Dahua DH-PFA134 Waterproof Aluminium Junction Box for Security Cameras, 1kg Load Capacity

Product SKU: DH-PFA134

Product Overview

The Dahua DH-PFA134 is a compact waterproof junction box designed to provide a cleaner mounting point and protected cable space for compatible security cameras. Its circular aluminium and SECC construction measures 90mm in diameter and 35mm high, making it suitable for installations where network, video or power connectors need to be concealed behind the camera rather than left exposed. An M20, also identified as G1/2-inch, threaded cable entry supports the supplied waterproof joint, while the box carries a listed maximum load of 1kg. It operates from -40°C to +60°C at up to 90% relative humidity and is supplied with mounting screws, plastic anchors, a waterproof joint and a wrench. Camera compatibility must be checked against the applicable accessory selection because mounting patterns and supported loads vary between models. No numerical IP rating is stated, so correct sealing and installation remain essential.

Key Capabilities

Best For

• Outdoor Camera Installations: Conceals compatible camera connectors and provides a defined waterproof cable-entry arrangement.
• Building Entrances: Creates a cleaner mounting finish around cameras positioned above doors, reception areas and pedestrian access points.
• Retail and Office Sites: Helps organise camera cabling around shopfronts, corridors, loading areas and external walls.
• Wall or Ceiling Mounting: Supports compatible lightweight camera arrangements where a compact circular junction box is required.

Why Choose the DH-PFA134

The DH-PFA134 is a better choice than leaving camera connectors exposed against a wall or ceiling. It provides a dedicated space for cable joints, supports a tidier finish and gives installers a defined threaded entry for the supplied waterproof joint. Its compact 90mm body suits compatible cameras without adding the bulk of a large enclosure, while the 1kg load rating covers selected lightweight camera arrangements. Available through Security Wholesalers, this junction box should be selected only after confirming the camera’s approved accessory list, mounting-hole pattern and cable requirements. A common mistake is to treat every round Dahua junction box as interchangeable. The PFA134 uses a specific M20 or G1/2-inch entry and does not have a numerical IP rating stated, so compatibility and sealing should be checked before installation.

Buyer Decision Tips

Key Features & Technical Specifications

Product Type	Waterproof security camera junction box.
Model	DH-PFA134.
Material	Aluminium and SECC.
Colour	White.
Dimensions	90mm diameter × 35mm high.
Cable-Entry Thread	M20, also identified as G1/2-inch.
Load Capacity	Up to 1.0kg.
Product Weight	0.26kg.
Operating Temperature	-40°C to +60°C.
Operating Humidity	0%-90% relative humidity.
Camera Compatibility	Must be confirmed through the applicable camera accessory selection.
Included Components	One junction box, three M4x10 screws, three ST4x25 screws, three plastic anchors, one waterproof joint and one wrench.

Ideal Use Cases

Choosing the Right Model

• Choose this model if: The compatible camera requires a compact 90mm junction box with an M20 or G1/2-inch cable entry.
• Choose a different junction box if: The camera’s accessory list specifies another mounting pattern, thread or enclosure.
• Choose a higher-capacity mount if: The supported camera and attached components exceed 1kg.
• Confirm the enclosure rating if: A project specification requires a stated numerical IP or corrosion rating.
• Confirm the fixings if: The supplied screws and anchors are not suitable for the wall, ceiling or adapter being used.

FAQs

1. What is the DH-PFA134 junction box used for?
   The DH-PFA134 is a waterproof junction box for compatible Dahua security cameras and mounting arrangements. It provides a protected space for cable connections and can help create a cleaner installation by concealing connectors behind the camera. Compatibility should be checked against the camera’s approved accessory selection because the mounting pattern, load, thread and cable-entry requirements are not identical across all camera models.
2. Is the DH-PFA134 suitable for outdoor camera installations?
   The DH-PFA134 is described as a waterproof junction box and operates from -40°C to +60°C at up to 90% relative humidity. However, the supplied specification does not provide a numerical IP rating. Outdoor performance therefore depends on correct assembly, use of the supplied waterproof joint, suitable cable sealing and proper preparation of the wall or mounting surface.
3. How much weight can the DH-PFA134 support?
   The DH-PFA134 has a listed load-bearing capacity of 1.0kg. The combined weight of the camera and any components supported directly by the junction box must remain within this limit. Installers should also verify the fixing method and mounting surface because the supplied screws and plastic anchors may not suit every wall, ceiling, pole-adapter or construction material.
4. Which cable-entry thread does the DH-PFA134 use?
   The junction box uses an M20 thread, also identified as G1/2 inch. This connection is intended for the supplied waterproof joint or a compatible cable-entry arrangement. Before installation, confirm that the planned conduit, gland or adapter matches the thread and provides enough internal clearance for the camera’s network, video, power or audio connectors.
5. What are the dimensions and weight of the DH-PFA134?
   The DH-PFA134 measures 90mm in diameter and 35mm high, with a listed product weight of 0.26kg. Its compact circular design is intended to sit behind a compatible camera or mounting adapter. Check the camera footprint, screw pattern, wall space and cable bend radius before drilling so the box can close without compressing or sharply bending the connectors.
6. What materials are used in the DH-PFA134?
   The DH-PFA134 is made from aluminium and SECC and is finished in white. The construction provides a practical mounting base and enclosed cable space for compatible security camera installations. The supplied information does not state a specialised coastal or high-corrosion rating, so exposed marine, chemical or highly corrosive locations should be assessed before selecting this junction box.
7. What is included with the DH-PFA134?
   The package includes one waterproof junction box, three M4x10 screws, three ST4x25 screws, three plastic anchors, one waterproof joint and one wrench. A security camera, pole bracket, conduit and installation cable are not listed as included. The installer should confirm whether the supplied screws and anchors are suitable for the actual mounting surface and camera arrangement.
8. What should I confirm before ordering the DH-PFA134?
   Confirm the exact camera model, approved accessory selection, mounting pattern, M20 or G1/2-inch cable entry, total supported weight and installation surface. The box supports up to 1kg and has no numerical IP rating stated in the supplied specification. Security Wholesalers can help check the proposed camera and mounting arrangement for likely compatibility or installation limitations before fitting.

Additional Information

Dahua DH-PFA134 Datasheet