PET FRIENDLY VERSION (SUITABLE UP TO 45KG)
© Security Wholesalers Australia. All rights reserved. https://www.securitywholesalers.com.au/product/bosch-blue-line-tritech-pir-detector-12m-pet-friendly-bdl2-wp12g/
The Blue Line Gen2 TriTech Motion Detectors use a combination of passive infrared (PIR) and microwave detection technologies with advanced signal processing. These small unobtrusive detectors are simple to install and do not need field adjustments.
Mounting
The recommended mounting height is 2.2 m to 2.75 m (7.5 ft to 9 ft) with no adjustments required. Mount the motion detector level, both horizontally and vertically.
Mounting options:
• On a flat wall (surface, semi-flush), with the optional
B335-3 Swiveling low-profile mount, or with the
optional B328 Gimbal-mount Bracket
• In a corner (the junction of two perpendicular walls)
• On the ceiling with the optional B338 Universal
Ceiling-mount Bracket
Technical specifications
Electrical
Current (standby/alarm): 10 mA at 12 VDC
Voltage (operating): 9 VDC to 15 VDC
© Security Wholesalers Australia. All rights reserved. https://www.securitywholesalers.com.au/product/bosch-blue-line-tritech-pir-detector-12m-pet-friendly-bdl2-wp12g/
Environmental
Pet Immunity: One or two pets up to 45 kg (100 lb) or numerous rodents.
Relative Humidity: 0 to 95%, non-condensing
For UL Listed product installations, 0 to 85%, non-condensing
Temperature (operating): -30°C to +55°C (-20°F to +130°F)
For UL Listed product installations, 0°C to +49°C (+32°F to +120°F)
Mechanical
Color: white
Dimensions: 105 mm x 61 mm x 44 mm
(4.2 in. x 2.4 in. x 1.7 in.)
Material: High-impact ABS plastic
Radio Frequency
Interference (RFI) Immunity
No alarm or setup on critical frequencies in the range from 150 kHz to 2 GHz at field strengths less than 30 V/m.
Outputs
Relay: Solid state, supervised, Form A normally-closed (NC) contacts rated for ≤100 mA, 25 VDC, 2.5 W, <20 Ω closed
Tamper: Normally-closed (NC) contacts (with cover on) rated for ≤100 mA, 25 VDC, 2.5 W
Connect tamper circuit to 24-hour protection circuit