all 4 cameras. Actual retention depends on motion levels, scene complexity, and frame rate settings. For sites with high activity throughout the day, configuring motion-triggered or scheduled recording in the NVR settings will extend retention beyond what continuous 30fps recording would provide.
Key Features & Technical Specifications
| Kit SKU |
HanwhaKit_4CH |
| Camera Model |
HAN-QNE-8011R (Hanwha Wisenet NEW-Q 5MP Flateye) |
| NVR Model |
HAN-QRN-430S (Hanwha Wisenet NEW-Q 4-Channel PoE NVR) |
| Camera Resolution |
5MP (2592 x 1944) |
| Frame Rate |
Up to 30fps @ 5MP |
| Lens |
2.8mm fixed (also available in 4mm) |
| IR Range |
20m |
| Minimum Illumination |
0.15 Lux (colour), 0 Lux (B/W with IR) |
| Wide Dynamic Range |
120dB |
| Compression |
H.265, H.264, MJPEG with WiseStream II support |
| Weatherproofing |
IP67 |
| Vandal Resistance |
IK10 |
| Local Storage |
Micro SD / SDHC / SDXC up to 128GB per camera |
| NVR Channels |
4 channels |
| NVR Max Recording Resolution |
Up to 8MP (4K) per channel |
| NVR Bandwidth |
40Mbps total |
| NVR Storage |
1 x SATA bay, up to 6TB max, 3TB surveillance HDD pre-installed |
| Power |
PoE (cameras powered via NVR) |
| Additional Camera Features |
Hallway view mode, LDC, tampering detection, motion detection, defocus detection |
Ideal Use Cases
Small Retail and Service Businesses
Four camera positions cover front entry, rear access, car park, and internal approaches typical of a small shop or service centre. The 120dB WDR handles the high-contrast lighting at shopfront glass doors common in retail environments.
Residential Property Perimeter
IP67 and IK10 protection on each camera means they can be mounted on eaves and exterior walls without weatherproof enclosures. The 20m IR range covers driveways, side gates, and yard access points through the night without supplementary lighting.
Small Office and Workplace Entry
The hallway view mode on the HAN-QNE-8011R rotates the image to a portrait aspect ratio, making it suitable for narrow corridor installations such as office hallways and stairwells where standard landscape framing wastes significant field of view.
Car Parks and Open Yards
The wide 2.8mm fixed lens covers a broad area from a single mounting point, reducing the number of camera positions needed across an open car park or fenced yard. The 5MP resolution supports zoomed forensic review of vehicle details during playback.
Remote and Unattended Sites
With PoE powering all cameras from the NVR and a pre-installed 3TB surveillance HDD, the system can operate at a remote site with minimal on-site infrastructure. Each camera also supports a local micro SD card of up to 128GB as a redundant recording fallback.
Choosing the Right Model
- Choose this kit if: You need a complete 4-camera outdoor system with a pre-installed HDD, confirmed Hanwha component compatibility, IK10 vandal resistance, and simplified PoE wiring across all positions.
- Choose a different configuration if: You need more than 4 camera positions, require a varifocal or motorised zoom lens to cover longer distances or tighter focal points, or need a larger HDD capacity for extended retention at high frame rates. An 8-channel NVR kit or a system with 4mm lens cameras would better suit those requirements.
FAQs
- What does the flateye design mean compared to a standard dome camera?
The HAN-QNE-8011R uses a flat front lens rather than a protruding dome bubble. This eliminates the dome cover that can accumulate scratches, dust, and water marks over time. It also removes the step of fitting and aligning a separate dome cover during installation, which reduces on-site time. The flat lens profile is slightly more exposed but is backed by IK10 impact resistance.
- Does the 3TB HDD come pre-installed and ready to record?
Yes. The 3TB surveillance-grade HDD is pre-installed in the HAN-QRN-430S NVR. The system is designed so that once cameras are connected and basic network settings are confirmed, recording can begin without sourcing or fitting a separate drive. The NVR supports up to 6TB via a single SATA bay if additional storage capacity is required in the future.
- How much recording time will the 3TB HDD provide across all 4 cameras?
Actual retention depends on recording mode, scene complexity, and frame rate. With H.265 and WiseStream II enabled at 5MP, the compression efficiency extends recording duration substantially compared to H.264-only systems. For most small commercial sites with moderate motion, continuous recording across all 4 channels typically yields several weeks of footage. Motion-triggered recording will extend this further.
- Can the cameras be mounted on an exterior wall or eave without a separate weatherproof enclosure?
Yes. Each HAN-QNE-8011R is rated IP67, meaning it is fully protected against dust ingress and sustained water immersion. The cameras can be surface-mounted directly on exterior walls, eaves, and soffits without any additional housing. The IK10 rating also means they withstand direct impact at those mounting positions.
- What cabling does this system require between the NVR and each camera?
Each camera connects to the NVR using a single Cat5e or Cat6 Ethernet cable. PoE is delivered over the same cable, so no separate power run is needed at each camera location. Maximum recommended PoE cable length is 100m per IEEE 802.3 standard. Longer runs require a PoE extender.
- Does the NVR support remote viewing?
The HAN-QRN-430S connects to a local network and supports remote access via Hanwha’s mobile application and web interface. Remote viewing requires the NVR to have an active internet connection and appropriate network configuration such as port forwarding or a compatible cloud connection service supported by the platform.
- Is this kit sold and supported in Australia?
Yes. This Hanwha Wisenet NEW-Q 4-channel kit is part of the Security Wholesalers range, supplied as a matched system with Australian-compatible components. All included products are Hanwha Wisenet NEW-Q series, ensuring full compatibility between the cameras, NVR, and storage without cross-brand integration concerns.
Cabling Considerations
- Cable Type: Cat5e or Cat6 Ethernet cable for all camera-to-NVR runs. Cat6 is recommended for runs approaching the maximum distance or where the cable passes through areas with electrical interference.
- Maximum PoE Cable Run: 100m per camera from the NVR PoE port, in line with IEEE 802.3 PoE standards. Runs exceeding 100m require a PoE extender to maintain power and signal integrity.
- Power Cabling: No separate power cable is required at each camera. All 4 cameras receive power directly from the NVR via the PoE Ethernet run.
- Wiring Tips: Run cables through conduit on exterior surfaces to protect against UV degradation and physical damage. Terminate all connectors with weatherproof boots at outdoor camera positions to prevent moisture ingress at the RJ45 connection point.
Additional Information
